Video

Thanks bro ☺.

@thathugepillow3577 hi Huge pillow 🤣. so if it isn't written on the board, the only way I know how to check is to plug the cables in, turn the board on, and check it with a multi meter. Set your multi meter to Voltage, take your black wire of the multi meter and ground it somewhere, and test with the red wire of the multi meter. If the voltage is 0 or close to 0, that's ground wire. But I don't think you should worry, cuz I have taken apart 3 old monitors from different companies and all of them had it labelled

@user-bc1ph9xf5z thank you 🤣

☺☺☺

@Q5Grafx that mustve cost a lot !!🤯

The only thing I'd choose over your build is the CPU, and prolly the motherboard cuz of DDR5 compatibility.

@@oneprrcent 🤣 chup jo chush hemara.

@@rinzinnorbu1881 comment bae lap da kha lae give-away ra give away. Drodil ya same comment bae dae nu wai 😂

@@lunosama hahahaha

@iqbalkhaleed3318 that's a really good point actually. I've never thought about that. I started doing this cuz the PC i order back in 2019 came in like that. So I did this 3 times, with more 10hours of flight each time, and I didn't have any problems yet.

@iqbalkhaleed3318 so I did some research, and it says that even though the chances of damaging the motherboard with static is very low, it is not zero. So using an anti static bubble wrap is recommenced. Thank you for bringing this up 🙂, I will pin a comment addressing this

This is your birthday gift 😂

@@kobecurry7530 I should've filmed your AMD rig as well

@kobecurry7530 when I asked you to comment on my videos, this is not I meant. Boto did it better 🤣

@kobecurry7530 you the 2nd MVP cuz you can never beat aue Boto

Ouuu, you the real MVP!!!

As I also mentioned in my earlier comment, GIVEAWAY!!!!

@@rinzinnorbu1881 🤣 choe lu di atara give away jin jin sara inn tae

@@lunosama hahahaha

Thank you for the comment😊😊

Thank you for the comment. So let's break it down and see if this checks out. Ryzen 7 7800x3d costs around 580 AUD here, and the one I chose, 14600kf, is at 400 AUD. Not only is it cheaper, 14600kf is a better rated CPU in 3d rendering that the owner of the PC uses. The main point is that it is better in both single and multi thread performance than the ryzen 7800x3d, which if you don't know, Lumion 3d (software she uses regularly) uses a single core. 7800x3d is more power efficient but theres only a few fps difference between them interms of games, while the rendering performance are better in 14600kf. And for the price difference 14600kf is better imo. And the reason I went with 4070ti is because it has better ray tracing capabilities. I could've also gone with 7900xt which is super good, but it came down to preference at the end. I hope this helps, but let me know which CPU you were referring to, which is better in both single and multi core performance and costs less. [Edit: don't just take my word for it. Here's a link to one of the bench marks. And there are plenty in youtube as well. www.cpubenchmark.net/compare/5722vs5299/Intel-Core-i5-14600KF-vs-AMD-Ryzen-7-7800X3D ]

It's yours !!

Thank you for the comment 😊. You're right. It was a slip of my tongue. It is the Acer AL1717. Thank you again

Thank you 😊

Yes! So when I record, I add a noise suppression filter in obs if i don't want the sound of the keyboard. If OBS doesn't work outside the app, then prolly just find a software that can add customizable noise suppression filters

thanks love

I didn't but if it's zoom65, it should sound similar. Other than that, it will depend on the build you have.

@@lunosama thanks master 🙏

I think it was the stock gateron brown switches that came with the keyboard

Yeah keep it for atleast 5-6 hours. And comes right off. Also don't keep it for too long cuz I did that to one of my screens and the polarizer film peeled off as well

@@lunosamawhat happens if the polariser peels off? Does it not work after that? I installed one on my pc as well but the colors are barely visible. Even the insides of my pc is barely visible

@hardikdhingra6267 if the polarizer peels off, it will not display any image or barely will. In your case, it might be either the background or the light or both. So this works best with a white background, and the pc inside has to be well lit. Any black or dark background really affects the visibility of the image

@@lunosama does the polarised layer being on the inside of the cabinet affect the visibility too? I’ve pasted the flipped screen to the glass. I wonder if putting it up straight would help

@hardikdhingra6267 I'm not sure how that will affect the visibility cuz I haven't tried but, like I said earlier, if you have a low lit background or have pc parts that are black or dark in color will hamper the visibility.

I forgot to film the rest of that part, but it is to remove the anti glare film. You have to keep a wet towel for at least 5-6 hours and peel off the anti glare coat. Don't keep it for too long cuz the polarizer film can peel off too

okay got it!!

Thank you 😊

Yeah, so the small board I mentioned in the video, has a VGA port. I connect that to my pc like how you would for a regular monitor

PC plate, no tape mod but used all foams that came with zoom75 and one of the foam with holes sticks at the back of the pcb like a tape mod. Also used internal metal weight

This video has the full build process, but with WS morandi czcams.com/video/fNl5mKlJEIk/video.htmlsi=44YbfE8lS-GljwXe

Yeah they were prelubed

Yeah lubing them doesn't make much of a difference. I used mine stock for a good amount of time

Hi, I'm not sure if I translated your comment properly, but if Google translate is correct, you mean to say the board that displays LED lights is made of wood? I thought the same too, until I peeled off the sticker. You have to peel it off, and underneath it is a transparent board that displays the led lights like directions and such

@@lunosama you are right. I finished realizing it only 5 minutes ago. What is true is that it is not weary well explained. Anyway, thank you very much for your comment

@@pierreortais3306 no worries. Glad it helped

You have to type the model name in their website. You'll find all the instructions and codes there

Thank you very much , but we have done this on their site . miniTank Robot upgraded V2. Nr KS0428 . Could not find any code. The tank is ready to drive but the code missing .

Same problem as I have

@@inekelindeman8416 just a second. Lemme find the link

@inekelindeman8416 this link will lead you to their code package. It's from the official site www.dropbox.com/sh/yfip8hquyfmi54m/AABKg9NwAfz0v0mE1xK_vmVHa?e=1&dl=0

Yeah, personally, I make less typos on low profile Keyboards, but the sound, cherry profiles the base standard now

Are you saying the keycaps get stuck and doesn't come up after pressed ? If that's the case, it must be your switch. Try swapping the springs of your switch to a 70-80g spring. That's the cheapest alternative to make it work instead of purchasing a whole set of heavy switches.

@@lunosama No, the switches bring it back up easily, its literally the cerakeys caps lock is too far to the right if that makes sense? It just doesn't fit on the board.

@Squander. ahh. Got it. There are 2 ways to put the caps lock switch. Did you try both ways?

@@lunosama No, that's probably it, I'll try it

@@Squander. yeah hope that works

You can type the model name in their website. You'll find all instructions and code there. Sorry for the late reply