Video

Love it! Just the info I was looking for as I have 2 different rooms with computers and sets of MIDI instruments that I wanted to be able to access from either DAW. I may have to watch parts of this a couple more times. Thanks man! Nice rig!

No graphic card is the way to go with this case.

Non-normalled better for fx to avoid feedback?

Lucky indeed! Sounds Good.

your orange case needs some IME modules!

I went through the exact same problem connecting the Drum modules to the Drum Sequencer.

So many toys :D

Since I ended up on your video, searching an Eurorack module to make some “808s” bassdrum/basses for Trap Music, to be sampled and then played on an MPC (I’m searching also, some modules for Snare, Cap, Hi Hats and Cowbells) so that I can CRAFT some tailor maded drums, for my beats. You will suggest me this one for the 808s or something else? (I had JoMoX Modbase back in my Eurorack days, but I made some techno with it…another idea could be, SSF UltraKick, Befaco Kickall, or I don’t know…plenty of Bassdrum modules out there…I’m going crazy trying to find the right module whitout having my hands on it)

Hi very helpful video -quick question before I buy a I-connectivity device . I only have Synthstrom deluge and access virus and old Roland jv1010 module both virus and jv1010 are 16 part multi timbral I want to use deluge to sequence Access virus and jv1010 would it be possible to use the ivonnectivity to give me for example 8 parts virus and 8 parts Roland jv1010 on my deluges 16 midi channels rather than the current choice I have of either all 16 virus or all 16 being Roland jv1010 - hope this makes sense

After watching all the comparison videos I could, it seems as if moog were able to match most of the modulation and filter effects but the drive is completely different. I would probably drive the signal with a completely different plugin to get close. Little radiator or the new ChromaGlow in logic would have a better drive sound. I’ll check back when I’ve tried it but obviously the original units drive circuit has interplay with the sound that would be lacking in this example. Keep the originals of course. They will go up in price unless moog do an amazing reissue. 😊

Would you still buy the a77h today or something different in the same price range?

I wish I could fly you to my home town in Australia and help me with my matrix of a setup.

As a longtime owner of the hardware Moogerfoogers, the software is close… but you’re never going to get the same color you get as you do when you overdrive the hardware.

Hi mate. With the MioXL can I have multiple sequencers controlling my synths? Currently have DAW, Hapax, SL, even an Atari ST. Depending on mood I want to use a different sequencer. Would the MioXL allow for this?

Love you build ! And musics choices I made one too if you are passionate about the case ;) czcams.com/video/2Hg7HZ28dwE/video.htmlsi=W56Gat7y2VbTg6cJ😊

I wonder how you manage your midi clock distribution through your giga-setup.

Very impressive setup you have there. I just got a patch bay yesterday just for my guitar pedals in a home studio. Most of my pedals are stereo except for one (Chase Bliss Pre Amp MK2) others are stereo but one has a TRS input and a right and left out, another has left and right in and out. Then I have a couple Chase Bliss pedals (Mood MK2, Habit) that just have TRS in and out. I was hoping to get some advice on what type of cables to run from the pedals and into the patch bay. For instance the Hologram Microcosm has a TRS in and left and right out. Should I break the TRS input with an insert cable so I have a left and right going in? Also the Pre Amp MK2, should I just use a TRS cable in and out or do I use a TS cable. Thanks in advance and thank you for the tour of your studio.

💕💕💕

This is a very helpful video. Thanks! Does each Mio port provide 16 unique MIDI channels to individual devices or are you limited to 16 total MIDI channels? Example: is it possible to have two devices set to MIDI channel 4 without conflicting as long as they are on different Mio ports?

"...there's a spreadsheet involved..." SECRETS REVEALED! And here I thought you just kept all that in your head. :D

I really like those stands - seen them for the first time. However, I did not find any information with regard to the ADJ-1 only ADJ-2... so, are the ADJ-2 the bigger/stronger ones? Here in Germany, I did not see any offer for ADJ-1 at all, only the ADJ-2. Any thoughts?

Software is junk. Sorry, … virtual junk

I really like the jam at the end!

I’m trying to collect the pedals. Only have low pass. Got all software as released. Love it

This is fantastic, thanks much! Are you running dry recording tracks out of your DAW to the patchbay as an effects send/loop? If so, would love to see it or get any tips. Thanks again, great setup

Ummmm.... I'd take them all.

how do you like the tascam mixer? im still rocking a zed10 fx wondering if id notice an upgrade having faders and al

Bro's suit is on point

Nice studio bro!

I really like those Sound Anchor stands. Tough price to swallow, but nice. I have the previous A77Xs and I'm using the K&M 26720 monitor stands with an 8" x 9.5" (205 x 245 mm) top plate. K&M has a newer version... the K&M 26722 with a wider top plate 11" x 12.5" (280 x 320 mm).

Can i ask roughly how much money in usd do you have in that room. I have a guess but id rather have you say. You gotta have an idea. Im retired 68 year old man, just started building my studio to more than just logic an a audio interface. Ill never be able to afford 1/4 of what you have. Im interested in patch bays. Do they sort of work like a stage snake? Or more. I just won a brand new Tascam model 12 recorder/controller/mixer for 240 bucks. Guy thought it was broken and sold it thst way. Otherwise hey go for around 600. I played in bands in the 60s through 80s then again from 20005 to 2015. In my early years i ha my black faced dual showman with mu les paul gold top, and a cry baby wah wah, that was my rig for years. I wish i had all this when it was the 60s and 70s,

Super cool setup. I was hoping to hear you play through some of your pedals.

Great video, with a real musical example.

Thanks for this - any issues using the case cover with the tall Knurlies screws?

Incredible and impeccable setup. This is where having OCD is a very good trait. You must have all of this written out for lack of confusion? Then again, I wouldn't be surprised if you've memorized your patchbay setup.

what are these wonderful orange industrial tables on wheels ? all the best =))

i'm looking into ADJ-1 vs ADJ-2 for some ATC 25As.. they are a bit heavier and 'deeper' than the A77s... do you have any sense as to whether i could get away with ADJ-1? according to sound anchor's site i should technically go with the ADJ-2 but i'm wondering how much of a difference that will make

Do you know if i can use es-5 as a 8 channel input expander for my es-9 ? I can't find this information anywere !

Great video. Nice to see a bigger studio setup with multiple mios and everything running with a DAW or without. Works great in multiple room studios as well. You did a great job explaining the routing side of things. I was hoping for a little DAWless jam with the pyramid. Maybe next video?

What did you use for arms to hold the synths to the unistrut on the wall?

I love that you can jam with the MIDI devices without your DAW. Super convenient, I bet!

Ya prolly need someone to live in that room full time for security n shit....lotta valuable stuff n all....I guess I'll do it. Oh and I forgot, my qualifications are: Nobody has ever seen me and Batman in the same room...just sayin.

Does the dsp sound calibration store into the monitor or is it dependent on the computer & its software for recall?

Great setup

Wow nice thought out studio. Love the orange cases. I used to also use a XP50 to sequence everything. Used to love that way of working in the 90’s.

Comparisons seem a bit pointless unless they're in some sort of context. I dont really care if they sound the same as long as the end result is good. I found the VST 101 demo quite unpleasant to listen to though. Sold my 101 recently and would like to replace it at some point, kinda regretting it now. Would be great if the software could generate similar feels but doesn't seem like it can.

Nicely done! Stoked to see it full and making some music!

It worth to run all the calibrations processes after the board was installed. Mine had issues with the pitch bender (sounded like the unit was out of tune) after I installed the expansion board. A fresh calibration resolved it.

bonjour. what a cool done-goodbye-

thanks for sharing your build process. i love the design of the befaco stuff