Video

This is the most comprehensive video on CZcams! Very clear! Thank you Sir

I couldn't understand his name was it Don Nurley? Also has he by chance owned/reloaded for ruger no1s? An incredibly informative and well done video thank you

That is a great in depth video on reloading. Thank you for sharing.

Great video. I have been reloading for 4 years now. I am thirsty for knowledge. And I did learn a cool trick with the lighter. Thanks

Can i use dishsoap liquid or soap

(Revelation 20:11-15)And I saw a great white throne, and him that sat on it, from whose face the earth and the heaven fled away; and there was found no place for them. And I saw the dead, small and great, stand before God; and the books were opened: and another book was opened, which is the book of life: and the dead were judged out of those things which were written in the books, according to their works. And the sea gave up the dead which were in it; and death and hell delivered up the dead which were in them: and they were judged every man according to their works. And death and hell were cast into the lake of fire. This is the second death. And whosoever was not found written in the book of life was cast into the lake of fire. (Revelation 20:11-15)

❤❤❤❤❤

Get your geography correct -- please. Zortman is located in the Little Rocky Mountains. The Bearpaw Mountains are West of the Little Rockies!

Getting started into reloading. Glad I found his video. Thank you for sharing

Thank you for this video,. I have a Hot springs flare also and this really helped

Jesus didn't need to go to Egypt to learn healing his father is a healer so did Elijah heal in the book of Kings he didn't learn chi-gong

LOST ALL RESPECT FROM THE MOMENT HE USED THE WORD ALIEN INSTEAD OF THE WORD EXTRATERRESTRIAL IF YOU DO NOT HAVE A BASIC UNDERSTANDING OF ETYMOLOGY YOU DO NOT HAVE IT AT ALL WITH YOUR SO-CALLED "RESEARCH" a·li·en adjective belonging to a foreign country or nation. ex·tra·ter·res·tri·al adjective of or from outside the earth or its atmosphere. IF YOU CAN'T GET THIS VERY BASIC INFORMATION YOU OBVIOUSLY DON'T KNOW WHAT YOU'RE TALKING ABOUT PATRICK I RECOMMEND THAT IF PEOPLE ARE UNABLE TO GET BASIC LANGUAGE AND LINGUISTICS RIGHT THEN YOU SHOULDN'T BE ENTERTAINING THESE CHARLATANS THANK YOU SIR

The cave at 21:10 is called Teton Jackson cave. Excavations there in 1941 were started because of the rich deposits discovered in Pictograph Caves, but only a relatively small handful of artifacts were found.

I'm planning a cross country trip to this area. Amazing scenery. Is there a trail head for parking or camping? Any info appreciated

Jesus is the cornerstone the builders (Masons) rejected

Freemasonry was founded in the 1700s Jesus predated that by awhile Furthermore Jesus is the living God he didn’t need anything he came down to earth because he was so loving of us that’s it not any of the lies this man tells Look into his eyes there is no life there Jesus tells us to beware of false prophets they are like ravenous wolves If you let this man guide you you will go to hell let Jesus be your teacher no one comes to the father except through him

I feel like u have a lot of knowledge and I hope I can find more information on what ur saying and so far so good!! Keep them coming!!

This is perfect. I have 5 extra K&N air filter oil cans as I use the air filter cleaner spray faster than the oil.

Very disappointing video. It could have been interesting to learn more about the history of the area, but why you posted the video with such horrible audio (wind) is beyond me. You could have dubbed the narrative to make it worthwhile.

Christianity and Freemasonry do, in fact, intertwine with each other, because he was considered a carpenter. Let's just consider the fact that, in the New Testament, Christ laid rock as the foundation of the temple, and, plus, this rock that was laid as the foundation of the temple is allegorically synonymous with the Philosopher's Stone that can be used for conscious purification. Allegorically speaking, Jesus was consciously the embodiment of what masonry is, if we are going to take the truth about masonry for what it is. MASON=A skilled worker (ex. a carpenter) who builds by laying units of substantial material (such as stone or brick)

I want more people in this comment section with more knowledge on this. Seems like a false prophet but hes very convincing

Are you able to access Careless Creek from the main road or is it still blocked off? Have to cut over from Swimming Woman?

That’s wrong “After Herod died, an angel of the Lord appeared in a dream to Joseph in Egypt and said, “Get up, take the child and his mother and go to the land of Israel, for those who were trying to take the child’s life are dead.”” ‭‭Matthew‬ ‭2‬:‭19‬-‭20‬ ‭

Do you paddle downriver to a vehicle? Or is the flow light enough to paddle back upriver once you're done?

Thanks for sharing, a true masterclass in passing on years of knowledge in the most thoughtful, explanatory way I’ve ever seen. Reminds me of my late father teaching me to tie trout flies, he was a master and I sadly never really realised that until he was gone.

Thank you for uploading your father's video. Excellent instructor!

That was a fantastic video. This is the kind of content I’m looking for. Direct. Detailed. Huge respect to your dad for making this video. Thank you for the upload

Just wondering if you have any tips for me for my browning BAR 300 win mag. I’m having a hell of a time getting proper sizing and seating depth. It seems to have a smaller chamber. Thanks.

I am curious if your dad would be willing to help teach me if I give him some money for his time? I live in Bozeman but my girlfriend is in Billings so I am there quite a bit. I recently purchased all of the stuff to reload but am struggling to find a mentor here that can help me feel confident I won’t mess my rifles up

From Russia with love. I really have to point out your working place. That speaks for your level of dedication and professionalism.

The knowledge that your father has provided gave me the confidence to go out and buy a good reloading equipment to do it myself. I will continue to watch this video until it clicks. I'm forever grateful!

I’m a pretty experienced reloader, and still picked up some good info and tips here. Thank you to your Dad for putting this together. I’ve made the mistake about not labeling what was in my powder measure, and learned my lesson. Nice tip on setting up the balance beam scale. I also have that excellent older RCBS 88507 APS hand primer and all the strips and strip loader, and of course RCBS discontinued it! They went with the tray one I don’t care for, so I’ve been trying to find a replacement as that’s a great model. I full length resize every time, even brass in the same rifle, but just enough to set the shoulder back .002” in a bolt and .003” in an autoloader. I understand neck sizing, but every few reloadings you’re going to have to FL size anyway, so I do it every time for consistency. Your reloading bench is perfectly organized! Love those die and bushing racks. Ironically, I was reloading pistol ammo on a Dillon progressive for 20 years, but I think I never really _learned_ reloading until I started reloading for a rifle on a single stage press. The best tip I learned from your video, and frankly can’t believe I didn’t do this before, is to have the bullet reloading manual side by side with the powder manual, as of course the powder manual will list all bullet manufacturers, so it’s a good comparison. I appreciate you taking the time to out together this comprehensive video. 👍

thank you very much for providing this video. your father is a very good teacher, if possible continue uploading his teachings we are learning a lot than you can ever imagine. your father is a Gift to us

Nice.

Do you have a trespass permit ? Pryor gap rd is on reservation land. Nice but still not like doing it over a lifespan on foot 😘 Drone does it in one sweep but still, what a view to look at !

Again. Nicely done. I still yet to copy your plumbing art. I will be building a cart similar to yours. I do recirculate on my Herms to keep a steady temp. I don't have an insulated tun. Crazy request. Could you make a video on just the brewing cart?.. And links for parts.. Link for those 3 way valves. I know too much to ask.😊 Cheers from Phoenix, AZ. 🍻

How far as the hike up tovthe vision quest top area?

Very cool!

Thank you for sharing this

Nice looking setup man! Love it. Thanks for sharing! I see you have a good brew assistant ;-) Cheers

👎👎👎I I'm learning more and more about Freemasonry and I do not believe it is a good thing.

I’ve reloaded pistol and thought so long about rifle for hunting purposes. I’ve watched so many videos and I’m so impressed by your efforts at explaining different aspects. I have one ’deer rifle’ so save the once fitted brass. Finally someone who explains the difference between once fitted and range brass and resizing! My first question is regarding the flash hole. Some have said it’s important to deburr the inner flash hole edges with a tool but you didn’t. Do you not find that necessary? Second. The neck resisting die you use didn’t make any reference to how much smaller the ball should be in relation to the projectile. I’ve seen it said that possibly 2 thou? Is that being too anal? I was hanging on till the end to see your opinions on crimping but your video reshowed earlier clips. What happened there and did you make another video on crimping? Overall I was delighted with your efforts but crimping has always been a vague spot in reloading rifle ammunition and yours skipped that aspect. Many thanks for the rest it was genuinely informative and easy to understand. Some other videos have my head swimming with high brown technical stuff. Kind regards Ed

Very Nice video describing everything! With your ability to fill MT from the bottom would you try adding grains first and then the water?

Incredible video with amazing information

Thank you for explaining the plumbing. I also have a 3 vessel Propane Herms. .I've been waiting for this video for a while. Thx. Cheers from Phoenix, AZ.

I got a funny story about when my dad got a reloading bench and decided to wing it through loading. Also him and my mom babysat this awful kid who's mom lived in the area and they convinced themselves that it was my kid so they could have grandkids. It's not my kid. This kid would sneak into his workshop and play with tools including the reloader handles and one day the scales were left out to be seen by him and he played with those too. I hunt with a rem. 300 ultra mag and bought the set of dies to reload ammo, and a couple bags of brass, powder, primers, bullets and a couple boxes of factory ammo with the intent of getting my neighbor Jerry to show me the steps to reloading in the future. I get a better scope a couple years later and decide to re-zero it and stop by my dads house where I keep my guns and ammo in the big safe. I grab the last 2 boxes on a shelf of the ultra mag's ammo and call Jerry to meet me at range. I load the gun after bore sighting and place the gun in a large sandbag with a secondary smaller sandbag under shoulder stock so its nice and stable. This thing accelerates 180 grain slugs to 3300 fps or beyond so the recoil is massive. I load the first round and fire and the recoil was brutal. More than I ever remember it being but I think I'm just getting soft. I load second round and fire and the recoil was just damned brutal but Jerry is watching me from the side and stops me and wants to see a spent brass. I handed him one and he said stop and take out the remaining bullets. He calls my dad and asked him if he had reloaded some of my bullets and he said yeah, both boxes had been reloaded. Jerry told me there was a huge ball of fire coming out of my barrel and the spent rounds had pushed out their primers. We get to the house and go to the reloader and dad is showing Jerry how he reloaded everything and the weights of powder per round when I noticed the little cup that you weigh the powder in was missing that little brass handle you hold it by. That was what his analog scales weighed up along with powder and although that tab was small in brass weight, it was a lot more in powder weight. He pulled the slug out of the bullets he had loaded already and the slugs were setting on the powder in the brass....I was about to blow my gun up. Moral of the story.. now I'm about to start reloading for myself and I am watching everything I can on how to do it right!

This is Rosetta Stone level work. For all the amazing tools we have now, if you don't have a mastery of the subjects your dad addressed here, you'll never maximize the benefit of all the new stuff.

He’s right.

That white car needs to finish its stripe job