Video

Did you ever get the riffle to shoot better. I don't see any more videos about this riffle project.

Thank you! Finally somebody explained it correctly.... the adj knob turned CCW (left) opens the gas VENTING port to bleed off more gas from the piston for less operating pressure. Turning the knob CW (right) closes the gas pressure venting port to the atmosphere and lets more or all the barrel gas pressure operate the piston.

AS others have said, the screws are metric and use metric wrenches

The build will only be acceptable once you get the Happy Patch

The M is the Finnish Border Guards-Sisis’ Patrol sack. The ‘suck’ shoulder straps are For shouldering weapons without interfering. Given they go out in often cold conditions In heavier clothing, and keep loads to 30 L The system works.

Solid pack

Haga sucks and is a thief 😂

I had one of these. Sold it for something larger. Actual capacity was too small for what I needed it to be but it's built too heavy (if that makes sense) for using it as a real daypack. The suspension isn't good enough for carrying real weight either. Rather go up to a true frame. My final recommendation is stop strapping shit to the outside and buy a bag around 20L, 40L, and 60L+ with the latter two having a real frame of some kind.

located in Eastern NC as well. Good afternoon neighbor!

Good job , sold mine and went smaller !! And yes the straps do suck , changed mine out to some old ALICE LC2 straps I had from WAYYYYYY back in the day. So JMHO the bigger the pack ,the more crap you gonna fill it with, it's just human nature , best to pack whatever you "think" you need and then hit the trail. Not the yard or the living room, I mean trail. Nature will take it's course and you will either get really good at rucking a heavy load , or your pack will get lighter. Cheers !! New sub, and also in the same A.O.

Nice pack!

do you have vid of pillars

Im an idiot I ordered the non xl

So 3 years on....hows it? I justpicked one up seeing as the commies up here in canada are plotting for another gun ban im sure.

🤷‍♂ I have the RDB Defender with factory aluminum M-LOK handguard, and really can't find a single issue to complain about. Not sure why the hate.

You'd be much better off taking your caps off. You'll have a bigger sight picture. Clear caps dont do anything to keep your optic clear.

I’ve owned my RDB since 2018 and I was neglecting my AR’s so I took them out a couple times just to miss my RDB. as long as you know about the gas system adjustments, this gun is fun and reliable. I’ve outfitted my RDB with the pad for cheek rest, Kel-tec forend, magwell extended well, qb mount on forend, Haga Defense butt stock and a small vertical grip. I had the primary arms acss etched radical optic with a three times magnifier behind it, but with the length of pull it was not ideal for I relief and I went back to a hollow Sun solar, powered red dot.

I want the stickers😅

glad I found this video, I have the regular Bravo mount and was about to order the 515, which won't fit. I'd have been rather upset tbh. Thank you sir! Also, fellow NC'er here

Does the stock come ambitious for a Lefty bolt?..could you show other side of stock...pretty please...haha

Great show 👍👍👍👍👍

Hello what is a good scope Mount for the rifle

At 5min in you couldn't get the magazine seated. I had the same problem. I thought i broke mine but once you pull the charging handle it resets something in there and is able to grab onto the magazine again

Perfect tutorial 👍 thanks

Got my RDB 17 zeroed it, trust it. Now qualified with it. She rides with me & my sidearm at work patrolling high risk properties & establishments. Thanks for all the info & advise. Keep on running & gunning “Brother at Arms” Long before us Long after us Battlefield Eternal

Wow I'm amazed now I think you done a really good job.

Really needed a heatshield in there

Lucky Irishman handguard and a hand stop turns this gun into a whole different animal. I've got mine with a 1-10 and a bipod and its awesome

Thanks for the video . I've always had great results with Savage guns , probably the best shooting guns for the money . I appreciate that you make videos without sponsorship and getting free stuff from companies . You're definitely not a shill for any brand .

Just my opinion . But I'd leave the polishing compound on the bolt and run it through the receiver several times to lap the guide rails a bit . I read the book 93 Kills about USMC Scout/Sniper Carlos Hathcock . He used lapping compound to slick up the bolt and action of his bolt action rifles to butter smoothness . I've done the same on every bolt action rifles I've ever owned .

I got a model 111 trophy hunter XP in 7mm rem mag with a vortex scope, my grandpas sling he gave to me and my ammo sleeve on the stock it’s amazing and reliable, accurate

So you’re saying the gas isn’t tuned by default. I’ll guess I’ll have to crack the manual or look out for tubes. I’ll rip mine apart and lube it. Should have it today or Sat.

Amen brutha just shoot the damn thing I love my Kel TEC RDB amazing shooter and 20 inch barrel 556 sweet spot

I live in California I have the Kel TEC RDB C and you are right it is an addictive rifle to shoot it has become my favorite and no problems at all

How did it turn out? Didn't see a follow up video.

Try some 30 and 40gr. bullets to see where the setting is. Thank you

I have a 17" RDB on the way. Wanted the mid-weight barrel without getting too long. Plan on putting a Lucky Irishman rail and Sig Sauer LPVO on it. I've had some shoulder (rotator cuff) issues and I'm hoping this works well with them. I tend to like SBRs.

Use safety flag instead of finger to test for round in chamber. There are + and - marks on picatinny rail. Roll nob toward + allows more gas to get to piston, roll nob toward - reduces gas to piston. I found setting gas with the lightest ball m193 at 55 grains works best. If you adjust with 77 grain ball, you will under gas the piston for lighter loads. Once you find the load that gives you the best group and can get reliably you can reset the gas for that ammo to give you reliable cycling with the softest recoil.

You're the first channel I've seen that does closeups like this. I really appreciated being able to see up close, even if the camera was focus breathing a bit. (A quick fix to that is when to put your whole palm behind the part you're wanting to highlight. That gives the camera's focus sensor something [bigger] to lock onto.) Also thank you for the non-crotch shot! 🤣 PS: I saw in another comment you're a fabricator and designer by profession. A thought [that you likely have had]: with your specialized knowledge, detailed shots, and love of guns, you could find a niche in CZcams and make a living off just videos. I mean kids review MAKEUP and make $10k a month! Like I said: I'm not familiar with anyone else doing detailed videos like this. And even if so, you have a unique mix that might do *really* well. With a tripod, solid (white?) background, and a couple nice LED lights, your shots-and perhaps channel-would go to the next level.

hey man anyway i could get the link to the scope base, and rings?

I've got some ideas for some upgrade/after market parts for the rdb that I think would be pretty popular but I'm waiting to put them out there till I have a chance to try them out and see if any of said ideas hold up.

Is that supposed to be a heavy barrel on the RDB???

You may want to look into an ejection port cover. There's a really basic 3D printable one that's basically just a piece of plastic that fits into the holes on the butt stock. You can find the design with a simple google search. I bought a different ejection port cover on etsy that uses an AR ejection port cover, but I don't really recommend it. Mine was falling apart where it screws in, but I just put a ton of superglue on it to hold it together. If a bunch of mud or dirt somehow gets in through the ejection port, it can prevent the bolt from moving all the way back. Not sure what role this rifle fits for you, but it's a super easy solution to just print that 3D ejection port cover if you were interested. edit: I guess you wouldn't be able to put the cover on your butt stock actually, unless maybe you drilled some holes in the new butt stock.. so yeah, never mind.. I mean, you probably don't need an ejection port cover anyway, I just saw torture test videos, and decided to put one on mine. No one sells the ejection port covers anymore though, you gotta make one yourself.

I had problems with my take down pins. They were either really loose and fell out, or really tight. I think I broke a little metal ring on some that retains the pin. Either way, I just replaced them with screws and wing nuts from the hardware store.

What is the price of a Savage Model 110 Cal 7mm Rem Mag with mussels brake built in the barrel

Great vedio, when it gets cold outside you need to get rid of the grease. It may lock everything up.

Got the RFB now just saving up for the RDB. Deciding which barrel length should I get, 16,17 or 20 inch bbl?

Just picked one up. I can't believe I waited this long to get one!

I remember your first video on the RDB when I was researching whether or not to get it, but I got it, and now I'm watching this video to reaffirm my love for this gun. It's good to see innovation

I love my RDB and my KSG, I'd like to get and RFB but I've never seen one at a gun store and I rarely see them onlone