Video

Is it possible to flip the gears from left to right and vice versa to maximize use of the gear?

Excellent video thanks for the info

I hsve a issue where the return spring for the carb i konda bend it but fixed it but now i start on choke but when i slide to run it idles weird and wont take off

old video but still works....i will caution ya though. talked with an older than me lawntractor mech.....he says yeah if the brake is obstructed,,,,but a little looseness in the drive belt is cause the pulleys are made of a plastic fiberous material...i.e. wear faster with the tighter drive line

Bro you are amazing 🎉❤ THANK YOU SO MUCH BEEN A PAIN IN MY ASS. ❤❤❤

I need this advice on a cub cadet zero turn. Trans belt is slipping. Can’t go up hills or fast

Can those gears be greased or lubricated to keep them from grinding or wearing down so quickly? The reason I ask, I hear a light grinding noise in mine now, it's not as bad as the one you just repaired but I would like to know What can I do to prevent that from happening to soon. If yes what type of grease can I use?

Thank you for posting! I was able to install the new handle in a short-time with your help. Thank you also for mentioning the spacer. Back to mowing.

J'ai vraiment besoin du numéro du courroie de transmission

Do you leave the black piece in there? This is my first doing something like this.

My trimmer head just went kaboing and I replaced it with the speed-feed head. This video was a huge help. Thank you!

Thank you! I’m glad I found your video I just needed to see how the belt was routed. Glad I did before I went and wasted money on a new belt!

Nice job! I have done a few of this engine and doing one tomorrow. Needed a refresher. One little thing is maybe show the ring assembly better on another video. Thanks

I have used Hipa carbs in the past, and they are great replacements for OEM.

Thanks for this video. I was going to try running seafoam through it but I think it’s best to just replace. The previous owners hardly ever ran the gen so I’m guessing it’s pretty gummed up. Best to replace and properly maintain the new carb. I’m basically a rookie so this was super helpful!

Those engines are known for exhaust valves seats coming out

Thank you for the informative video.

Why didn't u check for the crap under the mower first ..mine is clean.. now what..??????.😢

Js so yk this shit don’t work

I recently took interest in carts and bought one to redo and stumbled upon your videos . I feel as though I can rebuild mine after watching you

Would like to see

Picked up the same mower for free wouldnt move. I noticed if i pulled the brake pedal towards me it would move fine. Cleaned all the shit out and now it works perfect

John Deere la145 same engine same issue thanks for the video

Thank you for sharing

2:09 clean out from underneath ur deck bro its caked in grass

why is my belt smoking when I try to use the angled adjustment?

Excellent instructions, top video work. Thank you

I bought my Colman CT200U minibike new 8 years ago. put about 5 miles on it and stored it in the barn for the past 8 years. I got it out of the barn yesterday (7/4/2024). The gas tank was empty and free of any contaminants. I removed and cleaned the carburetor. Changed the oil. New gas. It started right up when choked, but went full speed when I opened the choke. I took off the spring like you instructed, but it still runs wide open when the choke is off. Any suggestions? Thanks.

Unsure on the costs of labor that your video saved me, thanks a lot. 😁

What liquids are you using?

It would be good to know what Super Clean uses for a dilution in their pre made containers. And what your Simple Green dilution was. We could be talking apples and oranges.

Good honest video, no one is perfect 👍🏻watching in Canada. Looking for the drop in segment!

grass and belts don't mix drive or deck. thanks for the vider

Bent valve cover, pretty common 😮

As a 4th generation, At 70 years old I have watched this state go straight to well you know. With a super majority in state legislative, those who think are at a minority. I hope this one comes to bite him on the bisques! Here are two examples that will be a real problem. And as a utility employee for 40 years I know this info. #1 New housing building a new tract of homes the builders need portable generators, no power there yet. #2 In a storm almost all tools on emergency trucks are gas. I am sure none of you would got out in a major storm with an electric saw! (If they even make one that big) A side note I was at local hardware store yesterday, elect mowers jumped 100.00$

You have joined "Scotty" of Star Trek (TOS) fame as a "miracle worker" in my humble opinion. Saw this video and wondered if it might restore my YT4000 from being dead in space to warp drive capable. Applied your fix. Presto! She's back to plying the vast reaches of my assigned space sector, cutting down unruly upstarts that would otherwise impede the flourishment of civilization. In all seriousness, Thank You for this amazingly spot on video.

What's a good battery charger / maintainer? Is there one you recommend?

I appreciate your video. The way you explained things clearly, in a way I understood. Thank you !

So you have to remove the deck first?

My on mine was lose so replaced it it was still loose come to find out the bolts on the transmission mount was missing replace bolts now belt is tight

Is the snowblower carb different than the yard machine tractor carb?

I was way over thinking this! Thanks

Thanks, my case was a little different but same diagnostics. Belt came off two pulleys and one carrier. Back on and working well. Belt two years old and fine.

I have seen replacement gears for rear wheels (the gear that is riveted to the wheel) that is way less cost than buying the wheel, how would someone replace that part that is riveted ?

This was so helpful. Gave me the courage to try it. Thank you

Great DETALED video... Just bought a old TB525CS for $15 that runs but BAD... Hope this is the Fix. THANKS!

I have the same problem. When I rotate the grip throttle, the rod & spring doesn't move back n forth. Ideas?

I have a Kohler that starts to flood out, when the PTO is engaged and you hit a rut in the yard. The engine will die and will restart with ease. I'm looking for an electrical problem, since the carb has a fuel shut off valve.

What's the name of the lift u bought