Video

Thank you sir for sharing your experience so we can buy directly the best edf set and we don’t have to spend a lot of money finding the good one

Awesome! How many ml does the stock fuel tank hold brotha?

One hell of a hand launch 🚀

Excellent test, what do you think the beginning voltages were? tia

i have the fms futura v3 which comes with the 3665 motor but plastic EDF its on 6s stock, can it take 7s out the box ( i have upgraded the ESC to a HW 130A)

e-Flite, "Hold my beer." XFLY, "Hold both my beers."

What ESC and motor combo is that ?

wish i could of seen the battery placement. gonna try 6000mah on mine

Can you provide details of what angle the thrust tube is at to achieve this? It looks worth copying and tell the "mad scientist" well done ! 👍

Awesome. 6+ minutes. Seems like it has 6s 3600 or something like that. ❤❤❤❤❤

Very nice, 2 minutes. ❤❤ what about timing for ESC ?

Did you run the stock EDF unit?

I just bought a banshee what do I need to do this upgrade ???

The ball links that come with the kit are perfectly fine. No need to spend $100 on linkages.

The video is very clear i bet anyone even people who are not rc pilots can uslndersand, keep up the good work

Nice!!! 🔥🔥🤝

Nice. what fan and lipo pack do you use?

Update: ran this exact set up and everything was great until the 10th flight. The fan blew itself apart at max throttle during take off. The motor might be able to handle 10s but the fan has potential to fail.

And this is a dog fight between freewing F22 and this fw mig 29 both with xicoy45 setup czcams.com/video/PF6XcL5zhzs/video.htmlsi=dvEcS5HSjR-Q-3u2

Maybe the flyfans K8 is even better ...i have both❤

I see some war time behind it

Nice!@

4s available??

Did you scuff the matte covering or just clean?

hey garfield! ive just faced this issue with brand new retracts for the mig29 80mm were you ever able to figure out what the issue was? ive sent a mail to motionrc as i just purchased them and they died after one run.

8s. More weight, been there done that.

I see you play dangerous on your battery level 3.77 will get you into trouble one day. I never go that low and my battery's , and they don't swell, plus they last longer, good flight. just a tip.

Maybe some 1920kv 9 blades on 8s 😊

Complite guid!

that is actually really good!! What burners are you using? That can affect things too...

The crash is an example of an accelerated tip stall, which this particular model is fond of doing. I noted that the plane made a fast tight turn ljust before the crash. and this resulted in an accelerated tip stall that led to the crash. This plane is what we know as the king of tip stalls. You fly slowly? You lose power? You attempt to do tight loops and abrupt changes in direction? You flare just a tad too much when landing? You take off with insufficient speed? Yes, tip stall. And no SAFE will save this model from destruction. Once you tip stall at low altitude, it's over. And this model is so heavy for its size that its wing loading suffers accordingly. Therefore, it's critical to fly it scalelike at all times, and never, ever cut the throttle on landing. This jet DOES NOT glide. It simply drops like a rock in a tip stall manner. Takeoff must be scalelike-very shallow climb, not Timber style.

How large is the opening at the rear of the plane?

Damn... wish I would have seen this video before I bought a schubeler fan..

Not to be a hater at all, I think this is extraordinary! But how do we, the viewers, know that it's an 18S setup other than your word?

What sort of amps u drawing

Heavy into pylon racing, I discovered that you can't get an accurate speed from a radar gun standing way off to the side like that. To get a speed reading that's real, the radar gun must be in line with the approaching plane. Off to the side like that the readings will always be higher than the true speed.

136mph on 10s? I didnt like my 10s. I prefered 9s. Easier on the packs and tad less weight. Be to see if them SMC packs puffed on that 150A draw. I've read they dont dish out well on high demands. 6s yes ideal. But 9s 10s etc im happy with my Lipos. Its whats putting me off investing into a bucket load of SMC. That plus the many factory push backs for nearly 1 yr now.

Do you use flaps when taking off AL 37?

What fan and kv?

The fms 1500kv is for 8s no? How are the temps at 10s?

I got mine up to 225 kmh on the stock setup with 6 cells. I had to use a 500 foot dive though 😂

Great save!!!

Fms 1500kv edf unit?

Dude stop relying on your telemetry I dont care what that thing says keep your flights 3min max then prepare to land.

Im basically gonna run the same setup as you with the castle 160amp esc. May I ask what settings you have on your esc? Imo's cares about what timing you're running

I'm running the same ESC on my setup 10s. What are your ESC settings?

I found this to be this set up to be an Amp monster. In my F22 on 5° it was at 140A 3486W around 3.9kg thrust max. Just too much for my lipos. The 1500kv on 9s is kinder on the lipos at 130A producing 4.6kg of thrust in the F22. Thanks for the upload. I also ran this set up on my Venom too. 2.3kg plane, 3.8kg thrust and 130A draw 8°. But top speed wasnt great at 111mph. It climbs on full power and needed a down EL mix as throttle went to 75% upwards. Plus it gets the wing wave wobble with this extra speed/power. Unfortunately i destroyed it from an unrecoverable stall and demolished against a brick building.

Nice

Well Done👌

Nice job😊