Video

LMFAO. Thhhhhhaaaaaatttttttssssss ME!

You know, last night after I posted this I went to watch some other people's videos and checked IG and seen everyone else got stickers in their boxes where the COA was at. HaHa. Mine must of been packed up right as the lunch bell was going off and he forgot to put them in. It's all good though, at least they didn't forget to put the most important part inside the box haha. But I'm loving the smooth jet black finish. And couldn't agree more these are absolutely well worth the money. And the more I carry it and use it, it feels like it's breaking in so smoothly.

One of mine had 2 stickers. I must have got yours 😂.

@@ernieestes3380 😆😆 probably!!

How do you like them? Do they seem to last longer for you as well? I know I have used a few different brands over the years but the Lenox Golds seem to stay sharp longer by far.

I absolutely LOVE them! Super Kudos for the recommendation in your previous video. I just subscribed to your channel as well. Oh and I’m #247 on the AVAIR , I opted for milled scales.

HaHa thanks, appreciate it. Life is short, be prepared, try not to waste others time, and make people laugh. Some key things in life people should adapt to. 👍🏽

Thank you

@lmme-420 hahaha As much as I do like Toyotas. I couldn't give up my GMs. As long as it's not a Ford, I'm sure we'll both be able to make it to our destination, both on & off road haha. Thanks for the sub!

Yes, this will take the utility replacement blades (that has the 2 slots on the top to lock in) that the majority of the Utility knives take.

@coreysuttles1362 I have herd of the SOR Tactical Gear Bags a couple times but I personally have no experience with them. I might have to look into trying one out to see how it holds up. Thanks for the Sub and I'll be having another Video out hopefully this week of my "Extended EDC Truck Bag" !

Thank You!

HaHa ehh I was trying something out for fun. But if people rather have a short and quick intro that works for me. Thanks for the feed back!

Sorry, I see my response did not post for some reason the other day. But are you referring to the recovery & maintenance on the truck?

Yes, I would love to see your approach to both. I have my rig set up pretty good, but it’s always good to check out what other folks do, I have learned a few things by watching others loadouts. Thanks😎👍

@Roninforged Awesome! Yeah I'll make sure to get a rundown on the truck & stuff I have with me at all times. But it's gonna have to be once it gets a little bit warmer haha. -5° is not fun to be in longer than 10 mins if you don't have to be. But I agree I like to see what others have in different parts of the US and how they use gear differently.

@@_DJ708 Roger that brother, I know the feeling, as I am living in Alaska!😎👍 Recovery and maintenance stuff ip here is a must have. Looking forward to seeing your future videos, stay safe and be well🇺🇸

@Roninforged Alaska huh, would love to make a road trip up there some time to see the Northern Lights. I guess our cold days down here are nothing like some of the cold days you guys probably get. Would be interested to see your load out as well on the truck since I'm sure it would be a lot different than mine just based off of Geography Location.

Thank You, I appreciate it. I feel like if I'm gonna work hard for my money, I want to make sure I'm spending it (mostly) on items that have multi use. 1) Could use to get home in a Grid Down Situation. And 2) More importantly it's stuff that can be used throughout the year and not just sit taking up useful space in your vehicle.

Thanks! And that's a good call. I'll make sure to drop it into a little bag. ** Knock on wood so far I haven't had any problems with it. But better to be safe than sorry. 👍🏽

@@_DJ708 awesome video! Look forward to more

You are correct, and I do have 2 others in my truck that are out of the package and ready to go. The only reason I left this one in the package is to keep it clean ( and sterile ) because it's in a pocket that has tools and a knife that I use for many things. But thats a good eye. 👍🏽

Thanks! Glad you enjoyed it!

HaHaHa. I'll keep it in mind but as of right now I'm probably gonna hold onto it.

@lelandphill4408 No I have not found a situation yet where the finish was to slick. I use this 7 days a week, wearing gloves, and bare handed. In the rain, in the snow, and when it's 100°. I do have to say the Black finish looks super nice! And I'd probably would of got one. At the time I ordered mine the original finish was all there was available. Plus if I'm using it at night time, and for any reason I drop it I like the TI color so it stands out. Or if it falls down between something in a dark area it will be easier to find than a Black in IMO* But either way in all honesty I would say it's well worth the money. -DJ

@zoltank.7411 Thank You! And sorry I just now seen your message. The cleaning mat at 7:05 came with the set. I do not believe you can buy it separately unless you find someone who is reselling the one they got with the kit.

@IShaderI I also carry an EDC knife daily as well. The Ti-Rant is my work EDC, and I would have no problem using this Razor as my Daily EDC as well. Correct, the only cleaning I would do is wipe it down, and a couple of times I used goo-gone to clean off any build up of glue & tape where the blade goes in at. I have not used any lube, and this being the first time I ever took it apart, I inspected the bearings to make sure they didn't have any build up of dust or dirt and they looked to be pretty clean still. As of right now I wouldn't recommend using any lube so it doesn't attract and hold dust. I know there's dry lubes out there that some people recommend for knives but I haven't used any yet. I would say the first week of using it, it broke in and every since the action has been extremely smooth and fast. One handed use to open and close and never had an issue with it sticking.

@@_DJ708 Thank you for letting me know! Ordered mine sometime in June, and I think Josh mentioned on Instagram another batch is coming this week. Can't wait to get mine!

​@IShaderI Awesome! I'm sure you'll be happy with your decision. And like I said in the video, I would recommend the Lenox Gold Blades. So far they have lasted the longest (stayed sharp). You can follow me on IG and let me know what you think about it after you get it.

I have 3 ...😂...why ?🤷.... because I love quality !

@giorgosbatzakis135 To be honest, I have not tried to sharpen a convex grid on here. If I had to guess from what little experience I have sharpening a convex edge, you have to rock the knife along with the sharpening stone or use a belt so you don't get a flat grind on it. Now, someone who is better than myself might know how to do it on here? But I would say it would take some playing around to see if it is even possible. If I can find a convex blade sitting around, I will give it a try and let you know.

Sorry I just now seen hour question. But yes it does come with one.

I never used the original one to be able to comment on it. Since this video I have been very busy with work and have not had free time to get back to use it. But I do have about 4 knives lined up to put some use on this sharpener and see how I like it to give a better review with my opinion on it. I will put it up next to the other sharpener I have also. But from the two knives I did sharpen off it I personally didn't have any issues with the clamping system.

@@_DJ708 Specifically try some regular bladed Spydercos where the blade gets smaller from top to bottom, and also from the back to the tip. The KME knife clamp adjusts both ways for this. But the KME system has other problems. The clamp is not one of them.

@Bob Dayton Thanks, I do believe I have a spyderco sitting around. I will make sure to try in it and see how it holds. I can see what you mean by where it tappers down it might not have a solid grip on the knife and could cause it to wiggle.

Thanks Buddy!! Appreciate it!

Some words are tricky i swear lol

I definitely like the character it gives it now. When I let someone see / uses it and they look closely and admire it, after I tell them the cost of it I follow up with how I ran it over with a forklift multiple times. They normally don't believe me till I show them the video haha. I'm still using the original clip and its still holding up great! No problems and never falls out of my pocket. This pen is 100% worth the money in my opinion if you use a pen daily.

Sorry buddy just seen this. In what pen? The copper one or the Titanium one?

@@_DJ708 in both i'm always looking for good refills to try

Hey Simone I'll post a picture on my IG of the end cap for ya. My IG name is @D.J.708

The pen writes amazing and is durable. What would you like to know about it? I'll be happy to make a better indebted review.

@@_DJ708 I own one as well. Great pen. Great video. I'm just surprised no one else has reviewed it yet since it's such a popular pen. Good luck to you sir.

@@mayanalien Thanks, yeah I was surprised as well after I bought my first one and never seen a review on them. People need to know how awesome these pens are and I figured why not show them how durable they are too. My next thing I plan on doing is gonna be anodizing it and seeing how it'l turns out.

@@_DJ708 have you figured out how to take it apart yet?

@@zacp6339 Yes it's very simple and clean design he came up with to take it apart. Not hard at all.