Video

1k I'd let it go for

Samsung s10 and go pro hero 8 Black bro, its In the edits 😏

Ebay or some one who breaks subarus, are you uk based?

Thank you 🙂

Yes they were the same, best to order from your nearest car parts dealer

@@YKRECREATION thanks bro ❤️

No worries hope it gets sorted 👍🏼

Hello matey. I'd try IAC before changing injectors that causes revs to fluctuate, also 02 sensor can cause that. Does it drive fine ?

@@YKRECREATION yeah it drives fine now I got a code a couple months ago for a faulty maf sensor that caused it to stall on its own if idled or stopping at a redlight. I was guessing the 02 sensors but I’ll try this out and if it isn’t this or the fuel injectors then I’ll replace those aswell.

@@YKRECREATION it drives fine but when I’m driving you can really feel the power get drained from it as the rpm’s drop and rise.Kind of jerky.

Ok keep us posted

@@YKRECREATION cleaned up the throttle body but wasn’t able to reach the iac without stripping the bolts so wasn’t able to. Throttle body didn’t help much but engine is running healthier,when I shut the car off it doesn’t shake as much before

They are both the same on this vehicle, go to your nearest car parts store they will have all the information you need

Thanks

Thanks bro it's like that as soon as it hits even small amounts of boost

Thank you

Thanks

It was just some random back road towards Blackburn I think

Waiting for you to buy me a clutch 😅

@@YKRECREATION soon 💪

Let's go

Thanks bro, yh now that you mentioned it , I need to start watching his videos again, when I get a chance, that guy can drive !!!

Thank you, did it make you feel like you was in car ?

Thank you

Sounds like camshaft sensor not this

Nice, where are you from buddy

It's pretty simple, you can't really put the camera any closer as pipes In the way,

Similiar process to the first sensor, like the man said.

Thank you

Snakes pass Manchester

What car was you in

Your welcome ✌🏼🙂

I'd check for cracks and if its the rust has actually ate the spring, on this the powder coat come off causing them to rust, they need anodising to bring them back to life

You're welcome, did you manage to fix it ?

Under the inlet manifold in middle of engine, you should see it, got a single wire plug going to it

Also on the code list it mention knock sensor or circuit under 22. What is circuit? Where is it located? Thanks

Circuit is your wiring to the sensor

Since changed the knock sensor, reset it by connecting black & green plugs and following your instructions. After that was done reconnected the black plug to run the codes and still showing as knock sensor. Any help/advice please

You mentioned its showing circuit so you need to get your wiring checked, maybe drive it steady with both plugs connected then do the reset on the video

Yes I've heard good things, apparently they teach you entrance exit speeds etc

This is a Vw golf mk5 1.9 tdi

@@YKRECREATION OK thank you

No worries let us know how you get on

Yh thats it

Nice how long have you owned it for ?

@@YKRECREATION had it 3 half years spent loads on it when I first got it turned it off took key out and it was still running didn’t know it had a timer on it to cool down I drive it as a daily so it under sealed and inside boot on the arches too it never bubbles again 😂

What underseal did you use ? Done you good

@@YKRECREATION hammerite underbody seal and wax got it off eBay really good stuff it’s thick as well

was it the spray stuff or paint brush ? some say its best to leave them untreated unless you remove all the old rust properly either with a wire well or remove rust before spraying

Thanks mate, yh did not like the all wheel break system, less control, prefer the back brake and front brake separately, you got a polaris predator?

​@@YKRECREATIONno it's quadzilla xlc 500 I have bro

Yh similar setup run same engines aswell with a few different components, the frame is also different

Thanks bro

Thanks man, we struggled, couldn't find anything on ebay, or even quadzilla them selves didn't have any so we ended up selling it off, they've stopped making parts for this model now. What is it you need

@@YKRECREATION hi mate cheers for reply I'm after back brake caliper with handbrake mechanism can't get my one to bleed

Whats your bleeding process ? You tried reverse bleed some times that works

Glad to have you on board 👍🏼, I wouldn't mess with trying to hot wire it, if you accidentally join the wrong wires you could blow your cdi and all sorts Costing you more in the long run, I know you've just bought and probably can't wait to hear it fire up but I'd wait till your new key barrell comes, I've learned the hard way patience is key 📈

Hello buddy, for your car I'd suggest going to your nearest car part store and asking them if both sensors are the same, they was on this particular model, just to be on the safe side, best to change both then it rules out both sensors causing trouble later

What code did you get ?

Thanks for clearing that, i had a few mix reviews online, Im presuming you build engines ? what are the other factors that the bug eye jdm has over the uk

@@YKRECREATION No worries….i don’t build engines sorry just a previous owner of a non widetrack uk blobeye sti and remember having this discussion on scoobynet. I’m pretty sure the bug sti engine was the best but I maybe wrong. The jdm engine has bigger ports and came with a roller bearing turbo, hotter cams, 8k redline…..just to name a few….all the information is on scoobynet 👍

Thanks for the Info i enjoy learning more about them, are you getting another anytime soon ? forums are good but sometimes some false information on there you have to sit for hours and have a good read of different threads

Best of luck

Thanks a lot

have i convinced you to get one yet ? yh they sound really good

@@YKRECREATION got married recently so extra cars can wait for now

Yh man congrats 👏🏻 you'll be back in a car soon enough

Glad it helped

Glad you liked it!! on going project lol

Nice !! The one under the cover needs your hands on it 😅

Nice 👌🏼 did you convert to new age ?

And thank you

its probably testing the sensor, did you connect both black and green ?

was good fun, i feel like i need a 4x4 quad for trails etc or maybe a cheap bike, back pack on, sandwiches inside and explore