Video

My fakes have the same box as the real one you have, just not the foam and they have the pouch as well. The box looks so, similar it would take close expectation to tell the difference outside of the foam but the foam is removable in the real ones. On some of them they put their own product code sticker on it and that will give it away.

Lol I think I have the gun 😂

I absolutely can not get the upper onto the lower because the plate attached to the springs on the bolt assembly won’t stay lined up to upper receiver to l slide into the upper reciever when it’s going into the lower

Thank you for taking the trouble of posting.

Thank you, this has been driving me nuts to figure out

Maybe you can use those primer+glue all in one type so you don’t have to worry about the inside sleeve area that can’t be primed? That’s my only solution. Like Oatey Fusion or Christy Hot glue which has primer in it as well

Thank You for the video. Just had to take one of mine apart because the mast was stuck up and I hit it with the lawnmower. Luckily I had a spare head to replace it. Thanks again

You should of had everything ready to assemble. And maybe stay focused on the table instead of going out of view when assembling

You seem to have easily removed the bonnet but mine seems stuck. Can one use a wrench to take it out?

Thank you!!!!!

I'll never understand why none of these sprinkler dudes that made videos for this sprinkler system talked about HOW TO SELECT AND USE JUST ONE PROGRAM my god it's frustrating. This system has an A, B, C and D and it insists on using them all and it takes a damn MIT professor to be able to stop it and in none of these videos do any of these guys address it. They all just say "select A and turn it to auto run" uhhh yeah, that shit ain't working big guy

As someone who started a maintenance job last year with no power tools, only a found screwdriver, hammer, and slip joints, it is amazing to finally own power tools. You just saved that guy's life. lol

k

Hey man I have a question about one inch poly pipe repairs- how hard do you compress the ear clamps? Do you try to completely compress it? Thanks

boss my question aku

Why do you like the oetiker crimpers so much?

Been looking for this! Thanks for sharing 🤙🏽🤙🏽

Why do you idiot people always want to put videos on you tube, When you don't have the slightest idea of what your doing. Poorly prepared as for tools. Piss poor camera work Complete lack of firearm repairing Total waste of time You need to quit making these lousy Worthless videos.

I just replaced all the removable parts on a valve the wasn't opening. I had taken it apart and cleaned the pin holes and that worked for 1 day so i bought a new valve, After hand tightening the lock ring i had a big leak, the new ring below the diaphram didn't fit as snuggly so i switched in the old one, that cut the leak to a trickle but still leaking, Do you think i just need a slight turn on the lock cap? The valve is in a real bad spot. i don't have room to use your wrench and I'm hesitant to use channel locks from above,

What is the difference between the programs?

Do you know where I can get parts? The store I used to get my parts have been out of stock for months.

Very, very helpful. Thank you!

Hello, How do I shut off the additional run times? Thanks👍🏻

Why does the sprinklers come on out of nowhere? How do you reset the manual setup?

I have one of these and want one of my stations to water every day. If I see CAL on the display and all the days, do I then have to select each day? Or if I see all the days of the week displayed, am I good to go? Thanks.

How to set it to come on automatic

Where can i find the kit

Or buy thr right parts...well contractor here what in the actual hillbilly bullshit is this. Drilled for a few different companies over 12 years and ive never seen this. Gtfo

Bro thought he thunk of somethin

What part of the country you guys in here in eastern Nebraska we use that black poly pipe too . Ive seen south people run everything in pvc .its interesting to see how construction is thru our big ahh country. Literally regions away

Day select: when I press the NEXT button to advance day, dust played day- WED- doesn’t advance. What do I do?

Has anyone had issues with the bleed screw leaking? How did you fix it?

Good work 🐾

Thank You, Exactly what I needed to see!!! Thanks Again!

Thanks brother you save me time and money

Just replaced 2500T solenoid valve and doesn't come on with system but will manually but comes on in the 'off' position. I have direction flow coming from house. Any idea what problem is? Thanks

This is painful, I'm screaming at my phone you forgot the 7th screw, and you never even got the brushes out. This dude is a total clown 🤡

Interesting

I have the same system but mine even that only has 1 time mode 2 days a week it was working fine before but now is turn in on every night even that it said 2 days a week

Thank you for this!!

Question, The tool you used to remove the cover of the valve would be helpful ? Thank you!

I love this, thank you. As a newly certified irrigation and backflow tech.. I appreciate this so much ❤

THANK YOU SOOO MUCH!

👍👍

I have an irritrol and a rainbird Valve, rb controls sprinkler and my drip won't turn off. My irritrol has screws doesn't just pop off like that it's seemingly glued. How do I open thing thing?

thanks for the vid. took mine apart, cleaned it, petroleum jelly on rubbers......boom......she workin

Thank you. I need this easy and straight to the point

system runing 2 time can't figure out how to change it.

Does the plastic base come out too?

Not sure who is the bigger idiot? This guy for recording a 19 minute video of his magnetic tray? Or…..me for watching it? WHAT A WASTE!