Video

Being genuine here. Get a new hair style 🙏

Thank you, thank you, thank you! This video helped tremendously. Saved me another 3 hours trying to find the solution on the internet for my Canon printer and T-mobile home internet to work together.

if it goes on for 1-2 days is it that same cause? or something else?

I moved into an apartment, and one of the window track shoes was not attached. This video helped me fix it 👍

Hi, thanks for the video. Question: I used to work in the apartment industry for many years. I’ve been out of the industry for over a decade and I mainly worked on traditional ac units and furnaces. My wife and I purchased a new home in 2017. In that time I’ve had to replace at least all three of my zoned damper motors. Those Honeywell motors are not long term. But my question is: I have one of those Honeywell whole ventilation units on our unit. It’s set to on. I’ve never messed with it. I was under the impression that when the unit is calling for cool or heat it’s sucking in air from the outside like you stated and pressurizes the home. But looking at its damper it’s not closing in what I would expect a reasonable time after shutting off letting cool out. I’m assuming it should close all the way and the zoned dampers open when none of the floors are calling for air. My question is: could the vent damper not working or does it have a certain amount of delay after satisfying the thermostat(s) so it closes? It’s also not fully set on the thumb switch which adjusts flow. It’s one or two. We live in Atlanta so you know we get our fair share of heat. Thanks. Edit: just for clarification my system is a heat pump. So I’m just making sure I’m not messing something up by shutting it off or affecting how it purges.

Lol, moved and lived 2nd floor for a year and not noticed the shaking until today. I’m glad this vidoe explains why i feel the shaking my my room.

We made no progress bro

Great video it took some fiddling with the old Canon MG5520 printer settings BUT your instructions got me going RESULTS the USB C to Printer cable was not a waste of money PLUS for the 1st time ever my wife printed from her iPhone !!

Just a small recommendation… put a rag or something over the drain. Any dropped screws will be lost down the drain without something blocking it. Great video. I had the opposite problem. I only had warm to scalding hot, no cold.

These are like the olden days where they had windows that tilted above a door way.

Is it bad to take them off?

The problem I’m still having is when the water transitions from hot to cold or vice versa that middle section is still full blast. As well as, the pipes grunting and sputtering at me for a few seconds as it goes to hot Anyway, it’s still better than before so i appreciate the video either way

Thank you, I didn't know where to turn to get my printer working, so my last option was UTUBE. Of all the issues I've been having connecting devices, you can't go wrong by following the professionals in UTUBE. KUDOS.

You are the man. It was a simple change but so useful.

Hello Mr. BJ, my problem is whenever I turn on the AC cuz it's hot summer now, I haven't tried heat, so now I turn on the AC, I heard the dripping sound in the wall like yours, once I turn off the AC, the dripping sound will slowly disappear , which is really like water dripping. In order to make sure my problem is the one you shared, would you please share your contact information with me so I can send you the video of my dripping or schedule an appointment to check it onsite if it's necessary? Thank you so much!

Thank you so much! I was worried I'd need to get a new printer but this worked quickly and got mine up and running in minutes.

How much is a new one?

So I had this same issue with my Samsung TV I had to split the wifi so now my printer is the issue so do I have to go to my internet T mobile and make a 3rd network? It's so strange my phones run off the original TV runs 2nd network so for my canon printer split again? But what number mhz?

So much for spraying it with a solvent stinking catalyst Great idea! We're going to cut it off brass plug. Goodbye. Thanks

I Unscrew the ceramic lock nut. What can I do.. cannot get shade off

Great video easy fix

Thank you!! Thank you!! Thank you!!!

Do moen positemp cartridges have a generic or off brand replacement? Also just an FYI I have a single family home (in Oregon) where the where shutoff is at the front of the property where the city shut off is.

I know it's been a year, but can a cartridge be initially installed just a tiny bit off? Or does the faucet equipment dictate that 2 and 7 are right? Seems like our facets aren't at 6, more at 5.5 when off.

Thank you so much! It worked.

The previous homeowner (fellow DIYer) had done the bathroom remodel themselves and tiled over the faceplate on the mixer valve. A simple fix became a bit more complicated when I had to start cutting tile. I removed just enough tile to wiggle the old plate out and then opted to use the new one that came with the new part. Smaller and easier to install with less fuss. I spent $100 on parts because my local Ace hardware was the only store with both components in stock that was open on a Sunday. Looks like it would have been closer to $75 at Lowes, Home depot, or Amazon but all of those options would have taken a few days. Nothing like a same day fix thank you for the clear and straight forward video!

Thank you so much!!! This is exactly what I needed!

I may have just smoked one of these with my lawnmower and need to know what it’s called for a replacement cap…

exactly what I was looking for!

Thank you, just saved my sanity for ths second time. A year ago this video helped me set up printer to Tmobile internet. Two days ago my printer lost connection. I spent too much time with no success. Luckily I remembered this video. Rewatched it, the tmobile security level had gone back to their default. Quick fix.

THANK YOU SO MUCH

Our Irish electricity is 230 volts, while USA is 100. So for safety there are no electrical outlets in bathrooms (save for 2 pin shaving sockets) and bathroom light switches are outside the bathroom. Sockets usually have on/off switches and plugs have a third earth pin.

I believe those are most likely Heat Pumps as opposed to Air Con Units.... Plug sockets in UK/Irish houses are pretty rare. I've done most of Ireland and plan to retire there but never made it around to Kerry/Clare/Mayo, you're blessed to have visited, it's a truly beautiful country with wonderful people, some of the very best.

Oh wow! Thank you so much! About ready to rip my hair out! Thank you so much😊

I used this 2 years ago when we switched to T-mobile Internet. Because my son was a T-mobile employee our account was under him. We set up our own account 2 weeks ago, reset the modem and since then the HP printer wont work. I created a new network, the printer sees it, the network sees it but no joy. I know im missing something but what? Help!

Is there a way to tight it up? The new T3 lightbulb I got has just a minimal difference (like 1mm) from the old one but because of that is not making contact, any suggestion?

Dingle is a lovely place, unfortunately in Ireland house prices have become not affordable to normal folks these days. In my home town a 3-bedroom semi-detached house might sell for 420000 Euros but with average salary's of 45K they have no chance of ever being able to afford to get a mortgage to buy one.

Does this affect your electricity bill by having the fan running 24/7?

Thank you!! This hack worked!!

OMG - I am not computer savvy that much. My son tried to help me with this. I got T-Mobile to try to help me. I worked on this several times with my Epson printer and was able to print but all of a sudden the last several weeks to a month or two I haven’t been able to print. After watching your video, I did exactly what you said. I am not sure that I got everything exactly right but finally after sitting in here for about two hours my printer is working. I have the split network set up on my T-Mobile like you explained. I just want to say thank you, thank you, thank you so much!!! I can finally print!!! ❤😊

OMG!!! You are a saving grace!!! T-mobile tech support did not give me all the steps to complete the printer set-up. You may not be a tech professional but you sure gave us the key to fixing this issue. THANK YOU SO MUCH!!! You are a LIFESAVER!!!!!

That is exactly what it was! Thank you

Had one break years ago, bounced off the part of my car that runs along the back windshield took a chunk out of a cinder block dent in my garage door dented one of the drawers on the other side of my car on my toolbox, did more damage to the car on a driver side saw the ripples in the body from the spring and they sent it to the body shop and repainted the whole car, which was fine by me

Sixteen minutes? Really?

Ok but could you actually provide a solution to stop the noise.

Ahhhh thank you so much! I was in tears trying to figure this out before finding your video!

How do these vents impact fire safety? I was told to sleep with bedroom doors closed in case of fire. Won't the fire and smoke just come on inside the room through the vents above the doors?

Thank you..

Thank you! You made something that seemed complicated straightforward & I didn’t have to pay a plumber. Thank you again for sharing your knowledge!

Thank you!!!! Been fighting my printer for a couple months……now all is well!