Video

@brandonaynesmay352, with an aging pool of drivers/operators, providing entry to the machine at the ground level is important. WIth MOFFETT's Remote Ground Mount Plus RGM+ system, operators can lower the machine to the ground (or store the machine on the mounting kit) while standing on the ground, and do it from a position which is less vulnerable, away from the traffic.

Hi Kereti, thanks for your inquiry. Where you can buy a pantograph-equipped MOFFETT TMF depends on which country you are in, but in the US, please call Hiab USA Inc. at 419-482-6000 and we can direct your to the correct sales person. You can also review the entire MOFFETT TMF product line on the Hiab USA Inc. website at www.hiab.com/en-us/products/truck-mounted-forklifts

I'm in australia

@user-xm2jz9rz9d do you got a link?

Luke, thanks for the question. Depending on the age of the machine, it might be possible to retrofit Remote Ground Mount. To understand if retrofitting Remote Ground Mount could make sense for your particular machine, please reach out to our service team with your machine Serial Number. Your local Hiab USA Inc. service location can be found by clicking on this link. hiab.com/en-us/dealerservice-point-map?location=37.886880383701694,-95.3742947352525&zoom=4&hiab=false&loglift=false&moffett=true&multilift=false&mobileservice=false&spareparts=false&forestryCranes=false&hookliftsAndSkiploaders=false&loaderCranes=false&truckMountedForklifts=false&hiabOffices=false&services=true

Call 800-837-2351, availability depends on your MOFFETT model.

Jeffrey, thanks for reaching out. To be sure, the MOFFETT M8 55.4P NX truck mounted forklift is rated to lift 5500 lbs @ a 24” load center. In cases where there are concerns with capacity, we first need to verify the build of the machine is configured as designed, then we’ll verify operations, as well as load details. To help work through these details, please call 844-442-2911 8-5 EST or email us at support@hiabtechline.Zendesk.com. If you’re emailing, please include your phone number so we can call you back. It would be helpful to include a few photos of your machine for review. Thanks again and kindest regards.

@@hiabusainc5582 shouldnt the mast have grease on the mast rollers because base on the video there look dry and a my work toyota always is well lubed

Same thing here..

While one can appreciate that using Remote Ground Mount will take longer to mount and dismount the machine compared to driving in/out of the mounting kit and using the levers, please consider it also takes longer to fasten our seat belts than to not fasten our seat belts. However, logic and experience have shown the time used to fasten our seat belts is well worth the time invested. In the same manner, if we can minimize operators stepping on, or off, an elevated machine during the mounting/dismounting process, we have decreased the likelihood for a lost time injury (LTI). To our credit, not only have we provided a method to mount/dismount from the transport vehicle without the need to climb on an elevated machine, we've also provided the operator the ability to the complete the process wirelessly. With Remote Ground Mount, the operator has the ability to mount and dismount the machine from a safe space, whether or not the safe space is on the left or right side of the transport vehicle. This is an advantage compared to systems which require the operator to stand and remain in close contact with the machine during the mounting/dismounting process. At the end of the day, Remote Ground Mount is a tool to minimize wear and tear on operators. Operators can still use the levers to mount the machine as a back up, or if their company policy allows it. Best Regards, Hiab USA

@@hiabusainc5582 I tried this feature out for a month and the "wireless access" loses access more than 6 feet from the driver side side panel meaning that you can only operate the wireless control from the driver side of the forklift. This means that if you park in the traditional right side of the road, the operator MUST lower the forklift while standing either in the middle of the road or behind the forklift where traffic is oncoming. The ONLY purpose for this feature is for the obese, elderly, or injured operators that can no longer climb up into the forklift to be and to access it from ground level. But until you can make the wireless connection to the forklift further than the width of the forklift, this is an unsafe and slower alternative to traditional mounting and dismounting. Three points of contact whike getting in and out. Problem solved . I stand by what I said.

The grapple on this crane is and ICM GRA-F 500 and it works great!