Video

20 thousand dollars for this? No wonder why StRATasys is trying to ban Bambu Labs from the US market

Try to print 10pcs, then weigh them. :)

@mattarchitecture but theese are Heritage Building !? Why don't you just do Mixed-Used Architecture

I am concerned that unforseen things which were picked up in the hands on model making will be even more infrequently found using 3D printing. For instance, the muck from cutting and carving out in modeling the façade's curvy pattern won't be there in the 3D. Therefore the realisation by the architect from the modelling that in real life and at full scale, such dirt traps on a the face of a building in Soho are an unnecessary future maintenance cost and a bad idea needing more thought, such will be lost.

Printers are good but... For me the biggest : "No GO" is Cura Slicer. Cura is really the worst slicer in my experience. I never have a good time with it. Why they can't do what everyone else does: a fork of Prusa Slicer to finally offer a pleasant experience. Given the price of the machines, when the software does not keep up it is unacceptable. There I said it.

nice. but i think Ultimaker/ stratasys cheaped out on the Designer. Ultimakers S-series Printers are much more nice to look at than the Method ones.. They look like generic chinese design.

shaime poor kids are gonna waist their lives waiting for shitty cura to NOT SLICE ANYTHING , will ultimaker chime in before graduation because the slicer has not sliced for the last 3 years and theres no way to get through to these dimwits

how did these guys get anything done,cura cant even slice a cube

bu now this New News is a year old Aand after a few new updates i see that cura STILL DOES NOT SLICE JACK SHIT ????????????? Anyone know anything about this,why is cura updating something if it doesnt work only for it to still not work im litteraly only writing this as i wait forever for cura to probably Not slice this part today and its always been my go to for the older printer but it seems cura wants to leave the game cause theire not playing now nor have theu for the last 3-4years ?

i find it hard to believe a business would battle it out with a company whos slicer wont slice jack shit,or has ultimaker moved away from 3d printing because the slicer has not worked for about 3years now and i cant bother giving feedback to a company that doesnt give a shit

Dear Ultimaker Team, I recently found out that in the Sketch series, you use an EPA filter, which is not sufficient to remove VOCs and nanoparticles from 3D printing fumes. The Ultimaker S line only has a HEPA filter without carbon additives. It seems like the focus is more on profit, even though your machines are already expensive. Please, please prioritize safety by incorporating better safety tools to protect users. This is dangerous, especially for the new generation. Educate them about the risks before focusing on the technical aspects. And I don't know which material you show in the video, but these fumes are not parfum, tell them stay away😢

stop the lawsuit 😅 lol 🐼

I have to use the ultimaker 3 at work and i honestly can tell my anycubic vyper for 240€ i had and now my bambu lab a1 are much much better than that shit ultimaker. It's slow, it not accurate, it fucks up like 20-30% of the prints, you have so much work cleaning the mess. The worst thing with it is the glass plate. I HATE IT SO MUCH. Either nothing sticks to it, or it sticks so much you have to fight with the plate either breaking the glass or the part you printed on because its like super glued on. Today i came to work to find AGAIN my 15 hour print ruined. With normal printers with a metall plate your parts simple fall off when the plate cools down. With that glass plate if your print is finished over night and when the plate cools down 5mm from the bottom of your parts shrink and get like a vaccuum suck on that plate. So they can be only removed forcefully. You either break the parts or you rip off an edge or surface. I HATE THIS PRINTER SO MUCH. Glass plates suck and this printer is terrible bad and slow.

Its not hard to change the title to reflect the actual model (How to replace S-linea Nozzle covers)

افلام اجنبيه مترجمه

افلام اجنبيه مترجمه

How do I know which versions to keep and which one to drop ? I`m so confused. Ender 3 and Ender 3 Pro and a weedo.

Ultimaker put out the S5, then Bambu put out the X1 Carbon. Ultimaker put out the S7, and it's said their printers are for professionals, so Bambu Killed them with X1E. Ultimaker is all but dead.

How much will aprosthetic hand like that will cost me?

Czyli co Druk 3d to już nie inżynieria tylko artystyka :P

These guys need to discover SLA 3D printing. They can have both near perfect transparent parts completely watertight and down to 50micros (or even less) resolution with even a cheap Chinese consumer printer.

YAY ULTIMAKER FINALLY DISCOVERED DIRECT EXTRUSION AFTER MORE THAN 3 YEARS!!

the bike looks off the charts. I am in the 3d print field and have been looking for life size full size .stl or any 3d file to build a Harley Davidson or anything full size. I can't seem to find that im looking for, can you give me any suggestions. I am making a life size mandalorian but there is so much more I want to produce. thank you

Nais

Yea, we'll compete with that eventually. At a far lower price point, and much faster.

Pretty excited for the first minute until you showed the dual material part that has cross contamination everywhere (green bits on the black part). Also, the PEEK part with warped bottom is not so impressive with the price point of the machine.

Are women allowed to operate it?

19.5k buys a lot of X1C…. Now just ( not so patiently ) waiting on X1C XL 😁

I remember the good old days, when Ultimaker would advance technology with a huge community. Seemingly, managers have taken over seeking to maximize profit short term. 20k for this is ridiculous. Apparently, the development of this machine began before the advent of the X1C. And they decided to just steam ahead anyways. I work for two companies that rely heavily on 3D printing. One SME with a print farm, the other a large enterprise using Ultimakers in prototyping and production. Both have moved away form Ultimaker towards Bambulab with a year. The factor 4 confirm that decision.

This is going to be a game changer, and we're excited to be part of it.

$19,500 and it’s still missing features like auto x-offset? Insane. You’re not even hitting the targets that the X1C knockoffs are achieving at the $300 price point.

Idk maybe you guys should try cloning the Chinese when it comes to features

If there is no auto z offset I will never buy the machine. Seems to have failed in several other ways. Maybe time to clone the Chinese?

This is what happens when Stratasys meets Ultimaker. They create a rock solid machine with the best performance. But then they nerf it with proprietary hardware and software limits. It seems that they have just improved the old tech, instead of adapting new tech.

Yikes, another disappointing announcement from Ultimaker. The S7 was a repackaged S5 with an obnoxious price. This still lacks speed, lacks something as basic and proper as an active carbon filter. What exactly is 'industrial grade'? I am assuming heavy for the sake of being heavy makes it industrial? You can get 8 of the Bambu Lab's X1Es for the price of one of these (each that will print reliably at 4x the speed), and if the extra 20c is super necessary, or the slightly bigger build volume, there are tons of other options for half the price. I would be SHOCKED to see a 95% success rate since the S5 we have has been nothing but problems and rarely gets 2 successful prints in a row. Ultimaker has completely lost their way. After this announcement I have zero faith they are going to be worth while ever again. Too many other companies making actual progress and miles ahead.

So according to Ultimaker, the reasons you should all be spending $20,000 USD on this machine are as follows: 1) It prints correctly 95% of the time 2) It has lower accuracy (+/-0.2mm) than a Bambu X1 (+/- 0.1mm) 3) It has a direct drive extruder (like an Ender 3) 4) The software has a "new code base" (big selling point!!!!) 5) It has similar heated chamber (but smaller build area) than a Flashforge Creator 4 (but is twice the price). Why would anyone spend 20k USD on this piece of obsolete underspecced crap when you can get an Intamsys Funmat Pro or an Aon3D (both capable of printing ULTEM and PEEK0 for the same price (or less)?

ultimaker finally uses direct drive extruders on their printers, while still using proprietary 2,85mm filament.

I don't see your upgrade here in terms of your filter. What a pity that the new UltiMaker is an H13 without activated charcoal

is it my problem? I just tried to visit the Ultimaker website and it says that "undergoing scheduled maintenance"

still cant get as nice of a surface finish as a $250 bambu lab printer that printers twice as fast lol

20k!!! Are you guys smoking crack?

Ultimaker still putting out overpriced junk to scam schools and businesses I see

also me still waiting for ultimaker to use 1.75mm

i am still waiting for ultimaker to be better than bambu. I have a bambu lab p1s, and compared to my local library's s5, my printer makes the s5 look like shit

It's too little too late. Also change your scroll direction.

The next EVOlution from Ultimaker. 4 years ago this would have been a solid workhorse with state of the art tech. But today it seems like the UM developers took some kind of hiatus in the dev process. No input shaping, no core XY, exotic filament diameter, still the old low flow print cores, no automatic flow calibration, still manual printcore offset calibration. Good luck!

Taken the day to think about this, im honestly wondering who Ultimaker is trying to compete with. I've heard comparisons tk Bambu, MF and Stratsys...different customer bases. Can't compete on price point or even features with Bambu. Can't compete on reliability with engineering materials with MF/co-fiber extrusion...

i miss the ultimaker robot as a logo ... -_-

I can't think any tangible reason why I'd recommend to anyone, nor invest thousands in another Ultimaker printer, if after only two years from new, my Ultimaker S3 is essentially obsolete, it refuses to connect to the digital factory and to rub salt into open wounds, Ultimaker refuse to supply materials, print heads and accessories outside the US and Canada. Which makes one wonder, how long it will be before the S5 becomes obsolete too, now they've introduced this latest Factor 4 iteration. 🤔

Get 15 X1 Carbons instead