Video

Where I can buy that mirrow?

nice instructional demonstration

Does anyone know where I can buy them?

This is the best procedure and film I have seen! Very clear.

Good video very helpful

Just give it a loving BONK😂

My 97 door panel doesn't look like that one

Slam it on there lol 😂

Is there an option for an 2008 xlt model that has power mirror but no power folding or telescope

What about the passenger side

Congratulations, you no longer have power mirrors 😕

Really good video - Clear and concise! I particularly like the tip of adding some sticky to the socket so the nut doesn't fall down the trim! My sockets are magnetic and that still doesn't always prevent loss. The bad parts - Mirrors for my 2013 Expedition included "additional" wiring coupling (extensions?) that is not in the video nor explained in the flimsy included pin insertion guide that was in only one of the two mirror boxes - PLEASE put these instructions in both boxes, Murphy's Law guarantees that a new buyer will always open and install the mirror that doesn't have these instructions first! C'mon; it can't be more than an additional 2-cents to put an instruction sheet in both boxes... Anyway, I thought that this extra wiring was for fitment in another model vehicle, after all, the Green/Purple & Black/White wires are not already inserted because they need to go into different vacant inserts depending on vehicle make and model; right? I installed the mirrors without using these extra wire extensions; when testing the new mirror motor operation, they adjusted up and down but not left and right. After taking off the door panel again, I added these never addressed extensions and then the mirrors did adjusted in all directions. Hey Trail Ridge! Your Flimsy instructions need to include not only the stuff I mention above, but how about adding a QR code for this video because there are several CZcamsrs that address this installation and they are not you (or nearly as good) AND... You claim to Warranty your product(s) but HOW DO YOU WARRANTY YOUR PRODUCT? There is NO product registration on your website, you do NOT furnish a phone number, email address, or offer any way to contact your company/customer service that I could find. After 30-days Amazon won't connect to product support. So how does your customers get assistance or warranty service?

Mentioning the sizes of the sockets needed would be helpful. Edit to add: I neglected to mention that the video was great. Thank you.

Be advised, these mirrors will only fit the Crew Cab 10th Gen F150/Expedition body type. Regular cab or extended cab bodies won’t fit

Could you please help me with finding these parts. I’m in BC Canada and I cannot find these parts.

What does it look like when you are done?

Under the hood you show which fuse to hook into with the "pigtail" for the red wires, what about the other wires, which fuse do they pigtail into? And also, what do they control?

My mirror doesn’t unfold all the way. They’ve been on for 2 weeks. How can I fix that?

Just watched this video and replaced my broken mirror unit on our 2013 Suburban in a little over an hour. Great video, thanks.

Did you leave TRQ?

Website says 2001-2003 F-150, but here you say 97-03, which one is it? Trying to buy for my 98

Thank you for the DIY video! I just watched it and did this, but I sped up the job by not removing the door panels and tying a piece of string to the mirrors electrical lead, removing the mirror, swapping the string to the new unit, then fishing it back through. Considerable time saver!

Do you have any videos on how to replace the trim around the driver window and the rear window trim on a crew cab ford f350

Thanks for the great video

Great video 😅

Great video. I'm going to install these mirrors on my son's truck. Thank you!

Excellent video!

Really helpful!, just had my old one destroyed.

Do you guys have PPF vinyl film to protect the mirror lenses? Would be a great addition to protect these mirrors

Do you guys know what wire to tap into for that? I have both the running and turn?

I noticed that there are "tow mirror support brackets available" if the factory mirros where not tow/extendable style. Do I need those additional support brackets to instal tow/extendable aftermarket mirros? Or can I get by without them? Thanks in advance

THANK YOU . . . for taking the time to do this video!

lol that was not installed but nice video on how to remove it.

We're I can get it?

Tapped into those wires... no running lights, turn signals work great, and they also come on when brake pedal is pressed... Think you may have found the wires for rear!

Not doing TRQ videos anymore?

I don't know how all these guys can work with gloves on. they always get caught in everything if I wear them.

Check and make sure you didn’t pinch them during the install and damage the wires

Ripped my old mirror off by accident, bought some of these upgraded tow mirrors, very helpful videw🤙

You can pop these off by removing the glass and un-unscrewing the four T20 torx screws aswell if you don't want to break your stock ones.

Those lights brand pleas

Gracias 💪

You were helpful but my 2013 Silverado has the lower door handle and additional bolts for the pull handle

Thanks for the video. Followed your process step by step and it went perfectly. Thanks you!

This is an excellent tutorial on how to replace the Xterra outside mirror. The freezing weather broke the electrics inside, so I bought a new one to replace it costing less than $50. I believe I could have replaced just the motor, but it's the same amount of work if not more, so I went with the complete assembly.

Are these mirrors power fold?

How many different sites do you do automotive videos for? I’ve seen you on 1A Auto and TRQ… They might not show your face but everyone knows your voice and your cue ball LOL

Where you find the clips

The Width of the Heat Deflector Plate Covers/ Blocks.... The Two - Corner Bolt holes...How did You Manage to get the Two Corner Bolts in Place...? Did You Drill thru the Heat Deflector Plate...2 places...in order to slip the Bolts thru, at the Corners...of the Plates..? Also it Would Have Been Nice to See the Airbags Lift the Truck Bed , at the End of the Video... Would Have been Nice to see the Raising Range Height - increase ...in inches... I understand these type of Bags have a Maximum 150 Lbs. Air Pressure.... I am Currently Installing this Kit ( or Identical to it ) on My1999 Chevy Silverado. I found an immediate Problem with the Kit , trying to mount the First Plate ( A) to the ( Top) Frame... The center Bolt hole and the Bolt hole to the Rear, of The 3, Matched Nicely....But The Forward Bolt Hole Did Not Match Up...!! I will Have To Drill thru the Frame to be able to install the 3/8" Bolt...!! Or I can Arc Weld thefront of the Plate...to the Frame ..this was A Complication....that I did Not Expect...on a " No Drill Air Bag Kit...!! It just Causes a Time Delay...and More UNEXPECTED - Work... BUYERS BEWARE...!! I am Installing New Shock Absorbers ( Rancho ) Also. BillinL.A. 01/15/2024

🤞🏽