Video

In the first case study, where you able to verify the main sources of water entry /moisture ?

Great video, thanks!

@53:28 Question was: "Is UHPC generally heavier than conventional concrete?" WJE materials engineer Elizabeth Nadelman gave a very enlightened answer beginning with an authoritative declaration that "the typical density of conventional concrete is 145-150 lbs per cubic YARD". I know she definitely knows what she is talking about because she then followed that up by smartly stating, "UHPC is a little bit heavier than that because of the steel fibers found in UHPC and therefore typically weighs anywhere from 155-160 lbs. per cubic YARD." WJE should be delighted to hear that Boeing Aerospace is currently in the project funding phase for development of a basalt fiber reinforced all UHPC flying luxury cruise ship that is expected (based on Ms. Nadelman's expert findings) to typically weigh less than a cubic bundle of Howard Hughes balsawood sticks.

how do you calculate the total adiabatic elevation (adiabatic temperature rise) of concrete in this semi-adiabatic box?

Why arent more comments pointing out the pool deck columns were under designed since day 1? That is the smoking gun to me and should have been identified during initial construction. Someone cut corners back then or is completely incompetent.

This program was very well presented good work

🙏👍👷

If I say so myself, I find some interesting videos on YT... Very cool gentlemen, hope you're both doing well! Interesting business.

Is this machine works for bitumen based membranes as well ?

Lots of great information, well done.

Thanks

P r o m o S M 😪

Well done seminar . You covered the major performance and reliability issues. I hope the consumer market will see product soon. The heat lose improvement is significant.

What would be the main difference between silica flour and silica fume?

When considering the weight difference between UHPC (155-160 pcf) and NC (145-150 pcf) you need to consider that UHPC has some of the reinforcement in it already even if the application is only shrinkage. That consideration of reinforcement amount and weight would increase the pcf weight of NC by at least a little. The fact that UHPC is about 3-4x the compressive strength of NC also might bring in add'l weight for the NC when reinforcement is used on it for increased compressive strength.

The Surfside officials swept alot under the rug and said it was an act of God!!

When buildings are that close to the salt water, It must be Mandated that they use STAINLESS STEEL REBAR which won't rust like steel rebar will. it doesn't cost that much more and they were getting ready to spend over 10,000,000. on concrete repairs. stainless steel rebar would have been way cheaper.

Very Informative video Well done

This is a very depressing story. This collapse was completely preventable. People should not be murdered by their home. I would be very nervous if I lived in the sister building a few blocks away.

Seu channel é muito bom O ruim é que eu não sei falar inglês

Most interesting to me has been the still obscure history of the genesis and prescription of the “40-year Recertification" requirement. Who approved, who adopted, and who influenced (if it was) the official creation and handling of such new, broad and very important document for the present (back then) and future of the real estate market and its "health". I say this because it might have been redacted and sent to city officials as "the requirement" or something that seems to be the sole requirement between notice of completion and 40 years after, therefore possibly influencing in opposite effort or mindset to the original preventative mindset or effort with which "recertifications" should be handled by associations, public in general, attorneys, professionals, etc. (assuming this preventative mindset is aligned and is a good example of responsibility: to "advance our nation's quality of life and protect the public's health, safety and welfare". If 40 years is not enough to make sure buildings don't collapse (and it wasn't enough back then since it all came from a building that had collapsed after 40 years) then why was the policy or prevention bar set at 40 years? who benefitted from that number, and who really set 40 as THE number. Thanks!

Quite informative and I am no stranger to a lot of the subject matter

The under-designed pool deck was not waterproof. This allowed water in. The rebar rusted and the concrete slowly started to dissolve. You can see the wet areas on the deck photos. Faulty repair and faulty repair design.

I am concerned about the lack of security video evidence. To date the only video released is the one we've all seen and the only reason we see that is because the condo tower from which it came released it directly to the press. Champlain Towers' own security video should be available because the portion of the building where the office is located and more than likely the location of the recording devices, did not initially collapse and there is no reason why they would not be retrieved before the building was demolished. At the very least someone should offer an explanation of what happened to each and every video recording that captured the collapse. Did the condo tower on the other side of Champlain not have security cameras? I dont understand why no one questions the lack of video evidence and just accepts that the one we see is all there is. That doesnt make sense and it defies logic. I say this because I have worked in building security for more than 20 years and I know about security camera systems. I have worked in everything from beachside condo towers to 50 story office buildings. There is tons of video footage of this collapse. I guarantee it.

I know this is almost immaterial to the investigation; the part that confuses me is why it failed in the middle of the night. In a progressive failure like this I tend to have a mental model of strength gradually decreasing over time, with noisy actual demanded loads, and failure occurring when actual load exceeds the strength. But because the strength decrease is slow compared to the timescales over which the actual loads are noisy, you tend to see failures near locally-high loads (in the temporal sense, not spacial.). But in this case... as you mentioned, it's the middle of the night and all is quiet. You've pretty much got your baseline load and that's it. No live load to speak of. Why did it fail at 1:10 AM and not, say, 7PM the previous evening when there presumably would have been people (and hence additional load, and worse, live load) on the pool deck? Was there rain that evening? How much of a temperature swing was there?

Did the pool deck slab also act as a strut, propping the top edge of the basement retaining walls? If so, once a significant portion of this slab failed in punching, struct action would have been removed and horizontal loads from lateral earth pressures on the basement wall could then act on the columns.

Very informative and useful information. Nice presentation. thanks for sharing.

Aa

Здравствуйте! Испытайте пожалуйста на прочность при попадании в плиту из uhpc бетона авиационной против бункерной бомбы (gbu 28), какая толщина Вашего бетона не пропустит её насквозь???!!??? Обязательно чтобы бетон был армирован микро стальной фиброй. Благодарю. Я тоже делаю подобный бетон, но работаю один. У Вас возможностей побольше!) А вопрос сейчас актуален как никогда. Если результат будет, то этот бетон у Вас купят для укрытия богатые люди. Мира всем и добра!

Привет! Очень интересно какую толщину uhpc пробьёт или наоборот не пробьёт (gbu 28) против бункерная авиационная бомба???!!??

Great video. Thanks for your the information. I'm more concern about the shrinking effect if compared to conventional concrete. Could you please elaborate more on this issue?

There are some incorrect statements with regards to the concentrated business use areas (33:15). Per 1004.8 you do not need the building official’s approval to increase the occupant load from 1occ/150SF to 1occ/50SF. The code language states “where approved by the building official, the occupant load for concentrated business use areas shall be the actual occupant load, but not less than one occupant per 50 SF”. Meaning you can go denser than 1occ/50SF with the building official's approval. Section 1004.5.1 increased occupant load already allows the designer (without the building official’s approval) to increase the occupant load from those in the table as long as you can accommodate the increased occupant load with the egress, restroom capacities, etc.

I am selected this topic for Mtech Project ....

hi Today is my presentation on UHPFRC topic.

At 5 minutes 46 seconds, it's shown that water-cement ratio is less than 0.20. What about adequate cement hydration?....Hydration needs roughly a water-cement ratio of 0.23.

ｐｒｏｍｏｓｍ

52 Lbs of superplasticizer pcy seems highly excessive. Most documentation I find suggests 1% superplasticizer at most of concrete weight, The UHPC mix in this video has superplasticizer around 4.5% the weight of the cement.

Sir, pls share the ppt of this topic . It helps me more in my project ☺️😭

thank u very much

What they have here is chinese drywall and popcorn ceiling with asbestos.

The knobs of the showers and sinks are thin plastic and someone just to try to open it they just breake in your hands, thid is awful,.. the maintennce guy told me that no longer did stainless steel one were sold. Does he think i was born yesterday its just awful.

Frequent... sounds like a plastic breaking. They come from the walls also.

Is there a general life cycle for different street lighting poles? (prestressed concrete, galvanized steel, cast iron, etc.) 50yrs, 75yrs?

Using for years here in France for thin bridges artistic building walls and especially in exterior furniture designs This is a huge breakthrough for steel-less designed projects

The lack of information about the Carbon Dioxide emissions of this UHPC concrete is worrying, and throws any benefits out the window if we cannot decrease these emissions. As this is the current need for infrastructure at the moment.

Plz show more interpretations of voids thnx

How can i reduce shrinkage ?

Cool!

Thank you Dr.

I'm working with UHPC since 1985 (Densit a/s, a company of Aalborg Portland Denmark where Hans Henrik Bache invented the first UHPC in 1978 and used for the repair of the stilling basin in the Kinzua dam in the USA) in different areas and while I do like your presentation I have some question marks. For example a packing model was used by Bache in the 1960's. Further an UHPC is not always reinforced with fibers, not always contains only fine aggregates and not always a free flowing self compacting concrete. UHPC has been, since 1985, designed for performance in many business area's like Security Industry (bank vaults, safes, ATM's, etc. and military shelters, etc.), Wear Protection in systems to transport abrasive materials, Civil Engineering and Offshore.