Video

You do know there is a little knob inside the housing you can turn to have the emblem face there right way when the door is open

It's a good idea to clean a MAF sensor at the same time with CRC Sensor Kleen.

Mở cai mieng nhựa phia trước thay cho de

Thank you for your video, I did the job not this particular job but same procedure and because of you , I did the job with ease, and I am not a mechanic at all! Thank you very much.

This guy!! Didn’t show how to replace. Seriously?

Thank you!

Anyone knows how to stop the alarm " check surroundings "? it's very annoying

Спасибо.

Completely wrong procedure! You don't even have to dismantle the hand compartment ... how stupid can you be?😂😂

Ain't nothin' "perfect" about THAT fit!😎

Very helpful and simple to understand video. Thank you!

great video! Struggling with that one back bolt for the manifold. Yes, the one you didn't have to remove, lol

What about the other filter underneath the black air box???

Thank you 👍

We need so send some money for the Indonesian who help us there.

Years ?

Thanks for making this helpful video

Same on 2007 rx400h?

awesome glasses, i have a similar pair - those don't even touch your nose

Perfect000000 👍

Your kid is crying.

For the 2011 Corolla, there is an inexpensive workaround. I bought a quality brand 1/4 in torque wrench. It generally "clicks when it's supposed to but I was so paranoid after cracking my first filter housing I arrived at a simple workaround that gives me the desired torque, without overtightening. I also do not require a torque wrench. First ... when removing the housing, as gently as possible, unscrew the housing. Do not yank, grab, jerk or wrestle the housing off. Gently, gently unscrew the cap until finger loose. Remove normally after that. When tightening, gently tighten the cap towards the housing (base) surface. Just before you've tightened it fully, ensure you can insert a 0.15mm feeler gauge between the cap and the base. If you have a snug (not tight) fit. You're good to go. But I repeat, gently, gently tighten the housing down to that gap. More and you risk cracking the housing a few months later when you change your filter. Generally that is when the caps crack. This has worked without issue for two full oil changes without leaking and the housing was easy to twist off without an initial jerk or tug to loosen. It just immediately began to twist out as soon as I put the faintest pressure on it. That's it. Guaranteed "decent" accuracy of torque without overtightening and without a torque wrench. Best of days to all.

What size is the light bulb

What size light bulb

Thanks for making this helpful video 👍🏻

Same as mine

Hi kenny, i have the same problem..did it work when u change the valve? Thank u!

How long till these head light go bad too or are these different

Thank you! Very helpful.

After changing the sensor i continue to get a high temp alert and AC is turned off. Also the temp control keeps getting up. Did this actually solve your problem?

Thanks!

Thank you for this!

Thank You!

Thanks for this video! Helped me get to my #1 coil!

The video was 6 years ago and its 2024 now , my freind' where did you Buy those rubber you replaced in yourRoll Rod ?

Extremely Helpful and important to note and I didn't hear it in the video all I heard was 30mm axle socket but it is a 12 point socket not 6. I had 6 points from removing the chevy wheel bearings already that I was ready for just jump in and go but no lol and you'll need both rear tires jacked off ground enough to spin the wheels to match the holes up to get the bolts off

So what was the issue after all, if this didn't fix it?\

Thanks for the video!!

CO NOI DUOC VIETNAMESE KO

Thank You!, Great instructional video!!!

Good job 👍

great

BAO NHIEU KM THI THAY BOUGIE

CHO EM TRAI 10DIEM LAM CHI 1TAY CON 1TAY QUAY VIDEO GOOD JOB

hi dit you now what is the max of storage to buy

Have you fix it yet

Thank you so much for sharing all this information with us ………………

What size of 2 bolts did you use to remove brake disc ? Thanks

what year is that veloster

I did the spar plugs and ignition coil in my 2007 RX 2007 I did the 3 rear ones with one hand is easy to reach, so you do not need to take the engine apart.