![JettaMan Designs](/img/default-banner.jpg)
- 127
- 127 497
JettaMan Designs
United States
Registrace 4. 02. 2021
JettaMan Designs was started to fill the gap between "Plain Jane" home built firearms and "Gucci" builds. Join us as we not only build SPECTACULAR looking firearms that function flawlessly, but we'll also be transforming NORMAL factory builds, when possible, to SHOW PIECE quality.
Building a Glock 19 Viper, The Reveal - Strike Industries - Strike 80 "Copperhead"
"Copperhead" is a Strike Industries - Strike 80 build like no other. Building a Glock 19 Viper, The Reveal has been a long time coming. If you like this type of content check out the Builders Showcase Minute playlist and please like, subscribe and hit the bell notification so you know exactly when, and possibly before, the next video drops.
Conceptualized, designed and built by RAMjetta (yours truly).
For the full Build list and unedited version go to
Website: JettaManDesigns.com
Disclaimer: This video is not sponsored in any part by any of the listed vendors and/or suppliers.
Thanks to:
Brad Gledhill of Gledhill Customs gledhillcustoms.com
Cylio Turner of Turner Gunworks
Marine Gun Builder Network
Jrow of JRow 3D Printing
@StrikeIndustriesOfficial
@olightworld
@gledhillcustoms4659
@GlockIncSmyrna
@RangerProofGear
Also connect to Ram at:
Instagram: @jettaman_designs or jettaman_designs
Rumble: rumble.com/JettaManDesigns
Freedom Forum: builderstribe.org
Get 10% off your next Olight Weapon Mounted Light with code: JMD10 at bit.ly/OlightSaleJMD
(Disclaimer: The link above is an affiliate link. If you should click the link and make a purchase, JettaMan Designs and Builders Tribe community will receive a commission based on the amount of your purchase)
All custom jewelry designed and made by Pastiche Treasures pastichetreasures.com
Copperhead pistol stand produced by JRow 3D
Conceptualized, designed and built by RAMjetta (yours truly).
For the full Build list and unedited version go to
Website: JettaManDesigns.com
Disclaimer: This video is not sponsored in any part by any of the listed vendors and/or suppliers.
Thanks to:
Brad Gledhill of Gledhill Customs gledhillcustoms.com
Cylio Turner of Turner Gunworks
Marine Gun Builder Network
Jrow of JRow 3D Printing
@StrikeIndustriesOfficial
@olightworld
@gledhillcustoms4659
@GlockIncSmyrna
@RangerProofGear
Also connect to Ram at:
Instagram: @jettaman_designs or jettaman_designs
Rumble: rumble.com/JettaManDesigns
Freedom Forum: builderstribe.org
Get 10% off your next Olight Weapon Mounted Light with code: JMD10 at bit.ly/OlightSaleJMD
(Disclaimer: The link above is an affiliate link. If you should click the link and make a purchase, JettaMan Designs and Builders Tribe community will receive a commission based on the amount of your purchase)
All custom jewelry designed and made by Pastiche Treasures pastichetreasures.com
Copperhead pistol stand produced by JRow 3D
zhlédnutí: 802
Video
Custom Glock 43 "Black Widow" Polymer80 PF9ss by Hawkeye
zhlédnutí 286Před rokem
Custom Glock 43 "Black Widow" Polymer80 PF9ss by Hawkeye
How to Change a Glock Firing Pin Spring! - Five Minute Freedom Tips with RAMjetta
zhlédnutí 10KPřed rokem
How to Change a Glock Firing Pin Spring! - Five Minute Freedom Tips with RAMjetta
How to Change a Glock Firing Pin Safety! - Five Minute Freedom Tips
zhlédnutí 3,3KPřed rokem
How to Change a Glock Firing Pin Safety! - Five Minute Freedom Tips
Building a Glock 19 Viper Part 2 - Strike Industries - Strike 80 "Copperhead"
zhlédnutí 331Před rokem
Building a Glock 19 Viper Part 2 - Strike Industries - Strike 80 "Copperhead"
Why Would I Buy The New Olight Valkyrie Turbo?!? - Olight Summer Sale 2022 - Five Minute Freedom Tip
zhlédnutí 291Před 2 lety
Why Would I Buy The New Olight Valkyrie Turbo?!? - Olight Summer Sale 2022 - Five Minute Freedom Tip
Don't miss the OLIGHT SUMMER SALE JULY 11th with the Valkyrie Turbo, Obuld Pro and Olantern Classic
zhlédnutí 59Před 2 lety
Don't miss the OLIGHT SUMMER SALE JULY 11th with the Valkyrie Turbo, Obuld Pro and Olantern Classic
Don't miss the OLIGHT FLASH SALE MAY 2022 featuring the new S2R Baton II, i5T Plus, Baldr S BL
zhlédnutí 69Před 2 lety
Don't miss the OLIGHT FLASH SALE MAY 2022 featuring the new S2R Baton II, i5T Plus, Baldr S BL
Building a Glock 19 Viper Part 1 - Strike Industries - Strike 80 "Copperhead"
zhlédnutí 762Před 2 lety
Building a Glock 19 Viper Part 1 - Strike Industries - Strike 80 "Copperhead"
Custom Glock 19 "Marie Laveau - The Voodoo Queen" Strike Industries Strike 80
zhlédnutí 445Před 2 lety
Custom Glock 19 "Marie Laveau - The Voodoo Queen" Strike Industries Strike 80
How To Polish Your Trigger Bar in 2 SIMPLE Steps - Five Minute Freedom Tips
zhlédnutí 18KPřed 2 lety
How To Polish Your Trigger Bar in 2 SIMPLE Steps - Five Minute Freedom Tips
How to Change a Glock Trigger Shoe in 3 EASY Steps! - Five Minute Freedom Tips
zhlédnutí 45KPřed 2 lety
How to Change a Glock Trigger Shoe in 3 EASY Steps! - Five Minute Freedom Tips
What is JettaMan Designs...with your host RAMjetta? - Channel Trailer
zhlédnutí 513Před 2 lety
What is JettaMan Designs...with your host RAMjetta? - Channel Trailer
You Missed the Olight Flash Sale?! Find out how to get 10% off anyway! Warrior Mini 2 Regal Blue!
zhlédnutí 138Před 2 lety
You Missed the Olight Flash Sale?! Find out how to get 10% off anyway! Warrior Mini 2 Regal Blue!
Don't miss the OLIGHT FLASH SALE JAN 2022 featuring the Olamp Nightour & Warrior X 3 in Dessert Camo
zhlédnutí 106Před 2 lety
Don't miss the OLIGHT FLASH SALE JAN 2022 featuring the Olamp Nightour & Warrior X 3 in Dessert Camo
How to Setup your Dremel Workstation in 3 Easy Steps for First Time Quality - Part 2 Level & Square
zhlédnutí 8KPřed 2 lety
How to Setup your Dremel Workstation in 3 Easy Steps for First Time Quality - Part 2 Level & Square
How to Assemble Your Dremel Workstation for First Time Quality - "The Prequel"
zhlédnutí 1,4KPřed 2 lety
How to Assemble Your Dremel Workstation for First Time Quality - "The Prequel"
How to Setup your Dremel Workstation in 3 Easy Steps for First Time Quality - Part 1
zhlédnutí 16KPřed 2 lety
How to Setup your Dremel Workstation in 3 Easy Steps for First Time Quality - Part 1
Polymer 80 Holsters by HCM Holsters - Commercial by JettaMan Designs
zhlédnutí 154Před 2 lety
Polymer 80 Holsters by HCM Holsters - Commercial by JettaMan Designs
Builders Showcase Minute - Custom Polymer80 PF940C - G19 in FDE
zhlédnutí 1,1KPřed 2 lety
Builders Showcase Minute - Custom Polymer80 PF940C - G19 in FDE
AR10 6.5 Creedmoor "The Patriot" by Turner Gunworks Customs @ Marine Gun Builder forum
zhlédnutí 213Před 2 lety
AR10 6.5 Creedmoor "The Patriot" by Turner Gunworks Customs @ Marine Gun Builder forum
Polymer80 Glock 19 "Maximum Effort” X-Force Deadpool G19 by "We4ponXYZ" of Marine Gun Builder forum
zhlédnutí 367Před 2 lety
Polymer80 Glock 19 "Maximum Effort” X-Force Deadpool G19 by "We4ponXYZ" of Marine Gun Builder forum
ATF PROPOSED RULE CHANGE DEFINITION OF FRAME OR RECEIVER - FINAL CALL TO ACTION - PATRIOTS UNITE
zhlédnutí 225Před 3 lety
ATF PROPOSED RULE CHANGE DEFINITION OF FRAME OR RECEIVER - FINAL CALL TO ACTION - PATRIOTS UNITE
Remembered Always: A Memorial Day Tribute to Our Fallen Soldiers who are Never Forgotten. Thank you
zhlédnutí 168Před 3 lety
Remembered Always: A Memorial Day Tribute to Our Fallen Soldiers who are Never Forgotten. Thank you
Much better odds at 2330ft per second.
zhlédnutí 231Před 3 lety
Much better odds at 2330ft per second.
The Constitution is Under Attack but "The Protector" is on the Job!
zhlédnutí 203Před 3 lety
The Constitution is Under Attack but "The Protector" is on the Job!
The Constitution is Under Attack but "The Protector" is on the Job!
zhlédnutí 85Před 3 lety
The Constitution is Under Attack but "The Protector" is on the Job!
Gun Control Is Nothing but a Criminal Hall Pass
zhlédnutí 266Před 3 lety
Gun Control Is Nothing but a Criminal Hall Pass
Gun Laws Aren't Enough of a Compelling Argument for Criminals to Fear
zhlédnutí 354Před 3 lety
Gun Laws Aren't Enough of a Compelling Argument for Criminals to Fear
Thanks brother!
@@tylerkaczmar6114 you're very welcome.
Thanks man. Helped me out 👍
@@DustinHalbrooks you're very welcome. I'm glad it helped.
hi, if possible, i want to ask a question about glock 43x Firing ping. When the gun is not loaded, the bullet is not in the barrel, when tilting the gun down, up, if you move the gun to the sides, you can hear how this part dangles inside. The sound is loud. I would like to understand, this should not happen, right? Thank you.
Actually that's normal in all Glocks (even clones like mine) if the gun hasn't been put into battery (slide racked). If the gun is empty but the slide is racked, then once the trigger has been pulled the firing pin will free float inside the channel. That is likely what you are hearing. With the gun empty rack the slide then shake and see if the rattle stops. If it does then you're good to go. If it still rattles then take it to a gunsmith to check it out. With that being said, it shouldn't be an overly lowd rattle. If it is there may be another issue. In that case I'd advise taking it to a gunsmith asap.
@@JettaManDesignsthank you
@@Otomochemhochy you're very welcome. Thanks for the question and for wantching.
OK, I gotta ask, apart from a smooth as butter trigger pull when dry firing on the couch watching John Wick 2. How does this, did this, affect your groups shooting paper targets?
Good question. The short answer is that this alone will not improve your grouping. There are other fundamentals that you must master in order to improve your grouping. However, doing this, if used with a proper trigger pull, will help you to not only improve your grouping but with enough practice, will help you do it faster. Give it a try and get back to me. (The long answer). Now if you want to step up from shooting paper targets then you can decide to do this modification and step your game up and start ringing steel on the move or in competitions. There's a reason the higher tier guns have buttery smooth triggers. Trust me, their bars are worked to death. In an emergency situation your target isn't gonna stand still while you shoot them. This modification improves the trigger grittyness often found in glock triggers (and clones using glock OEM parts). It also helps on the reset. You can take a step further and change the connector and vastly lighten the trigger pull (the 10 trigger pull average on my EDC is 3lb to 4lbs but my competion builds are 2lb to 3lbs. However, if you're rocking a Glock with a 5lb to 6lb trigger pull and only getting to the range once or twice a year to shoot paper targets and you feel thats all the training you need to successfully protect your life and the ones you love, then again, this is not the mod for you. But I do suggest you give it a try and let me know how it turns out. (just my 2 cents) JettaMan OUT!
Daaanngggggg
@@GotGammage wzup Gammage. Thx for the sound bite.
@@JettaManDesigns brahhh!!!! It’s the truth sometimes!!! lol
@@GotGammage no doubt
This video came in clutch like Jordan in the finals! 1.2.3 and it was out. Thanks for the video!
@@ShawnKing-qr1ik you're very welcome. Glad I was able to throw you the alyoop (I guess that's how you spell it lol). Good slam dunk sir.
good tutorial subscribed
This was an extremely helpful video.
@@murphytoadster9864 glad to be of service. My apologies for the delayed response.
I had an ebay Glock trigger shoe laying around my garage, i thought it was the same even though it was cheap aftermarket Glock trigger shoe but after I installed it it had an awesomely short trigger pull and was very happy.
@@murphytoadster9864 that's great. I hope it's working out for you. My apologies for the delayed response.
Well said!
Thank you sir.
Ohhh Mannnn
Try cutting the point off a toothpick and use that as a guide to keep everything aligned. As you screw the set screw in it will push the piece of toothpick out the other side.
Yes you are absolutely right if you're using a shoe that has a full pin (i.e. the original Ranger Proof Shoes like the red one shown here) or set screw that goes through to the other side. The Empire Stiletto shoe pictured does not have a set screw that goes all the way through neither does any of the new Ranger Proof shoes. Thanks for the input because that is a good technique when using that type of shoe. Good stuff.
Very nice video.
Thank you very much! More to come.
is aluminum polish ok for steel?
Great video, thanks for the instruction
You're very welcome. Thx for watching.
Helpful, Thank you
Glad it was helpful! You're welcome and thanks for watching. Mote to come.
Thank you for a concise and well edited video. I’ve taken my Glocks apart to polish trigger connectors and do deep cleans, but I’ve never had to replace a firing pin spring…but I think I may have my first one. While at the range today, we experienced two light primer strikes (back to back) resulting in misfires. First time I’ve ever had a Glock not go bang, and I’ve shot a LOT. The good part is that my grandson was with me (he was actually the one firing), so he got on the spot training about how to handle a misfire, and the difference between a hang fire. Invaluable experience. Now to search for lint, weak/broken spring, broken firing pins. Since it’s a retired duty firearm and now one of my main EDC’s, lint is definitely a possibility. Even some stray oil that got tacky, but I doubt that one, as I’m really stingy with oil on my Glocks. Anyway…thanks. After watching your video, it’s now a simple job. So glad yours was the first one I clicked on. No need to search others. REPAIR EDIT: Analysis-breakdown revealed TWO separate problems that manifested at the exact same time. The odds are a LOTTO-LARGE numbers. 1. The slide lock lever (the one you pull down to take the slide off) had bent SLIGHTLY, and it was sticking down, which was causing the slide to just fall off. It was aftermarket (extended version) and I replaced it with a different manufacturer this time. Arthritis causes me to need the extended version. 2. Replaced the firing pin spring and that fixed the light primer strikes. Whole replacement time was about 10-15 minutes and that included explaining things as I went to my grandson. I now have those extra parts, including two firing pins in my safe. Happy camper.
@@sax5055 thats awesome. My apologies for the delayed response. I think it's great that your grandson got that experience as well. I too prefer to use aftermarket extended slide releases (and a couple raised) due to my high and tight grip. I've never seen one bend as you described though. Maybe that one was a QC issue. Anyway, I'm glad this video was able to help and please let me know if I can help in any other way in relation to the Glock platform. Stay tuned for more.
@@JettaManDesigns No worries. I’m retired and only work one day a week. Range tomorrow with son and grandson. Nothing but good times. Concerning the bent slide release, it was definitely odd. I have “a few” Glocks and never had an issue like that. I don’t know how you’d QC a simple piece of metal. It had about 2,000 rounds through it. Just one of those things. I don’t carry a backup firearm on duty…I’m rethinking that one. I may have to confiscate my wife’s G43 😏 But a G26 sounds better…I can shove one of my 24 round mags in it. Yeah…I just talked myself into another Glock 🤷🏻♂️😁
This is a magnificent build man...wow! It's a disgrace that this video doesn't have more views...well done👍!
Thanks a lot and thx for watching. Yeah CZcams deleted the build videos and gave me channel strikes but you can see them on my Rumble page (rumble.com/JettaManDesigns) Friggin commies.
@@JettaManDesigns What do you think about those empire pbf stiletto triggers? I'm thinking about getting one for my next build... either that or a serpico!
@@WillyMandingoWinchesterlove it. I was able to snag one for another build I'm working on. I'm gonna run it with the Glock Performance Trigger in a Strike Industries Strike 80 frame. Wait til you see that one.
@@JettaManDesigns I look forward to it! Don't let CZcams and haters discourage you man... you're doing a great job! I've learned a lot just watching you! Thanks for your input on the trigger and take it easy!
@@WillyMandingoWinchester thx doc. More to come soon.
Didn’t realize I missed this post! Great video! Its Bladeboy btw….
Hope all is well with you and the ol fireside gang!
Excellent video.
Thank you very much! Stay tuned. More vids dropping this month. Finally got my work space back.
Awesome tips, thanks for sharing, going to go now and tighten mine up, only unpacked and setup quickly earlier this evening! 👍
Thanks for the video, straight to the point not a lot of useless talking like other people, keep up the good work.
Thx and thx for watching. More to come soon. I finally got my work space back.
@@JettaManDesigns excellent best of luck
Thank you. I'm about to buy a workstation. Useful advice.
Glad it was helpful! How did your purchase go?
@@JettaManDesigns yes. Very good addition to the workshop. Most of my projects are small benchtop builds. A large drill press, while nice, is too big for the space I have in my shed. I'll keep watching your channel.
Excellent video. I ordered a new Factory spring to replace the one that has been on my Glock 19 for over 10,000 rounds. Started getting some light strikes so I'm going to see if a new spring will take care of the problem. Also ordered a VISM Glock tool. I'll review your video again when I ready to make the change. Thanks again. I just clicked on subscribe.
I hope your results have been stellar. Glad to be of service.
@@JettaManDesigns I changed that spring and that solved the misfire problem!
@@msweeney70 outfrigginstanding
Debating if there are benefits to doing this on the Glock rails and slide connections to smooth out the slide movement…
Go for it. It couldn't hurt. Thx for watching. More to come soon.
NO!
Cut your nails bro 😳
Question. How you attach the flex shaft to the dremel workstation? You just hanging it or in the mount? (I’m having issues finding how to install in the mount!) haha good video!
Lol thanks for watching. Once it's installed in the dremel I just hang it over the wire strap on the top. 🤷🏾♂️. Thx for the question.
Good video ... Thank you!!!
Thank you too and thx for watching. Stay tuned for more.
Your videos on the finer points of setting this unit up are very helpful. I especially liked the previous one showing how to get the chatter out of the tool. I mount tools like this to a board that extends out on either side of the base by about 6". (You can see the holes in the base through which to pass the screws. Or you can countersink them from underneath and use nuts above.) That way I can clamp the board rather than the tool and the clamps do not get in the way of my work. I can move it to any surface because it is not screwed to my workbench. And it makes the base wider and thus more stable. I also made a wood table to fit snugly over the base so that should I ever be off from exact center, I won't immediately drill into the metal base. Just some thoughts that might be helpful.
That sounds great. I'd love to see a pic of your setup. I'd gladly share it on a followup video. Email to Ram@jettamandesigns.com if you like. Thanks for watching and the tips. I may give it a try.
Great vid
Thx, I appreciate it. More to come.
is it possible to keep or arrest the plunger in the down position.
I don't believe so but why wouldn't you just loosen the height adjustment lever (minute 4:29) and lower it to the height desired?
I got a Glock 17 gen 5, I really want to get the apex trigger but I want to keep it as stock as I can, thank you for this video man.
Right on. You're very welcome.
@@JettaManDesigns polishing up the trigger bar though really makes the gun run smoother?
@@Cowboybounty yessir. Give it a try.
3000 grit wet sanding works really well too and is a slightly faster process than actual polishing. I usually start at 2500 grit and work my way up to 4000-5000 grit for that mirror smooth finish. Oils also works in place or water for wet sanding.
Thank you!! I could not figure out how to get the Dremel in the nest
You're welcome. I'm glad it helped. More to come, stay tuned.
Thank you for taking to time to make this video. I just purchased a Vickers trigger shoe for my G33 and your video was just what I needed to complete my project. Thanks again!
You're very welcome. Thx for watching. More to come. Stay tuned.
Great vid I punched mine through the other side when removing the bar 😂
Lol thx. That's one way to do it lol. Glad to of service. More to come, stay tuned.
Made my day!!!!!
Glad to hear it. More to come this month. Stay tuned.
Hi, thanks, your video is great. Tightening all the screws and those two extra hex nuts underneath/near the depth stop which @budizen3014 in the comments recommended, has helped a lot. But, there is still lateral movement when the handle of the press is pushed all the way down. This means the drill bit moves slightly to the left. I don't know what to do! I don't know if I'm expecting too much from nylon threads (why nylon). People are saying they have no play at all so I must be missing something. But still much better than before. I've subscribed. :)
What about the m4 bit? Can't get it to fit in the dremel
Thx for watching. The collet that comes with the dremel won't accept the 4mm bits. I suggest purchasing the Dremel 631 Brad Point Bits and using the 5/32 bit (slightly smaller). The shank on the 631 bits are shaved down to fit the dremel collet. Once youve completed the holes then run your m4 bit through the hole BY HAND to get it to the correct size. Let me know if this helps.
Awesome video man. I appreciate someone actually explaining it in an understandable way lol
Glad it helped! Thx for watching. More to come soon.
Great, easy to follow video instructions! Thank you!
Glad it was helpful! Thanks for watching. More to come.
Thank you!
16 Lbs?! lol
You're very welcome. Thx for watching. More to come.
You Sir are a genius!! Been having a hard time installing my firing sleeves. Used my bench block and voilà, done. Great work and thanks for the video!!
Thanks for the compliment and you are very welcome. Glad it helped. Thx for watching. More to come.
Looks good man
Thank you sir and thx for watching. More to come.
I got my workstation but I have a question. The metal pipe it turns easily. Is it suppose to do that? How do you keep it from turning How can the dremel work properly if the bar keeps turning
Sorry for the delay. No it's not supposed to spin freely. At the rear of the base there should be a "Base Hex Bolt & Nut" to tighten that. I have filmed, "How to Assemble Your Dremel Workstation for First Time Quality - "The Prequel" (min 1:00 - 1:25) where i showed the full assembly but CZcams in their infinite wisdom deleted it and gave me channel strike. Anyway, you can check it out on my Rumble channel at rumble.com/vrlrys-how-to-assemble-your-dremel-workstation-for-first-time-quality.html Let me know if you have any other questions. Thx for watching.
I’ve got a question for you and this might be my problem is the fire pin spring I’m not sure but my Glock when I rack the slide without a magazine in it 50% of the time the trigger locks in place, so I can dry fire the other 50% of the time it doesn’t do you know what that might be
How's it going James. Just a clarifying question, are you saying that when racking the slide the trigger is locking to the back and not reseting?
Ma man needs to cut the nails lol
Thankyou I now know my plunger is stuck it should have dropped out like I thought with the extractor
You're very welcome. Good luck getting it unstuck. Let me know if you need any further advice in this area.
Someone put my plunger in without the spring because it launched into the stratosphere, never to be seen again. I got a new spring but can’t get the plunger out yet.😢
@@JNeedels don't sweat it if you got to get a tiny needle-nose plier and yank it out u gotta. I had one that did not want to come out as well
@@lilrugah3433 thanks man, I learned a valuable lesson from you though. I needed to pull out the firing pin completely before attempting to get plunger out.
Thank you sir 🫡 subscribed!
You're very welcome. Thx and thanks for the sub. More to come.