Video

Hello , I’m an employee at ComXim. We watched the introduction video you made about our product two years ago and it was fantastic. We are very interested in collaborating with you and hope to have the opportunity to work together. If you see this message, please reply.

Very helpful comparison. Thanks! Leaning towards Ferret Pro now.

I bought that machine. Don’t you feel like the water coming out of it tastes a lot like plastic?

Bedankt voor deze video :-) I am looking at the updated arduino/DFMoco sketch, version 2.1. The pinouts gives me only two per channel, what gives.... the controller needs four pins? channel 1 PIN 4 step. PIN 5 direction channel 2 PIN 6 step, PIN 7 direction channel 3 PIN 8 step, PIN 9 direction channel 4 PIN 10 step, PIN 11 direction channel 5 PIN 28 step, PIN 29 direction channel 6 PIN 30 step, PIN 31 direction channel 7 PIN 32 step, PIN 33 direction channel 8 PIN 34 step, PIN 35 direction

Eres mi Nuevo Héroe Personal Mil gracias, exelente video👌😋

I just got into special coffees ...I´m still building my 1st espresso setup and Im already thinking about another hobby. This is so cool. Did you add any other thing to you 3d printed coffee station?! Cheers from Rio de Janeiro,,Brazil

Great review! I have the same turntable. Is it possible to connect to the turntable with Windows PC using bluetooth connection without the need to use the USB cable? I tried but I cannot connect using Windows PC.

14:05 The Final Solution lol

no filter can keep up, smoke must out, ever seen a korean grill where every table has a grill and thus have its own flexible pipe sucking in the smoke? thats what you need, or a small canopy above your seat with a regular pipe and vent sucking in smoke and shooting it out, out of tent out of garage, not even buildings may handle rigorous smoking let alone a filter..

I am looking into these.

Thank you Steve! so helpful

No mejusto

Cheers, I have a similar Casabrews variant and it is a great beginner machine, I have bought similar upgrades too and looking forward to the upgrade portafilter arriving, thanks for a nice relaxing overview… sub

but if the table moves and rotates doesnt that mess up the lighting of a shot? But otherwise very cool setup

Rabbit Air A3 would of been one and done for ya and it’s very portable that can use it anywhere and inside your house too

Downside. Heat loss in the winter.

1 year on, are you still happy with the T818 ? Thanks

you deserve a subscibe and like, thanks for your videos...

Couldn't get this to print on bambu labs x1c .4 nozzle would not work set at 220c kept saying nozzle was clogged or broken filament, 2 hours later of messing with it still no go.

All those money for all those 'cracks' on background ? what's the cause of this cracking noise ? the rim wheel ? i had almost all thrumaster products and honestly i think they are almost toys compared nowadays to moza and fanatec.

I built a much simpler motion controller retrofit for my slider. You can substantially increase the performance of your system by replacing the (garbage) A4988 drivers with some TMC2209 from Big Tree Tech. They are pin compatible with the A4988 and will be a simple drop-in replacement. Set them up for 16 microsteps and they will perform further microstepping internally to produce amazingly smooth and near silent operation as compared to the A4988's. It will be the best $27 (for five) you've ever spent!

When you set your custom amount is it set for the double or single shot? Like later i want my custom size does it only work for the setting i made previously if I use 1 or 2? Great video though. It helped a lot!

Thank you! I ended up getting the ferret pro.

Awesome video, thank you. What power supply are you using? I've been using Emotimo TB3's for my time lapse stuff but want to build my own solutions now!

i need the file for the clip for your chair that u made for your vr cable plz

Are u sharing files for this

Explained very well. I got the Revopoint Range 2 scanner and practiced on many objects. Your video is very good to learn the basic setup and features for scanning the objects.

what is the plastic attachment on your scanner ? 02:37 ?

Steve very cool set up like that aluminum stand. What did you think about extreme wobble wheel flex. I'm 69 yo How do your arms not get tired it looks like wheel is above your head maybe camera angle

Thank you for your video and your help. I'm about to buy an other steering wheel because I lack information on cornering grip to be fast, with my current equipment. Your observation about the possibility of improving acceleration thanks to direct drive helps me a lot. THANKS !

Hi! Do you think is worth it to upgrade from a T300 to a TGT II ( basically same motor as the TS-WX) Thank you

I am just starting with stopmotion and have Dragonframe (I didn't bother with the trial as I guessed I will use it anyway :) ). I like your stopmotion rig and I will do something like it. But I will start with figuring out all the other stuff before I start with that. I have a ton of electronics everything from a heap of raspberry pi's, Arduino, esp32, stepper motors, small screens, big screens, cameras and a lot of other stuff.

Check out the ADC Accutrac 4000.

This is really interesting experiment, and it's cool to see how result changing depends on setup Thank you!

Excellent job -and greetings from Michigan. I was hoping to build a smoking room in our house, we have 31 rooms, so it’s a large place. The air handlers unfortunately will spread any residual smoke. I tried a room in the basement (with 6 hepa filters), but no power venting. Didn’t really work. So I’m looking at the garage as it’s heated by a boiler system. I really like what you did with the venting. Prior to this I’ve been going out to the screened in porch with a heated winter suit and a UV heat lamp. That’s fine, but I feel like an astronaut 🧑‍🚀 with a cigar. I think the vented smoking tent as you have it set up is a grand idea !

I went from a tmx to the ts PC racer.. and I WAS NOT IMPRESSED. at this point I think I would want something like 15nm of torque to actually enjoy the force feedback. Don't get me wrong.. it was a good improvement.. just not "night and day" like some people claimed. The only reason I would get this new direct drive is to get rid of that loud fan the PC racer has. Never thought it would be so loud. Can't race without headphones on.

I have a TSXW and a CSL-DD. To be honest, I sort of prefer the TSXW in a lot of sims. I actually have to add in quite a bit of dampening to get the DD to feel more like what a real car feels like. By the time I’m done, it’s like a TSXW with an extra 3nm of torque. The only thing where DD is vastly better is drifting. But even there the speed of the DD is actually unrealistic and gives you bad habits if you carry those over to IRL (IRL the steering wheel doesn’t spin like a greased roulette wheel when you counter-steer).

This is very helpful to me as I am getting started with Stop Motion. I'd like to know more about your set-up. Thanks for sharing!

Very informative, thank you!

CAn you share the files to that Rig? im buiding my own with ur guide. thank you hope fully youre able to share it

You are the man!!!!!! I’m doing this !! Thank you so much

is it possible to buy the project to print it in 3d? and an instruction manual?

Hi Steve, could you advise which Windows macro recorder you're using please? Thanks/Dave

Thanks for sharing the amazing work ! Would you have the STL files of your build ?

Much as I like to smoke cigars, if you take away clean air and a good atmosphere, I kinda don’t want one. Sitting in a 5’ cube tent - even if you could clean the air - would be a pass for me. I’m lucky to have relatively mild winters where it doesn’t stay too cold for too long. But I think my answer to the winter problem would be dropping by my local cigar lounge 1-2x a week in colder months. Or creating a dedicated room in my house with in-line fans and powerful air ionizers.

Awesome video! Thanks for your time, money and effort mate

The turn that one around and made it into a C coffee aparatus spanner on the left then deployed popcorn goggle as mouth with arrow on the bottom lip facing down with the black and dark grey merc situation

Why would an adult man smoke in the garage of his own house?

I upgraded from a g920 to Thrustmaster wheel base and pedals , belt drive. It is far better than the g920 . I would love to get the direct drive wheel base that you have in this video but will have to wait until prices drop or a used one comes available in the future. Thanks for the informative video. Best wishes Brian.

How do you secure the hose to/in the tent? Did you use one of the cutout windows or something else? Thanks!