- 85
- 98 501
Tynee Electric Skateboard
United States
Registrace 29. 04. 2021
Tynee electric skateboard official CZcams channel. Buy best electric skateboards at www.tyneeboard.com
How to remove the pulleys from the electric skateboard motors?- Tyneeboard.com
When you want to install gear drive on your electric skateboard, you need to remove the pulleys on the motors. The simplest way is to use a hot air gun to heat the screw on the motor pulley. Because this screw is coated with high-strength thread fastening glue, it is difficult to remove at low temperatures. However, as the temperature increases, the thread fastening glue will soften, so you can easily remove the screw. thank you.
View more: Tyneeboard.com
if you have any questions please feel free to contact us. thank you.
Tynee official store: tyneeboard.com
Email: tyneeboard@gmail.com
Instagram: @tyneeboard
WhatsApp: +8615112692766
Facebook: Facebook.com/tyneeboard
#electricskateboard #electricskateboards #electricskateboarding #tyneeboard #tynee #tyneemini3 #tyneemini3pro #tyneeexplorer #tyneeultra #boostedboard #boostedminix #geardrive #electriclongboard #electricshortboard #electricminiboard #esk8 #electricskateboardsusa #esk8life #meepoboard #meepo #backfire #backfireboards #exway #exwayboard #exwaywave #evolveskateboards #evolvestoke #tyneeultraxpro
View more: Tyneeboard.com
if you have any questions please feel free to contact us. thank you.
Tynee official store: tyneeboard.com
Email: tyneeboard@gmail.com
Instagram: @tyneeboard
WhatsApp: +8615112692766
Facebook: Facebook.com/tyneeboard
#electricskateboard #electricskateboards #electricskateboarding #tyneeboard #tynee #tyneemini3 #tyneemini3pro #tyneeexplorer #tyneeultra #boostedboard #boostedminix #geardrive #electriclongboard #electricshortboard #electricminiboard #esk8 #electricskateboardsusa #esk8life #meepoboard #meepo #backfire #backfireboards #exway #exwayboard #exwaywave #evolveskateboards #evolvestoke #tyneeultraxpro
zhlédnutí: 72
Video
How to install gear drive on Tynee Mini 3 Pro electric skateboard?
zhlédnutí 517Před 19 hodinami
This video shows how to install the gear drive kit on Tynee mini 3 pro electric skateboard. View more at Tyneeboard.com. Tynee new generation all stainless steel helical gear drive for Tynee mini 3 pro. Tynee mini 3 max. Tynee stinger and Tynee ultra x pro are ready. The new generation gear drive significantly improves smoothness, quietness, and durability, making it one of the best gear drive ...
How to swap the deck of Tynee ultra electric skateboard?
zhlédnutí 279Před měsícem
This is the video which shows how to swap the deck of Tynee ultra electric skateboard. If you have any questions or you want us to shot any other videos about electric skateboard. Please let us know. Thank you. View more: www.tyneeboard.com
If you can’t turn on your Tynee Explorer. How to diagnose whether your ESC is good or not?
zhlédnutí 247Před měsícem
If you can’t turn on your Tynee Explorer. Don’t worry. We will help you out. Please find the spare diagnose cable in your skateboard package. and connect the charger to the ESC directly. Then try to turn on your board. If you can turn on your board and use the remote to control the motors. Your ESC is good. The issue is the battery. If you still can’t turn on your board when you connect the cha...
How to swap bearings on Tynee boards?
zhlédnutí 115Před 2 měsíci
How to swap bearings on Tynee boards?
How to swap pivot cup and bushings on Tynee boards?
zhlédnutí 92Před 2 měsíci
How to swap pivot cup and bushings on Tynee boards?
How to disconnect the connections on Tynee stinger?
zhlédnutí 51Před 2 měsíci
How to disconnect the connections on Tynee stinger?
How to diagnose whether your ESC is good or not?
zhlédnutí 173Před 2 měsíci
How to diagnose whether your ESC is good or not?
How to pair the remote to the Tynee mini 3 hub motor board?
zhlédnutí 373Před 2 měsíci
How to pair the remote to the Tynee mini 3 hub motor board?
How to let the ESC to study the motors?
zhlédnutí 264Před 2 měsíci
How to let the ESC to study the motors?
How to swap the ESC of Tynee Mini 3 Pro?
zhlédnutí 328Před 2 měsíci
How to swap the ESC of Tynee Mini 3 Pro?
If one motor doesn’t work. How to diagnose the issue part is the motor or ESC?
zhlédnutí 100Před 2 měsíci
If one motor doesn’t work. How to diagnose the issue part is the motor or ESC?
How to connect Tynee board to mobile App?
zhlédnutí 864Před 2 měsíci
How to connect Tynee board to mobile App?
How to check if the noise comes from the motor?
zhlédnutí 46Před 2 měsíci
How to check if the noise comes from the motor?
How to swap the 259Wh battery on Tynee mini 2?
zhlédnutí 192Před 2 měsíci
How to swap the 259Wh battery on Tynee mini 2?
How to swap the 363wh battery on Tynee mini 2?
zhlédnutí 231Před 2 měsíci
How to swap the 363wh battery on Tynee mini 2?
How to swap from DKP truck to TKP truck on Stinger?
zhlédnutí 429Před 2 měsíci
How to swap from DKP truck to TKP truck on Stinger?
If the remote spring fall off. How to fix it?
zhlédnutí 158Před 2 měsíci
If the remote spring fall off. How to fix it?
If only one motor work. How to diagnose whether the ESC or motor cause problem?
zhlédnutí 96Před 2 měsíci
If only one motor work. How to diagnose whether the ESC or motor cause problem?
If I can’t turn on the board. How to diagnose whether the issue is the ESC or battery?
zhlédnutí 184Před 2 měsíci
If I can’t turn on the board. How to diagnose whether the issue is the ESC or battery?
How to swap hub motor on Tynee mini 3?
zhlédnutí 59Před 2 měsíci
How to swap hub motor on Tynee mini 3?
How to swap the 72A 105 wheels on Tynee mini 3?
zhlédnutí 186Před 2 měsíci
How to swap the 72A 105 wheels on Tynee mini 3?
How to tighten the screw which lock the hub motor to the truck?
zhlédnutí 68Před 2 měsíci
How to tighten the screw which lock the hub motor to the truck?
Don’t touch the throttle when you turn on the remote.
zhlédnutí 167Před 2 měsíci
Don’t touch the throttle when you turn on the remote.
Fireproof Bag For Electric Skateboards - Tyneeboard.com
zhlédnutí 478Před 2 měsíci
Fireproof Bag For Electric Skateboards - Tyneeboard.com
The gear puller is a 1:1 copy from Linnpower, and the gear drive structure is a 1:1 copy from Acedeck mini Geardrive. At least you could change the number of teeth, which would be better than just copying it directly, right? It's really embarrassing for you, a disgrace and scum in the electric skateboard industry. Ashamed.
The gear puller is a 1:1 copy from Linnpower, and the gear drive structure is a 1:1 copy from Acedeck mini Geardrive. At least you could change the number of teeth, which would be better than just copying it directly, right? It's really embarrassing for you, a disgrace and scum in the electric skateboard industry. Ashamed.
Thank you for your response. As I reviewed many youtube videos on the tynee ultra belt, I have noticed that specifications of the motor from youtube tubers, says they have 600 watt *2 motors, but the website at tyneeelectricskateboards, states that the same skateboard has 875 watt *2 motors. So I'm a little confused on what the actual motor size is. Especially Scott Davies youtube, on the tynee ultra belt, review states They're 600 watt *2 motors. So could you please be specific on the specifications onto whether the tynee ultra belt has either 600 or 875 watt *2 motors? Is there a way to verify what size motors are on the tynee ultra belt?
I got three questions relating to this tynee ultra belt eskate. 1) When you took off that battery box was there a 'bms,' connected to the battery? 2) Should I be concerned about charging the battery over night, or only charge while watching it, so it will not over-charge and explode? And 3) how well is the water-proofing rating, such as have you had any issues with water leakage with your electric skateboard? Just in case I had to ride in rain do I have to be extra cautious about getting water in the battery department? Over all I'm really concerned about the EVE battery that is in this board, so if you have any comments about its safety rating especially charging it, that would be great. Thank you.
@@HeatherManwell-q3m Hello. For your questions. (1)Yes. All Tynee boards have BMS. It has over charge protection. It’s a basic function in Tynee batteries. So don’t worry. (2)no problem. (3) usually it’s no problem. Since July 2023. We have upgraded the battery cover to not break at least 10 years. The water damage of the battery reduce a lot. And when the water get in. You can open the battery enclosure and let the water get out. Then it will be no problem. (4). For the EVE battery. Actually it’s pretty good. It’s used on a lot of electric cars. So don’t worry. Thank you
Many of these parts are 1:1 copy of our own street wheel gear drives parts. We will share more details online.
Bro? 💀
Hope they start releasing the mini 3 pro with them already on 🔥 will be my next board if so
Please show for the tynee explorer
I tried to assemble a customized tynee mini 3 pro in a shopping cart with TKP trucks, gear drive, no deck, cloud rovers, and the rest standard parts (best battery option) was almost double the price of mini 3 pro with best battery. While I don't need another eskate, would be cool to have more customization for the mini 3 pro such as the aforementioned. Seems wasteful to have to buy a belt drive only to convert it day 1. Always recommending Tynee to friends who are curious about starting to eskate just the same.
When Will Tynee make Gear Drive for Ultra X Pro??
They already have it on their website. Read the description of the video! Have fun!
Can we spray paint these black?
Dont use spray paint use Gun bluing
Thank you Aiden.
No moto Guard
*Yewwwhh!* 🤙🏽⚡️🤟🏽⚡️👌🏽 Lookin forward to seein gear drive on the Stinger and maybe the Ultra too 👌🏽
NICE. First lol
Avant de changer mon esc mes deux moteurs étaient fonctionnels. J'ai suivi la vidéo à la lettre et un moteur ne fonctionne plus, il n'est pas mal branché j'ai testé plusieurs fois, seulement quand je démarre même a vide ( sans être dessus et skate retourné) la le moteur bouge à peine. Il bouge d'une petite impulsion contrairement à l'autre qui tourne sans problème.
This doesn’t work with my mini 3 pro remote
@@kitten3461 Hi. What’s your order number please? If your Mini 3 pro use Explorer remote. You can follow this video to enter the menu on remote: czcams.com/video/zMr5KCVWoPs/video.htmlsi=skUw9whb3ZFpxEWu Thanks
thank you. this will be very helpful for when i need to mail the battery home seperately due to airline regulations.
Does it work for tynne ultra belt motor
@@LaKingJaGo Yes. It works.
Great video Aiden!! Absolutely loving your ‘how to’ videos and will be getting my board very soon 🤙
What kind of glue should you use to fix the side panels back that you took off to get to the screews of the battery/esc ?
Thanks . 🙏
How long did it take to ship to you?
Could you do a video of Ultra SL motor replacement? Thank you for these videos they are helpful
@@miguelpb3683 Okay. We will shot one in next week. Thank you
Is it really needed to change that isolation sponge beneath the battery enclosure? I would get a second battery and quickly change only that during the long range trips. Would that be okay? EDIT: I just read on your website that the newer Molicel P42A cellpack is larger than the one from 2 years ago (probably 21700 instead of 20700 cells), so that's why.
Just switched from All Terrain to street wheels on my Explorer, so I needed this video. Thankyou.
@@mycoolo304 thank you
How do you adjust the speed mode from aggressive to smooth.
Very good and easy way to check for anyone.
Will do
Hi, do you know which replacement pivot cups fit best from Riptide? I came across a review that the caliber II/III have a better fit than the paris V3 option.
@@Greg-pe1yg Hi. You can ask the riptide whether the Paris V3 pivot cup is the same or not with caliber truck. If they are the same. Maybe you can use either of them. Thank you
Hi,is this same for tynee mini 2? Mini 2 doesn't have motor pole 7 option...?
@@Louisman1992 Hi. Yes. It’s the same. If you didn’t find the motor pole 7 option. Then just ignore it. Because when you select Belt on the motor type. For some remote. It will be 7. Thank you
@@Tyneeboard Noted. Thank you
Hello! I was curious if if voided warranty to use silicone caulk for additional water proofing on the outside of the boards casing
@@itzlethal1700 Hi. You can do it. It will not avoid warranty. Actually many customers do that. Thank you
@@Tyneeboard you guys are amazing and always quick with the responses thank you 🙏
@@itzlethal1700 thank you. We really appreciate your support.
i really love my board but is it also possible to show a video on changing to all terrain?
@@dangelo0306 Hi. Which board you use please? We can shot one. Thank you
Can you put a battery with more range on it?
@@SkateZombie Hi. Do you ask the mini 3 SL battery please? Now we have 288wh battery for it. If you think it’s still not enough. The biggest battery it can use is 10S2P Samsung 50S 360Wh battery. But we have to customize it because we don’t sell that battery at present. Thank you
Are those off-road trucks and wheels
@@kaeking86 yes. It is. Thank you
Does this work on the mini 3 pro?
@@joshko7415 Hi. yes. Mini 3 pro is press 3 times. Not 5 times. Other things are the same. But we don’t suggest you to do that. Because it has a small risk because if your motor hall sensor is broken. Active the study mode will not be successful. And then the program in the ESC will be not correct. Thank you
This was so helpful thank you
@@dinoduderocket you are welcome. Thank you
When tynee is going to introduce mud guard, to protect the board from water and dirt.
does it work the same way for Mini 3 SL too?
@@LAGG3R it’s a little different. If you want we can shot one for the mini 3 SL. Thank you
@@Tyneeboard please do 🙏
@@LAGG3R Okay. We will shot one. And upload it on our CZcams channel. Thank you
🤙🏽⚡️🤟🏽⚡️🤙🏽
🤙🏽⚡️🤟🏽⚡️🤙🏽
Always helpful @Tynee
Yeah i did this and it still didn't work even with the new motor, my issue is i believe i messed up the ESC learning mode when only one motor was working and now i have 2 working motors i am unable to get the ESC back into learning mode.
@@gingerdude94 Hi. It’s easy. Connect the good motor to the not working ESC side. Disconnect the other side ESC with the bad motor. Active the study mode again. It will let the not working side ESC study the good motor. Thank you
Thanks for the Video, I'll give this a try on Saturday 🤞
i have a mini 3 pro, it doesnt have a belt cover
Hi. Mini 3 pro doesn’t have full belt cover because mini 3 pro motor size is too big. Only mini 3 has full belt cover. Thank you
can you explain the two battery icons? also how do i get to the settings menu on my mini 3 pro?
Hey Tynee should I get an ultra or something from of different company like backfire?
Do I need anything else for the wheels to go on the mini 3 pro or just buy the wheels ?
You may need to buy the pulleys. Thanks
Thank you!
So do you recommend the Mini 3 Belt over the Mini 3 Pro for city cruising and wet/rough conditions? I’m a beginner. Thank you.
Can ship to Indonesia?
Sure. We can. You can get to the final checkout out and input your Indonesia address and checkout. Thank you