Video

@toddbuh it was ok very Dusty been better if I'd had others to ride with honestly. I need to try the LOOP3 next time it's just a few miles or so away,more acreage as well.

Hell yeah not a problem brother we will 4 sure

Yeah I noticed a difference as soon as I turned the key

Well you know you did good this weekend. I'm proud of you & your machine. Can't wait to do some more trail riding & get some others to go as well. You need a go pro or an insta 360 a1 pro

Thanks 👍

Yeah miss riding with you ,Johnny & Monte.

Great time last Night. I should have asked Steve if I could sit pass & video ,I've got more on my Go Pro Ford Power THATS 1 BAD MACHINE!

Agreed

I bet the crowd says otherwise

@@roarzilla czcams.com/users/shortsXhZKIn8wk4A

Originally it was done 4 yrs ago when my truck was head studded 2nd time when my intake manifold was replaced. This time I did it myself.

Allready did that no play the turbo is brand new allready found that the Lh v clamp was over torqued & leaking boost at the back of the turbo from replaced it & retorqued the clamp boost issue & sound was fixed.

@@ninjapat66 The Left hand V clamp on the exhaust up pipe into the turbo was over tightened?

@JaegerWrenching yes it was it wasn't leting the lh Ypipe make a good seal to the turbo there was soot blowing past it. Replaced the clamp made sure the Y pipe mated the turbo & then then tourqued the clamp to spec & all is good.

Awesome glad you got it fixed and it was a simple solution! @@ninjapat66

Nope belts are just fine.

maybe loose bolts on exhaust manifold@@ninjapat66

@ShooterAK no it was the V clamp at the back of the turbo

Don't need to it was a clamp all good now

Thank you! No way you're 64mm Turbo is Awesome I knew It wasn't you're Turbo! Plus with youre Type R Lightning Bolt & Eli hooking me up,I'm stoked driving it after some other minor isuues.

True but I can live with a bad clamp at the turbo $25.00 part & it's back to beast mode. Lol

Thanks today I took the hot side & cold side a part cleaned it all up put it all back together & torqued it to spec. I'm taking it to work tomorrow I'm told it's an exhaust leak from one if my friends who works on powerstrokes

The rh up pipe was just replaced 3 months ago when I did my Odawg S2R intake & BPD egr cooler & it was making that noise b4 I replaced them. I never thought about looking at my Lh Y pipe at that time.🥺

Head studded, 4" Exhaust from Turbo back with muffler, bpd egr cooler, Turbo Time 64mm Type S Velocity port turbo,Turbo Time Lightning Bolt Type R VGT Solenoid, 40 hp Ficm Tune, custom tunes. 4" Zone lift on 35" Falken Wildpeaks, Odawg S2R intake CFS intercooler, driven Diesel coolant by pass,S&B cold air intake kit. 230 amp alt battery cable upgrade. Sct x4 Tuner stock injectors, Edge CTS 3 Monitor with EAS sensors for fuel pressure,Degas pressure & Turbo cool down timer.

Thank you👍

Because I have separate pressure transducers I bought from Edge to monitor them with the pigtails to daisy chain them inline like my egt sol & turbo timer. Then you just set pids up on youre screen & name them so you can monitor them.

@@ninjapat66 did not realize they had one for degas bottle or fuel pressure! Thanks a million!

@connorn6378 yes you can get transducers from them for about anything trans temp etc then you have to get the connector that daisy chains in line with the eas setup then set youre pids up on youre monitor & rename them. Just make sure you get a transducers for liquid or fluid for degas & fuel.

Turbo timer?

@chriss.7556 yes a Turbo timer. You can set it by time or temperature to shut youre truck offI have mine set at 350 degrees so when I turn my truck off & lock it up it will run untill it gets to 350 then turns my truck off. Edge sells it for the EAS System

Yes I could try depending on how good the map is.

Well I have a picture of it but guess I can’t post a picture on here?? 🤷‍♂️

@michaelcole506 um yeah I guess you are correct. Do you go to Ray Rocks much? What is you're Rig??

@@ninjapat66 Oh, I don’t plan on going on that obstacle! We have been there once so far and I went down one of the trails to get to the Jeep Trail and we got trapped down there. I remember having to make an off camber left turn while going downhill, very close to a tree, and then down a couple of rocky steps . I ‘think’ it was the orange trail but I’m not sure. I posted a review on their FB page; I have the little green Wrangler TJ.

@michaelcole506 yeah I live an hour away I haven't been in a month I've gone through some sketchy stuff out there. But it's alot of fun & close to home for me & my buddies.

Yes sir so did we all, the more the merrier. Been fun doing more trails with you all that's for sure.

Yes sir, been even better if you all could have made it out.

Awesome! Great day for racing other than the humidity.

Yes it was!

Most definitely,I seen them the last time they were here at the Midland & they 🤘🤘🤘🤘

Thank you!👍

Yes sir it was.

Glad you did wish we could have stayed longer.

Yes sir we missed you 4 sure. Saturday Night was DEAD!

Yeah had a Great weekend only 1 rollover. Lol

Awesome did you put the Traxxas long travel lift kit on it also?

No brother just a longer shocks and a 2.2 super swampers tires and to be honest bro, it’s Ben good sr

I buy the 115 mm long shocks bro just in case you want to check it out and see how they look sr,

Well I've got the lift kit you're tires have to rub the body as my 2.2's do even with my lift.

You will be surprise brother the tires 🛞 don’t rub the plastic that much in happy so far

Sounds like you better start doing some trail cutting then. 300 acres would do in a pinch 500-6500 acres is even better IMO

@@ninjapat66 open invite... we trying to start a atv park.

@@KingSouthern900 hope you have good ins

@@ninjapat66 Can't I just put up signs. Play at your own risk. 😂 🤣

@@KingSouthern900 lmao yup you can good luck with that maybe 40yrs ago you could with a gentleman's hand shake. Not now CYA

That would have Great if you & the Guys were here 4 sure!Yeah we had a Great Time my Buddy said this is his favorite place to ride now,hands down! I've still got to clean my rig it's a muddy mess from the snow & Ice melting.

Thanks Bro Miss you heal up so we can do some riding! I have some work to do on my Rig. Lol Hope the family is doing well!!!

i have some more to download maybe a day or 2

I have some videos of them in the woods.

@@ninjapat66 oh I didn’t see them on your page

@@justinvess9667 Its all good Justin I have a few videos on my page. lol

Thanks 👍

Thank you I need to take my Rc trucks with me next time I go.

Thank you!

2.2 Pit bull Rock Beast II

5.75 ?

how many in millimeters do you know?

5.75 mounted

You should check out my other RC videos that I have on my channel

Thank you I appreciate it! I need to get back out on the trail & do some more video's

Thank you, they are s great looking wheel.Thanks I need to get back out on the trail & shoot some more video.

@@ninjapat66 can you tell me where you got the wheels?

@@royherrera6397 rpphobby.com they sell those wheels