Video

@@amir_ali77 Yes..People avoid trouble and risk normaly but she jumped in front for the girl.!

Yes😂😅You must have heard my grandpa speaking about bush🤣🤣

I think it was around 600-700 all together with the clutch and the flywheel...from luk...but i dont remember good!!

I will do my friend thank you for watching

@@Kristi98 You are welcome

The timing point is in the back of the engine there is dots on the gears from the cranksharf and the camshaft...the camshaft is located in the block so you must remove all the back piece of the engine to access the timing an to remove the camshaft..!

@@Kristi98 poderia fazer um vidio de como por ele no ponto de sincronismo obrigado

Yes my friend...i could have made it a little more detailed...but i made this on my work so i must get it done so i made the most photos i could.!!Thank you very much for watching!!

I dont know the cost...i had the parts for this depends what you have you have the motor!??you have a jack you have the mettal the wires!??And it depends you can find those things localy at second hand car parts...the motor and maybe the jack

🤣🤣🤣🤣

Thank you my friend for watching...yes levels like this are very mindbreaking...you must play with your luck a little and try little adjustmens untill you find the perfect spot.!!

yes..chevrolet/daewoo kalos

I dont know my friend..but i know this is a mercedes atego engine....it gives a 4 cylinder and a 6 cylinder.!!and its quite a good one.....!!

Yes my friend cummins.....from all the trucks i have seen in my years of work....This engine doesnt care its built like a tank reliable and quite strong...only one i have seen go broken and that was becouse they let it run out of oil......i have openned one in 800k km for rebuild the owner buy it and wanted it rebuild and it was in perfect condition.!!

I dont know my friend i have not instaled one in a camry before...but as long as you have space in the dash i mean two removable slots them yes it must go...this radio can adapt on these kild of mounts like i have and on a double din one....but every car is diferent..if it has two slots devided with plastic from the dash it dont fit then..!!

No my friend what you want to know

What the problem turned out to be

the bearing broke and everything was welded together and broken apart...the driver said he didnt hear anything untill it stoped moving..!!!

Yes

Thank you brother...unfortunately for me i had to see the inside of this engine like 3 times...i recently put a new engine...and i hope it goes for a while...but this is a good car i like it...confy fast good handling....it a beautifull car also

I didnt make one bro sorry if you have any questions and i can help you i would be glad to.!!

yes there is...you can use a obd scanner to do it or...the way i did it you bridge two pins on the obd with a wire the 5 or 6 with 16 i dont remember i will search....and basicly you reset the clutch to zero with that and after the new clutch you make it read it has a new clutch...then after this you must go for a first drive and change all the gears to a certain rpm so it learns them....the coding to reset and then learn the new clutch is done with the gearshift...its a sequence you must follow for every step....like N R -1 +1+1-1+1 R N i will see if i can find it and put a link.... www.partinfo.co.uk/files/INF12215_GB.pdf i find it.....go to the link and follow the instructions it quite easy....you must do some steps before starting to remove anything... you will hear your car responding while you do this steps....the actuators etc...a guy asked me 300 euros to do this with the obd...but i did id for free like tis so....i hope i helped you thank you for watching my friend

I think yes

sorry bro it take me so long to respond i dont know the exact name of the radio i buy it on a local chinesse shop ...this is it i dont remember how its called exactly czcams.com/users/shortsfZL-LnEXgfs

The oil water cooler was cracked

They come with this car.!

No you just change the wirimg harnes you put the one that comes with the new engine i think only a few wires are different but since the ecu comes on the engine i dont think you need to change many things......but you need a little tuning with a computer to make everything work...i think its a lot easier than from the flat 6 to the V8

Do you have an e-mail or something i can conntact you i have a lot of questions

Who did tune the v8 in that truck? or did he only install the new ecu to the coordinator?

Yes my friend it can be used.!

Retarder oil is the red thin oil that the retarder uses to slow the truck down without brakes

Normaly you have a wire connected with your handbrake so you cant use the sreen video player while driving i think...you must find the wire that says parking and connect it to the wire that brings power when the key is on.!!And it must fix it...or maybe if it doesnt say warning not screen active ehen driving then maybe you need to disconect/cut the wire behind radio that says reverse becouse it activates the camera when you reverse..but when driving normally i dont know it doesnt make sense why it doesnt work.......i have installed now a new one din pop up screen one that i needed to bridge the power wire from the key to the handbrake signal on the radio becouse it wouldnt let me watch videos while driving..!!What kind of car you have!?

I dont remember on any faults my friend...!!

Ναι φιλε μου.!!

Yes my friend😊

Its easier that it seems

No my friend..only the screws maybe the radio dont have vut the holes must be there normaly no new frame is needed😊

Απο Βεροια!

@@Kristi98 μεγια ρε λεβέντη με άρεσε η μετάφραση έτσι τα δίνω και εγώ τα αγγλικά με καλό το λέω καλό χειμώνα καλές διαδρομές καλά βουνά ...... δώστε τα όλα

@@user-wn6rr9el2w Ευχαριστώ πολύ.!!