Video

Looks good; thank you

if slope of the roof on the wall then what solution is ... pls

These are the best people over there at 1st Coast Metal Roof supply !!!

There are 2 ends that need to be finished. Come on.

Thanks for a good video

Thank god for metal roofing ... lol and vidio tutorials too🙂🙃🙂

My 30 year asphalt roof I installed and know all the flaws .. never failed on the flaws but the shingles shrank dont past the nail line in 20 years.. a contractor wanted 34grand to do what me and my friends did in 3 days .. 20 years ago lol.. we replaced every piece of plywood . That job didn't last 20 years.. last year I replaced a metal roof that had only minor leaks arround chimney in Florida weather that roof was over 80 years old .. I was proud to replace that roof with metal .. I'm not going to live till I'm eighty but I can try and watch this new roof age .. I know it will last more than 20.. and if it dont it's easy to replace and a tenth of the cost if that .. and hug this a little while.. its recyclable down to the screws

I'm beginning to realize that really the seal is to keep wind blown rained snow from topping the vally walls. As long as your valleys dont dam up with debree gravity is on your side water shoots down these valleys like its rocked propelled so unlike asphalt roofing where the water soaks in and slowly seeps it's way down you dont have a back flow problem .. but if you do the seal is for that.. go up and look up that vally when its pouring rain .. you'll maybe get a new prospective of how metal roof sheds water like duck

This does not show how to fully install the valleys. There is no detail re: the top.. where leaks are most likely.

FO WITH YOUR MUSIC !

How does one prepare these ridge vents to keep out bugs, rodents and bats?

I love your video thank you for putting this type videos up

Hello. I'm working on an octagonal corrugated metal roof. Not sure how to cut & join the 8 hips together at the peak. Any advice?

What about the peak

You put it on top of the screws? ROFLMAO.. its an animation, you can do anything you want, and you still put it on top of the screws!

so does the housewrap go over the trim? should I maybe like add some window tape before I put on the vinyl siding?

What is price of metal

Please have some videos on raised seam roof installation

HAHAHA ROFL HEHE well just as soon as i wrote the 1st message the video actually came into focus so i could read it!!! LOL nevermind.....hahaha

guys its a very helpful video ut i can read the popups during the video ,concerning what the materials are called? at 0:34 it says to apply "something" to the top of the closure ,unless it has an adhered backing already on the closure. I got that part ,other then what material to use in the calkgun? Is it regular silicone or some product that is specifically made for metal roofing? All of the pop ups are so blurry i cant read most of then ,even with my cheaters on?!! LOL thanks guys good stuff though

With the side flashing and the endwall flashing on top of it, what is the required height allowance to install this roof system either from the top of the ribs or from whatever deck system is used whether purlin or osb? The flashing height requirements is what I cannot find. I have a VERY tight fit with a porch roof design under transom windows and need to know what I can work with. This would be a traditional finish (no counterflash or reglet), so I just care what happens with the height requirements on the endwall to do the flashing.

Why exactly do you need the tape if you’re putting it over a roof that already has metal panels on it? It’s like hey we need to make that part water tight because that part of the metals not as good as the other

What color is this please?

How do you trim a rake that angles up to the ridge? Meaning the ridge is longer than the eaves below, so when the trim is applied the butyl tape can not be applied because the peaks and valleys of the metal roofing panels are leaving 3/4" gaps between the rake trim and the valley of the roofing panel itself.

It's great to know we are doing business with the Best of the Best. Thank you, 1st Coast Metal Roofing Supply, for all your help.

Si pero el maderaje que tiene cruzado por dentro eh los grande eso es los que no se como van ha entrale ha eso

What is this type of metal roof called? Residential rib?

This is amateur work. No close at the bottom of the valley to prevent insects and actually look professional and clean, and the top is a guaranteed leak.

video would be awesome if the first measurement was clarified a bit. As well as finishing at ridge.

Can we get it in India

What kind of sealant do you recommend to put om top of the gaskets?

Do you have a video of a transition from a shingle roof into a metal roof? I am building a covered deck with metal roofing and the house is shingled.

Excellent!

Thanks for sharing

Yup, same system on my house and every time it rains hard, it leaks.

Call me sir 9803200527

Best walk through out there

Is that a regular valley?

says to use panhead screws, but shows the use of flathead, countersink screws.

Cand

Good work thanks many

You guys have to show how the other side ties in at the top.

What do you put on after that piece to cover that exposed wood

Excellent

Very good

I've found all these videos show how to do the simple job of doing the valley but none of them show how to cap off the valley peak. I assume they just use a lot of silicone and the valley peaks are good for a few years and start leaking

That’s what I was looking for!!?

Huge leak at the top of this valley.

Cool!!

foam, rubber and sealant only lasts a short time, very temporary