Video

Did you prime the pump first?

Appreciate you showing how to replace the fuel filter. Should be pretty straightforward now that I’ve watched your video, thanks for taking the time to put it together.

Just changed the alternator on my 2010 Ranger 4.0 litre this morning, and thanks to your video it was a piece of cake. Thanks for posting.

Ethan: green is my favorite, Color

Coleman

The reason it may have not work is because the original with the super capacitor uses 2 super capacitors in series to increase the voltage to about the working voltage of the lithium battery. One super capacitor barely makes it to 2.7 volts and that is not enough to power the camera or to keep it powered in order to give it time to save the last recorded video. If you put two super capacitors in series you raise the voltage to what the camera needs to make it work. You can also make two sets of 2 super capacitors in series and put those sets in parallel to increase the charge capacity. I am using 4 super capacitors of 2.7v - 7.0F. The higher the farad the bigger the capacitor and the more charge in can hold. I don't own the same camera you are trying to modify here but the mod would be same for any device that needs a super capacitor instead of the lithum battery. Your only limitation would be the space inside the camera to add bigger super capacitors.

Thanks my friend, I am ready for job in my truck. Im from Argentina

What a beautiful sound

Put your check valve on the other end of the line, eliminate the running pressure in the rubber line.

Bro info me your trunk lit cover around look so sick ✌️

Me trying to find redneck frame repair “7 year old bangers “

Thank for your time, it great job and video

Did you find out what the noise was?

This was my exact problem thank you brother

Liquor tank? I just met her!

I use to put my little brother in that middle seat, yes it was very awkward trying shift gears 🤣🤣

so u just cut the seat?

Much easier than I thought. Thanks! 3:35 p.m. 6/19

All I can think of is that you would want a switch in the cab to turn off the fuel pump and you'd want to turn the engine over while the pump was priming the oil. Then you'd be good if the theory of the whole thing is correct.

Thanks for the video, but it would have been even nicer for you to show the engine light going away after you turned on the engine

This guy needs to watch some youtube videos that shaft can be bent back straight...

Saved me so much labor time appreciate you !

Really cool stuff, that old red machine to your left at about 2:40 is an eye catcher too.

Isn't the torsion bar going to suffer from metal fatigue sooner or later ?

The news channel must have heard your working! LOL

Nice work. You might like to get an accumulator. (google it) I have one and I pre-lube the engine at 40 psi before I turn it over. 😉

Did u use the stock bolts ??(

Mr. Tire wants to charge me 485.00 to replace a gas cap and purge valve.

nice 15fps

Mine does the same thing what was it?

Thank you. Was at my wits end cuz I had to destroy my whole Lock and all the hardware to get the old one out and totally forgot how it went together!

What year explorer??

Hello been trying to find the filter for the transmission. I was told it looks like the shape of a muffler. Can you or able to make a video on how to change that please.

Show us what it sounds like next time.

6 years later, still waiting bro.

😮

Sounds like you need some chain lube

Did you ever find out what it was

Gęstego yurlawmower. Drunk. On Booze. Eh

Do you think this would work for a regular cab?

Just use fishing wire and floss it up and down until it comes off, and rubbing alcohol to clean. You are making this way harder than it needs to be.

Thank you so much for your instruction. WoW. You and the young lady at AutoZone (don't worry, I'll remember her always) did in one evening, less than five hours, what organizations such as Spectrum, State Farm, Randy Tyler Changing eye candy, Allstate, MLB, the NBA not the mention the "City" of St. Louis naming only some. Actually, God and his begotten Son Jesus, led me to the both of you today so; cap, insert feather. Sincerely, Josh Brewster, 3716 Fairview Ave Saint Louis, MO 63116.

Great video! just crawled under my Ranger and fixed it in less than 5 minutes

Amazing. A hit and miss engine powering a lawnmower

I saw this in Ohio and Pennsylvania where old growth forests had major clearing for solar farms. People politically market a technology as, "green," and don't talk about how red it also is, or the pros and cons of that technology. That's why it was covered up even by "green people," for over a decade that much of our recycled plastic was being hauled on barges and burned in poor, Asian countries. They were "saving the world," and their associates who knew didn't tell them they weren't.

They’re talking on their walkie-talkie radios that are using a scrambling voice system. You can hear that squawk sound that’s only on a Motorola or some sort of Kentwood but most radios have that little scrambler and no, they’re not speaking Spanish

lives it's life one sled beating at a time ... :)

My neighbor had the same problem. My takeaway is; if you aren't running it constantly, get an electric!

I’m working on the same engine and same issue with it.

Cranked my stock torsion bars all the way on my 02 sport trac, replaced all front suspension and got the shock extenders and it rides pretty damn good! I am very happy and i got another 1.5-2in in the front! Nice video explaining how the torsion key suspension works.