Video

Thank you very much yes I know we have natives all over from the Rez thanks for watching and support

I am using 50lb power pro braided main line with a 30lb monofilament maxima line for my hook & egg loop. I use a 18 oz banker sinker to keep my hook close to the bottom of the river. Thanks for watching and great question.

1/2” group at 200 yds with factory 143 eld-X ammo I have not started load development for this rifle yet. I bought 10 boxes of eld-X ammo because of the ammo scare awhile back, I shot 2 elk at about 300 yds n had both bullets get stuck in the hide on opposite shoulder. Full mushroom of the bullet, both elk died 100 yds apart

That Mountain is so steep even the horses in the past loose there footing and stumble down the mountain along with the riders coming off the saddle also. You should come watch it in person it’s quit a race. My drone couldn’t get to the top of the mountain because of flight restrictions on it. Have a good day and thank you for watching.

Thank you for Subscribing and hope to see you out there somewhere. Have a great day

Please refrain from negative comments and talking trash do your part on conservation please.

@@Warmspringsrezbuck no negativity all conservation.

Yes I have it for about a month now great investment for videos

You will have fun with it

Tikka T3 Roughtec 6.5 PRC suppressed 2790 fps

You heard correctly. I have over 20 Tikkas. Excellent accuracy. Less than ideal velocities with factory ammo. I'm taking my new 308 Tikka T3x Roughtech Ember shooting tomorrow for the first time along with another new 308 Tikka T3x Hunter stainless superlite

Nice just have to find ammo now

@@Warmspringsrezbuck academy sports outdoor ordered 1000 rounds

@@TerrySprey Thank you I also ordered 500 rounds of the Winchester 20 gr. Thanks for watching the channel and looking out for fellow Varmint Hunters.

Yes I love the action on these rifles there buttery smooth and lightweight to carry in the woods. Pretty accurate out of the box and if we do our part on shooting it’s almost as good as a custom rifle. Thanks for watching!

That’s good to hear I also shot the 147’s match ammo and it also likes it too but I wasn’t sure of the match ammo for hunting deer and elk size game.

Who’s this? Fellow Springer?

@@Warmspringsrezbuck eeeeeee

I tried with my bow but no shot so I was down to the wire on end of the hunt so I opted for my rifle last minute. Thank you for watching.

@@Warmspringsrezbuck I am nezperce from idaho...have hunted bighorn for longtime..both my daughters have harvested nice rams..was my favorite hunts...

@@garysublett3493 My e mail holliday_ws@yahoo

I had it threaded and ordered it a barrel protector on midway USA for it also. Thanks for watching and please subscribe. Have a great day.

I it’s The Answer muzzlebrake

@@Warmspringsrezbuck ok what thread pitch is on your rifle thanks?

I’m posting the short video for you now on the Tuber

The video is up for you @z06ix hope this zoomed in video helps let me know if you need more help.

@@Warmspringsrezbuck awesome what is your thread pitch that the gunsmith originally threaded on your rifle?

The packaging I have for the muzzlebrake says I ordered the 1/2”x28 tpi. Meaning threads per inch. .308 caliber

@@Warmspringsrezbuck Can I ask why did your gunsmith recommended the 1/2x28 thread, why not the 9/16x24 pitch? Thanks....

No I did not

@@Warmspringsrezbuck please let me know if you receive this comment. I found out that yotube does not allow giving emails in their comments.

@@z06ix I received your comments but no email address. I posted a short video on the muzzle brake

Thanks hope you liked the video, please subscribe

ok all the gunsmiths are telling me that that pitch has too much metal taken out and recommended 9/16x28 or 9/16x24 pitch. I was also thinking about getting the answer, do you have all the set screws on top taken out? Why didn't you go with 9/16x28 pitch, has less barrel material taken out.... also is the answer pinned on with loctite or do you have a torque setting? thanks....

@@z06ix Sorry for the late response, I do not have any screws out on the top of the muzzlebrake. I mostly shoot prone and I didn’t want any muzzle jump. Also I do not have the brake set down with loctite or anything.

@@Warmspringsrezbuck ok nice since you have all the set screws on top installed, did you have to loctite them because they are so small and do they not come out when you shoot?

is this how your 28 nosler liberty is setup? 1/2 x 28 thread with 5/8x24 adapter? sorry for all the questions im trying to decide what to do with my rifle, I have the exact same one.

What is your e-mail? So I can give you a more detailed video for you.

That would be cool!

@@Warmspringsrezbuck Yeah....Im in Portland. Let me change the starter first then we can meet up. Thanks.

It was great to see everybody out supporting our Veterans past and Present. 🇺🇸

Me n the Bros just joking around getting ready to scrape some deer hides.

Thanks for watching! Have a great day.

You can buy your suppressor from Silencer Central and yes there are many model to choose from. I have a Multi-Caliber suppressor for my needs because it works from a 300 Weatherby all the way down to 17 hmr caliber. Interchangeable on barrels. Have a great day and thanks for watching.

@@Warmspringsrezbuck thank you so much for the info, very much appreciated! Glad to be a fan of your channel. #HumbledAlaskan🥶💯

You can get them Thru Silencer Central online. Also the new version of my suppressor is called the Banish 30 multi caliber up to 300 win Magnum caliber

Sorry if you couldn’t hear me I was using my iPhone to record, kind of a last minute decision to make a video

Yes they are very hard to spot sheep if you’ve never done it before but fun. Have a great day and thanks for watching.

It’s all worth it with family and good friends around. Thanks for watching have a great day!

Nope just stocking up for the winter and the smoke shed rolling smoke.

Well thank you and I hope you enjoyed yourself here

Yes I did 5/8x24 thread pitch for direct thread

The new version of the Varmint 4.0 is the Banshee 30 titanium model it’s good for multi calibers from 17 hmr up to 300 Win magnums. But if your strictly use it for small calibers I would look into a small suppressor made for the lighter calibers. Multi use caliber suppressors are great for all rifles but for a 17 or 22 caliber would be a better suppressor in noise reduction for the light calibers. Thank you and please subscribe

The fireworks were just as good as the main show lots of mortars from private families always great illegals in Warm Springs, Oregon

I only get to watch the illegals because I’m always lighting off the main show. Lol

I read only 181 were sold in the United States. Wish he made a video how to change starter on 2lt.

I had rebuilt my starter on my truck because I couldn’t find one for sale new.

@@Warmspringsrezbuck i bought one starter oversea from Ebay.

Yes if I’m fishing by myself I usually net and fight the fish at the same time

Wow is this on the warm springs rez? Amazing river, I hope the round butte damn is removed one day soon

@kfjcnrlkvlkvg Yea this is in near Maupin, Oregon. A popular rafting and fishing spot

Yes me too in my lifetime

Thanks for watching unfortunately due to my sons vehicle accident there Will be no more rodeo videos on my channel, keep praying for his full recovery and health. Also pray for his girlfriend, family being there for him also

I’m not sure on that I am not up to date on new model I’m pretty happy with this bull barrel 17 wsm have a great day and please subscribe

@@Warmspringsrezbuck it’s just a semi automatic version.

Ok I still love my Bolt actions might be a little more maintenance on cleaning though.

It is the BSA Sweet 17 wsm scope

It is a BSA Sweet 17 scope made for the 20gr & 25 gr ammo Have a great day

Thank you have a great day and please subscribe