We use one of those in our mines in high altitude CO. Actually use alot of Milwaukee Tools in our small scale shafts, but they do job, we sell the paydirt(gold,silver ect mix) to help support our animal rescue military boarding home during deployment. Thanks for sharing the tool in action!🇺🇸🐾
I tried it today with the ortho fogger I hope it works I did my mint and rose bushes and under the porch and everywhere I could think of I hope it works just don’t know how often I’m supposed to spray
Can anyone tell me what to use in this particular fogger. The issue i have is they sell this Burgess fogger here in New Zealand but they dont sell the Black flag fogging mixture thats recommended for use. But i can get an insecticide that can be used but they have no information on ratio and what to mix it with? Obviously i dont want to blow myself up. Ive read you mix with diesel? But i need to confirm this. Anyone out there know? Cheers.
They’re much more efficient than that if you get the rhythm right. With practice you get a feel for it, and the flexing of the pole at full extension works with you.
Of all the SDS MAX videos I've watched tonight, begging to be persuaded, I've yet to be impressed by any of them. A dripping faucet could cut through rock faster than that 💩 hammer
Mix one gallon of kerosene per 4oz of permethrin from farm store. You can make 8 gallons of fogger for about 60 bucks. I've tried it all summer, kills em dead and permethrin can last up to a month in your yard.
you mentioned not tipping it forward or it will become a flame thrower. I just bought one and that was my experience. Thought it was defective. I'll give it another go trying to keep it level, but it it flames this much I'm going to have to return it. Almost burned down some bushes! :)
Yeah...you're probably right, Rob. It was 3.5" diameter...probably 6" being cut on angle to trim close to tree trunk. Good saw, but make that modification to mounting bracket.
Hey Mark! Just a heads up, instead of using paint thinner to put the grip on most golf shops offer grip solvent (juice) which works GREAT! Otherwise...really nice video!!! -Golf Galaxy Store 3019 Vernon Hills, IL
All that is missing. Is ear muffs.
Don't need them with that small drill until you drill into pandecking. That's not going to affect his hearing from that far way outside.
Ez meg mi? Egy életlen fűrész? Bénázás? 🙄🤣
We use one of those in our mines in high altitude CO. Actually use alot of Milwaukee Tools in our small scale shafts, but they do job, we sell the paydirt(gold,silver ect mix) to help support our animal rescue military boarding home during deployment. Thanks for sharing the tool in action!🇺🇸🐾
Nice. Good tool. Thanx for watching.
Go Irish
I used this for 3 years with the bLack fogger chemical and it really doesn’t work.
I tried it today with the ortho fogger I hope it works I did my mint and rose bushes and under the porch and everywhere I could think of I hope it works just don’t know how often I’m supposed to spray
I use a mask AND goggles with this black flag stuff.
What’s the case made out of? Can you weld on it?
Most of the case is steel. I believe the bottom plate is aluminum(magnet wouldn't stick). Hope this helps.
Can anyone tell me what to use in this particular fogger. The issue i have is they sell this Burgess fogger here in New Zealand but they dont sell the Black flag fogging mixture thats recommended for use. But i can get an insecticide that can be used but they have no information on ratio and what to mix it with? Obviously i dont want to blow myself up. Ive read you mix with diesel? But i need to confirm this. Anyone out there know? Cheers.
They’re much more efficient than that if you get the rhythm right. With practice you get a feel for it, and the flexing of the pole at full extension works with you.
Nice 👍
Ther is a kit on home depo for 500 2 batteries charger and free tool included band saw deep cut or a big ass grinder
Thanks for sharing. About to try this to install sign posts in a boulder for our house numbers.
It should work fine. Just use good heavy-duty bits.
Saw Lengths at all 4 positions: Not extended...7' 10.5" 1st extension stop...12' 6.25" 2nd extension stop...16' 9.5" Fully extended stop...20' 9.5" Mark
How long is this thing ?
Not extended...7' 10.5" 1st extension stop...12' 6.25" 2nd extension stop...16' 9.5" Fully extended...20' 9.5" Mark
never try after drilling to touch drill bit it can burn very badly your finger/hand
Thanks gonna have to find some used clubs to do this to :)
Should fog your big trees also
Of all the SDS MAX videos I've watched tonight, begging to be persuaded, I've yet to be impressed by any of them. A dripping faucet could cut through rock faster than that 💩 hammer
Lol
Was that spinning and not on hammer mode?
Spin and hammer for holes. Hammer mode just for breaking rubble. Great tool.
Thanx Mr. Rose. Never tried that...but I'll keep in mind. Mark
Mix one gallon of kerosene per 4oz of permethrin from farm store. You can make 8 gallons of fogger for about 60 bucks. I've tried it all summer, kills em dead and permethrin can last up to a month in your yard.
you mentioned not tipping it forward or it will become a flame thrower. I just bought one and that was my experience. Thought it was defective. I'll give it another go trying to keep it level, but it it flames this much I'm going to have to return it. Almost burned down some bushes! :)
Yeah. KEEP IT LEVEL. Mark
If it is flaming you are doing something wrong - mine has flamed once - key is let it burn for 2 minutes on high before introducing the chemical.
I have 4 of these and use them for firefighting
Do you know your tooth size on your silky blade? I don't have a silky pole saw yet, so I was wondering if it had large or extra large teeth.
Good reference.
🤣🤣🤣
I find that the easiest way to cut stones is to use your bare hands and rip them apart like velcro
It's more so for presition
Need one of these for big wall climbing.
Echo...more like 6 inches.
No hearing protection and sweat pants
Wrong rock.?!
Easy peasy
I'm really sure you can build it yourself. I did this 2 weeks ago thanks to the Woodglut plans.
hey mark, it’s bryan, nice video 😂
Did you measure it correctly... you cut at an angle and it looks to me more like 6”.
Yeah...you're probably right, Rob. It was 3.5" diameter...probably 6" being cut on angle to trim close to tree trunk. Good saw, but make that modification to mounting bracket.
Some nice fabrication work there Bossman
Thanx Scott! Grill was pretty rotted out. Got it going again for around $20 plus some miscellaneous nuts/bolts, etc. Mark
Very helpfull. Thanks
Hey Mark! Just a heads up, instead of using paint thinner to put the grip on most golf shops offer grip solvent (juice) which works GREAT! Otherwise...really nice video!!! -Golf Galaxy Store 3019 Vernon Hills, IL