Video

Can I use these tracks for outdoor shed ?

There's a lot of variables when it comes to Tile and grout. You learn as you go haha

I am definitely going to go and get some! I had rubber gloves on and somewhere along the line ripped a great big hole in the one finger which is now dark brown. My mother told me that my grandfather used to use turpentine on all of their cuts and boo-boos. So when I grew up she used Macura con Well the phone can’t spell it and I can only guess lol but she used it on us and it stunk like crazy. But I’ve heard turpentine does really well on a cut and now that I know I will get it to clean my hands

I suspect that because you used a pressure treated 4x4 the insecticide in the wood killed them and they died elsewhere or it just repelled them! Im going to try it with non pressure treated wood and see if that makes a difference!

Dark walnut looked like light walnut!

Look at the size of your wall . - The advice is relative to the size of your surface area. I would have thought that would be common sense! 1.7 X3 SQM is not the same as 15 SQM. X3 is it. ?

Does it shake?

I'm going to do this in my cottage. Thank you for walking through the steps :)

I went to your other video link and they were totally different lights. I was commenting about this video that I didn't see how you daisy chained the lights up in the ceiling, so I went to the link thinking that you would show it in the other video, but I still didn't see what I was looking for being that they were totally different lights. In the linked video I saw that there were 3 easy disconnects, but if you are jumping to another light, where are you supposed to connect the other wiring?

Please come do mine. I'll make dinner

My mirror is huge and is secured with some kind of plastic clips. How can I work around this problem?

No, for every 1 things he's right about, he's wrong about 99. He's a friggin joke and hack of a contractor/diy influencer.

Grear job. It might look chic if you painted the frame black.

It can also help certain plastics and rubber deteriorate faster. It can damage eyes and cells in the lungs, but that's usually in extreme cases. Airing out the room is always a smart idea. If you have central heat or AC, don't put it right next to the return

Couldn’t watch, music was too annoying and there was no narration.

Back in the 2000s I woked in a hotel. when we Started getting rid of Smoking rooms, we used ozone generators. I thought they quite well. Wasn't a fan of the odd electrical smell when in operation. When finished, the odor faded quickly.

An ozone generator has been so handy for us! Got smoke smell out of our clothes and things and just used it to clear out the musty smell from a used car.

Dreamline does not instruct/recommend , or warranty their pans if screwed to the studs. other pans may but not dreamline, just set in mortar base and let cure before proceeding

Is it heat resistant paint?

I have never grouted before. Not once. I just finished my kitchen floor last night and used the FA. It went so smoothly. The one mistake i think a lot of people are making is using a drill to mix and going TOO FAST. 350RPM MAX super slow. Mixing for just under 5 minutes with the correct amount of water turns this to runny peanut butter and it's PERFECT. Waited about 20 minutes to sponge and buff, and it turned out pretty good

You can put the threshold guide on last it makes getting the doors in much more easily

If she don't like the jacket - maybe she shouldn't wear it? What? Don't like that rug runner either? Good content. Helps me with my work on a 1969 double wide trailer. Thank you.

LOL.. why would you replace one linear foot of tubing? Just cut out that foot of tubing and join up the parts that are still good! You wasted money buying tubing if that's all you did. Also, I just bought a connection with 5/16" - 1/4", made by John Guest, but doesn't require a little locking ring to keep it in. Home depot had it for $10.00 Canadian instead of paying for a whirlpool part $34.00+. Another place wanted $57.00 and had to order it. I read, you should change your tubing throughout the water system in your fridge water dispenser and freezer ice cube maker every 3-5 years. No way Im doing that! LOL... They recommend getting it cleaned out with vinegar also... by someone who knows how! I have no idea how they would pump vinegar through the system. (to clear out Mold) The reason for changing the tubing is that the tubing dries out and cracks... so, you are probably in for some more cracks! Unless you backed your fridge up and pinched the tube??? I tape my tubing up onto the back of the fridge, up off the floor! I also had slow water from my dispenser. Found out over the last week of searching videos that it is actually because the builders of our house, Minto, put in a saddle valve on the water pipe to run a tube from, to the fridge... the water can't get through fast enough to dispense the water well. We thought it was normal...for 23 years.. LOL... just figured it out now! It was taking 45 seconds to fill a 12 ounce glass... OMG... Then I googled how long it should take and it should take about 8-10 seconds. Wayyyy faster! So, gonna change that ... maybe I'll make a video and post it! Maybe... Hope this helps others, Cheers..

Will legs support just as is if I make this 10ft long

Best video I’ve seen of this…. Thank youuuu

I have watched several videos on how to install a shower base and they it’s very important to put some paper like felt or thick plastic on the board before you put down 5he cement otherwise the concrete will rot the wood.

Or buy one and avoid all the leg work and psychical work for 50 bucks. The wheels you used alone were almost 25 a piece.

One wheel is over $20 fittings are 2-5 a piece. Fucking click bait. Imma still watch it tho even tho it’s gonna be over 90 bucks

The added poly across the front is a good idea. However, I recommend 6-mil. The 2-mil that you appeared can easily become damaged. Thank you for the video.

I’m 3 coats in and it still looks streaky and not consistent. Also how in the world did you get the soap tray and other things like that painted so cleanly? Did you use a sprayer for those?

at minute 7:20 there should be a pic of the gap in the slot where the wheel easily slips into the track. If you try to install and don't get the wheel in at the location where there is a gap, it WILL NOT GO IN. Took a while to figure that out.

Outside With Mike did this very project 3 years ago as well.

This is really zeroscaping, not xeriscaping. Xeriscaping should contain drought tolerant plants, at best no less than plants in a traditional garden. This gravel-on-weed-fabric antipattern doesn't work for long, since dirt and seeds accumulate in the gravel. Especially if the climate isn't really dry desert. People do this in humid parts of Europe, in Germany or even UK, in hope to get rid of garden maintenance, and cheaper than paving all over. But it doesn't work, and is illegal according to many legislations.

I appreciate your video and work effort, but this is just a bandaid on a stich wound. It seems to me that all chimney crowns should have a custom fit stainless steel box cover with holes cut out for flues and fasten in place, and a high temp flexible caulk sealer around perimeter of flues.

I watch Jeffs videos purely for laughs, never took his advices seriously

Must be nice to live in Mayberry ... where nobody steals your stuff that you leave by the side of the lake. 🤔

Could you use textured paint and then repaint it silver or gold, with a gloss for even more upscale look?

Very good job and helpful video 👍. You forgot to introduce your dog 😊

Kelly, i’ve been watching your video and is that a color stain that you’re putting on the cedar boards? I like the color that it turned out to be. If you don’t mind, I just would like to know what you used because I’m getting ready to wrap my post.

Asbestos is the State Rock of California, known as Serpentine. It is common in East Bay San Francisco and El Dorado Hills east of Sacramento. It is found on fault lines. I would be most concerned driving dusty gravel roads in those areas since the white dust on your car likely has asbestos, and how many drivers wear a mask. The workers most affected were spraying asbestos in ship holds every day, with poor masks.

I need to build one but the part boat sits on I need to add elbows and other PVC to make supports go other way.... For my inflatable Colorado pontoon boat

Why would anyone want to cover a pretty golden yellow with plain old white?

Excellent man! Just the instructions I needed. Question though, what would you recommend for a kitchen sink? Again, thanks for the video!

It is amazing how good a 2x8 can look with a little bit of work.

Thank you! I just bought a house and have to regrout and this is the grout we have from the previous owner! So, now I feel good about using it.

NO! Exactly what NOT to do. No roofer will tell you to scrape the roof. It damages it. Blow off loose material and use a chemical de-moss such as zinc.

Mixing speed seems to be the big determine factor in quick drying time experiences.

I just ordered the exact same one. Can you tell me how wide the rails for the shower door are approximately . There was nothing in the PDF on the manufacturer's site for how thick that threshold is

This is definitely not a “how to” video

DO NOT mix it with a high powered mixer (on a drill) mix it by hand.