- 13
- 1 661 864
Danny Rincon
United States
Registrace 15. 09. 2012
WORKBENCH WITH TONS OF STORAGE
I built this workbench to replace the previous one that I was using, as there was a lot of wasted space underneath it. I also needed better solution to get into my Milwaukee Job Site Organizers and during a project but they need to be easily removable for mobile work. and also storage for my Milwaukee Pack Outs, This is what I cam up with.
zhlédnutí: 6 411
Video
HALL TREE / DROP ZONE BUILT IN
zhlédnutí 62KPřed 4 lety
This is a custom built in (hall tree) that I built for my sister. I was able to take measurements and build off site in my shop. I made the carcasses slightly smaller than the opening to allow for the house walls to be out of square. The face frames were built longer to allow cut to fit on site, for a perfect fit. Plans are to follow so on my website.
CRAPS TABLE
zhlédnutí 6KPřed 4 lety
I was commissioned to build this portable craps table. It was a fun build. I have never worked with foam or fabric before this project but it all worked out in the end.
ROUTER FENCE WITH DUST COLLECTION
zhlédnutí 6KPřed 5 lety
This is a follow up project to the router cabinet that I built a couple weeks ago. Its a very simple design and can be attached to you the back side of your table saw fence also includes dust collection.
ROUTER TABLE
zhlédnutí 4,5KPřed 5 lety
Built this custom router table / table saw extension wing to utilize the wasted space on my Laguna table saw. I got the inspiration for router bit storage drawer from this build from the Fix This Build That channel's router table video. If you notice the different variations in the wood type or size for the drawers, Its due to trying to use up shop scraps. Keep an eye out for the router fence b...
Blanket Ladder
zhlédnutí 1,6KPřed 6 lety
Just a ladder to hold blankets or towels by the pool. Music by Joakim Karud czcams.com/users/joakimkarud
Haboob 2017
zhlédnutí 1,3KPřed 7 lety
Not my normal content but thought you guys would enjoy! This video was shot on 07/09/2017 in the afternoon. This is a regular occurrence in Az during Monsoon season. Filmed in Casa Grande Az. If this video is used you MUST credit my channel. Thanks for watching!
Dog house for Rufus
zhlédnutí 870Před 7 lety
Built this dog house for my niece's dog. Inspired by the Modern Builds channel Music by Joakim Karud soundcloud.com/joakimkarud
INDUSTRIAL BAR CART
zhlédnutí 6KPřed 7 lety
Built this to store our adult beverages. Hope you like it! Music by Joakim Karud soundcloud.com/joakimkarud
VINTAGE TRACTOR SEAT
zhlédnutí 2,1KPřed 7 lety
Had an old tractor seat laying around so I made a quick shop stool. Dance Monster - Electronic Medium by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/) Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100272 Artist: incompetech.com/
CROSSFIT BOXES FROM RE-PURPOSED WOOD
zhlédnutí 733Před 7 lety
Made some plyo boxes for CrossFit Arizona out of old olympic lifting platforms. The woods was not perfect but we made it work. www.crossfitarizona.com Music by Joakim Karud soundcloud.com/joakimkarud
PLYWOOD CART
zhlédnutí 19KPřed 7 lety
Got tired of moving plywood, so I built this. Hope you enjoy! Music by Joakim Karud soundcloud.com/joakimkarud
CUSTOM BAR BUILD
zhlédnutí 1,5MPřed 7 lety
Plans for purchase at measuretwiceplans.com/product/custom-bar-by-danny-rincon/ Here's a bar that I was commissioned to build over a few weekends. Some of the video clips got lost due to my garage being over 110 degrees, my DSLR was overheating and would stop filming without notice. This is my first of many build videos so please like and subscribe, I'm sure they'll get better. Thanks!............
could yall imagine what that truxk load if wood would cost these days?!? 😮
Really interested in doing this exact build for my speakeasy I went to the link to try and purchase the blueprint but it said the website was no longer in service. Do you happen to know where I can find the blueprint ?
All nice clean tools, and a bottle of beer on the back counter to drink after finishing to admire the work :)
Very nice! Do you have the dimensions on the sliders .
I believe they were 18".
Danny, I am going to mimick this in my mud room, looks nice/Simple. You could always go back and do a voice over with insructions on the same video. FYI
Nice.
Like the bar...The music is dog shit.
Well I've got a hand saw, a drill and some screws, I think I'll give it a go 😅
Is that a plywood top ! Fantastic video, very skilled man !!!
How much overhang did you do?10 inches?
12" if I recall correctly.
shouldn't you have removed the flooring and baseboards?
Nice
Good video and nice bar. Sadly the most. Annoying music makes it unwatchable
But you still watched it though! Thanks!
@@rinkelton muted which is never ideal
This is EXACTLY how I want to build mine. I've thought about putting a couple of the windows on the side of mine to highlight certain bottles with lights inside. I wish we could have seen the finished product and how the window was used. Thanks!
When you attach to concrete floor, do you remove the layer of carpet before attaching?
I dont think taking up the carpet is necessary just in case you need to remove it at some point. But would definitely secure it so it wont tip.
Can you please help me, i paid for the plans and have yet to receive the link. Thank you in advance.
Did you try looking in your junk/spam folder?
Great work and the dog getting in the camera was an extra bonus 😂
You watch the video but have to purchase the plans 😂😂😂
My daughters really enjoyed the dog checking out the camera
Nice video but can you give the dimensions , size of screws and any other materials needed.
Absolutely gorgeous u did a wonderful job 👍👍👍👏👏👏👏👏
Great work enjoyed the video and dog haha. Just curious about how much time did this take from start to finish ? Hard to tell with the time lapse
I would say maybe 2 weeks?
I purchased the blue prints when do I receive them
Should be in your email. Check your junk folder.
Thank you I found it
Wow. Love the hack using clamps and a skillsaw to create a table saw jig like that. Great stuff.
What’s the dimensions?
6'x3' I think?
Music choice is brilliant.
Good Job!! Doing the same thing and would like to know if you the attach the coat hook into the stud or just directly to the 3/4 plywood.
Attached to the 3/4" ply.
Very nicely done! If you have the opportunity to purchase a Castle pocket hole machine, oh man, you'll love it!!! The Kregg's are alright, but the offsetting issue is pretty bad. With the Castle machines, this is virtually eliminated. :) Great work!
Long shot but would you have build dimensions and material list in this? Trying to build and outside bar for my patio! Thanks in advance
Link in is in the video discription. Thanks for watching!
Great work homeboy
Thanks!
I can’t stop watching this video. I’ve researched the pocket jig and it only goes up to 1.5” thickness of wood. You’re using 2”x4” correct? How does that work? Thank you in advance Sir.
2x4s are not actually 2x4. They are about 1 1/2 x 3 1/2. Measure one you'll see.
@@rinkelton Much appreciation. You’re correct.
I Watched So Meany of Making Bars in The Future because I Want to buled myself
Bad ass!!! Will this frame hold up a concrete counter top. Thank you Sir.
I would imagine? They put concrete counters on top of regular cabinets and they are ony plywood?
Beautiful
Very clever....but maybe slow things down for clueless people like me who have never done this before??
Great build! I’m going to build one very similar. One question-Do you feel one sheet of 3/4 plywood is enough for the top, or would you double it up if doing it again. Thanks!
3/4" is good I think. Especially with the price of materials right now.
Could you please tell me the dimensions of face frame board you used ? Is 1x3 nominal or 1x2 actual ? TYIA!!
3/4" x 1 1/2" actual size.
@@rinkelton Thank you !!
Exactly what I was looking for ...
That was awesome and super simplistic. Do you have a cut list I can buy from you?
Sorry I dont. Thanks for watching though!
Here's hoping that plans are released on the 2 year anniversary :) At this point, I'm ready to go it alone but I'd love to know what the benchtop itself is made from.
LOL! Its just a peice of hardwood veneered plywood and a peice of hardwood brad nailed to the face to mak it look like a solid peice of wood.
I thought I would enjoy this video but just as soon as that dissonant crap music came on, I clicked out. I simply refuse to watch any video where I have to listen to that shit.
Loved the design! What size are the cubbies on the top and bottom? Also what size basket did you use? Looking to do this in our basement remodel as well as in our entry way. Any plans by chance?
Sorry, no plans yet. The top cubbies were 12"W X 12"H X 12"D and the bottom was 15.25" W x 12"H X 18"D. I dont remember the size of the baskets.
@@rinkelton thank you! This will help determine what size baskets!
Great job dude! Very nice!
Great job!
Fast forward the video 1.5. Music is dope. So is the hall tree
Looks awesome bro! What was the dimensions on the table?
I think it was 3'x6'?
Beautiful
What would I do if it was wobbling
Just use some adjustable feet. Or door shims, once you get it where you want it.
@@rinkelton could you leave a link of what they are it would be a big help
Do you sale them?how much? I need one
Nice one