![nate clips](/img/default-banner.jpg)
- 105
- 182 666
nate clips
United States
Registrace 16. 10. 2006
Thanks for checking out my channel!
Glock MOS zero shift issues and how I fixed it...
This is a video explaining some red dot zero shift issues I had with a Gen 5 Glock 45 MOS. Ultimately, the stock/OEM mounting plate eventually bowed and slightly warped laterally causing the RMR to move around, no matter what I did. Problem was solved with an aftermarket plate.
Gear I use to make videos:
-Lumix S5IIX
-iPhone 15 Pro Max
-DJI Pocket 3
-DJI Osmo Action 4
-DJI Air 2S
-DJI Mic 2
-Atomos Ninja V
-DaVinci Resolve
-Neewer Tripods & Lights
-Kondor Blue cage & mounts
#Glock, #glock45, #GlockMOS, #DPPplate,#C&Hplate, #TrijiconRMR, #RMR
Gear I use to make videos:
-Lumix S5IIX
-iPhone 15 Pro Max
-DJI Pocket 3
-DJI Osmo Action 4
-DJI Air 2S
-DJI Mic 2
-Atomos Ninja V
-DaVinci Resolve
-Neewer Tripods & Lights
-Kondor Blue cage & mounts
#Glock, #glock45, #GlockMOS, #DPPplate,#C&Hplate, #TrijiconRMR, #RMR
zhlédnutí: 69
Video
Initial Review of the Formlabs Form 4 printer....is it a worthy successor? should you upgrade?
zhlédnutí 3,3KPřed 2 měsíci
In this video, I review what makes the new Form 4 different from the Form 3 and discuss whether or not you should upgrade. Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 3 -DJI Osmo Action 4 -DJI Air 2S -DJI Mic 2 -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts #Formlabs, #Form3, #Form4, #3dprinting, #StereoLithography
2023 camera upgrades...which cam upgrade was best? which upgrade sucked?
zhlédnutí 120Před 5 měsíci
In this video, I discuss all of my camera upgrades in 2023. I quickly compare and contrast them, rank them, and display some comparison footage. Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 3 -DJI Osmo Action 4 -DJI Air 2S -DJI Mic 2 -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts #Lumixs5iix, #iphone15promax, #pocket3, #osmoaction4
We visited Damajagua Falls in the Dominican Republic
zhlédnutí 80Před 5 měsíci
A cruise excursion in the Dominican Republic, we drove side by sides, then took a pretty long hike (uphill) to get to the falls. There was a fairly long wait to get through the first jump, but things moved fairly decently after that. Overall, a memorable excursion, but the hiking sucks. The meeting place for all of the excursions was also a total shit show. I'll elaborate further in a future vi...
2024-01-05, Rosemount 5B plays lightning during halftime of the RHS boys Varsity game.
zhlédnutí 33Před 7 měsíci
Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts
2023 12 10 hayes highlights
zhlédnutí 54Před 7 měsíci
Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts
2023 12 16 hayes highlights
zhlédnutí 33Před 7 měsíci
Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts
We visited Medievel Times, in Schaumburg, Illinois.
zhlédnutí 39Před 7 měsíci
Visiting relatives outside Chicago for Xmas, we stopped by Medievel Times, an establishment we must have driven past 50 times, always wondering "what was in there?".... I would describe it as a mix of a Renaissance Festival and a dinner theatre. Good fun for the whole fam. Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninj...
DJI Pocket 3 reaction video...was my prediction close?
zhlédnutí 130Před 9 měsíci
In this vid, I react to DJI's Pocket 3 announcement. I had previously made a video, discussing what I wanted to see in the next gen Pocket 3, in November of 2022, which can be viewed here: czcams.com/video/O7UAqY61zNU/video.htmlsi=BloYy36Oo2WH4vtS Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninja V -DaVinci Resolve -Neew...
Sig P365-XMacro grip module mod
zhlédnutí 1,4KPřed 9 měsíci
In this quick little vid I discuss why I wanted to make a little modification to my Sig P365-XMacro grip modules and how I did it. Gear I use to make videos: -Lumix S5IIX -iPhone 15 Pro Max -DJI Pocket 2 -DJI Osmo Action -DJI Air 2S -DJI Mic -Atomos Ninja V -DaVinci Resolve -Neewer Tripods & Lights -Kondor Blue cage & mounts #Sig, #SigSauer, #P365, #P365xl, #P365XMacro
Is recording to a SSD over USB-C worth it? I made a custom SSD handle-bracket anyway...
zhlédnutí 12KPřed rokem
Is recording to a SSD over USB-C worth it? I made a custom SSD handle-bracket anyway...
Kondor Blue Swivel Tilt Monitor Mount_Hack
zhlédnutí 258Před rokem
Kondor Blue Swivel Tilt Monitor Mount_Hack
Lumix S5IIX Initial impressions and sample footage
zhlédnutí 2,3KPřed rokem
Lumix S5IIX Initial impressions and sample footage
I made a chest rig holder for a Baofeng UV-5R.
zhlédnutí 546Před rokem
I made a chest rig holder for a Baofeng UV-5R.
2023 spring break....Vegas & Southern Utah
zhlédnutí 116Před rokem
2023 spring break....Vegas & Southern Utah
Sand Hollow in Utah. Drone footage (Air2S)
zhlédnutí 155Před rokem
Sand Hollow in Utah. Drone footage (Air2S)
CNUGGET is the lone survivor in this Resurgence match, channeling Michael Phelps for the dub-ski.
zhlédnutí 23Před rokem
CNUGGET is the lone survivor in this Resurgence match, channeling Michael Phelps for the dub-ski.
No comms, No problem! Without operational communications, I still help my squad take the dub!
zhlédnutí 26Před rokem
No comms, No problem! Without operational communications, I still help my squad take the dub!
More LWN Duramax fun!! Fixing/addressing the P20BE code in my 2016 GMC Canyon 2.8L Duramax.
zhlédnutí 2,1KPřed rokem
More LWN Duramax fun!! Fixing/addressing the P20BE code in my 2016 GMC Canyon 2.8L Duramax.
COD Resurgence Victory...with inspiration from Tom Berenger
zhlédnutí 30Před rokem
COD Resurgence Victory...with inspiration from Tom Berenger
First game on, and it's a COD Warzone Win....in honor of Joe Biden's SOTU
zhlédnutí 37Před rokem
First game on, and it's a COD Warzone Win....in honor of Joe Biden's SOTU
canedbs Strikes Back! Left for dead, canedbs clutches up for the dub.
zhlédnutí 45Před rokem
canedbs Strikes Back! Left for dead, canedbs clutches up for the dub.
Vicseed MagSafe Rear View Mirror Phone Holder
zhlédnutí 422Před rokem
Vicseed MagSafe Rear View Mirror Phone Holder
Another COD Warzone 2 Mini Royale Trios win
zhlédnutí 21Před rokem
Another COD Warzone 2 Mini Royale Trios win
canedbs carries us to a COD Warzone 2, Mini Royale Trios dub
zhlédnutí 21Před rokem
canedbs carries us to a COD Warzone 2, Mini Royale Trios dub
ScalarWorks Leap/08 30mm Scope Mount. Unboxing, first impressions, weighing, and installation.
zhlédnutí 3,7KPřed rokem
ScalarWorks Leap/08 30mm Scope Mount. Unboxing, first impressions, weighing, and installation.
Part of the issue might be the plate
What a nice video. Thanks bro
Tengo una Chevy Colorado y me iso eso mismo y nose que hacer si cambiarle los sensores o que ?
Anyone know where to get a thin tube replacement for this extractor #24397
I would measure the tube and look on McMaster Carr…
@@natetran thks..jc
Howdy! Any issues with cracking or otherwise?
No, but I don't have enough rounds through it to make any judgements on durability. With this particular build, I only have 500 rounds, or thereabouts, through it. It's held zero perfectly, for what it's worth, but as I said, not enough rounds through this setup yet. (I've been putting more rounds through my suppressed 11.5" BCM)
I actually wrote some of the firmware for the Form 4 wash station (see if you can find the easter egg😉). Glad you like the system!
I had to cheat and look it up....3-6-7-6!!??
@@natetran haha yeah, that's it! if you beat the game you'll see my name in the credits 😃
@@zachbrown7272 I guess we’ll see how many wash cycles it takes me. Thanks for sharing!!
The fan noise increase is due to the uv leds needing much more cooling than the laser system did. I have 2 Form 2s, 2 Form3 and a Form 3L and I may have hit the end of the road with formlabs with the Form 4. There is just way too much competition in the lcd based printer market for FormLabs to charge this much for the printer. The Form 4 is an 8k lcd which is far and away a great unit but there are now alot of other printers that have 14k lcd screens and cost in the 500 dollar range. The open source resin markets have improved so much with companies like loctite making engineering grade materials for these lcd based printers. Also the film on the trays will need to be replace with a fair bit of regularity just like the older trays. From the appearance it looks to be an nfep material with will still over time break down and have ghosting similar to how the laser based printer films degrade.
thank you for the informed response! I'll look into some of the things you mentioned.
You make an excellent point. In terms of qulaity and functionality overall tech you cant really compare Formlabs to these 500 printers but you definitely can to the Heygears Reflex and thats half the price for the complete kit and an amazing printer. I cant understand how people are paying these prices I would rather buy a few of the different brand 500 printers!
@@julieta203 you make fair points, but as a U.S. based medical device company user, there are reasons why I would not/could not use some of these other companies…….
The LCD resolution in the Form 4 is 8k? I thought it was 4k since one video said 50um pixel size is quite a sweet spot for the resolution vs. light intensity.
@@starride4530 You are correct the Form 4 is a 4k screen. I talked with Formlabs at Rapid this year and they also confirmed it was only 4k. They swear that they are doing some magic to somehow sub divide that pixel down to achieve a lower pixel size, but to me it sounded like image blur and AA like how Chitubox has it. Even at 4k resolution the details should be great and crispy, but I would still choose some of the cheaper 8-12 options out there. If I was to still stay in that level the new Heygears machine had amazing print results from what I saw at Rapid and it comes in at under half the price of the Form 4 and it comes with wash and cure stations for that price. Heygears had some very nice resins on display and the feeling of the resins were extremely hard with an almost ceramic feeling. Not sure if they are achieving that hardness by over exposing the layers though.
Wow 33 mpg, I’m impressed. I get maybe 25-26 mpg with my 2016 2.8L diesel Canyon. It seems to run fine other than my mileage discrepancy. No dash lights. I was curious if your truck has always done that well mileage wise? Thank you for your time.
I’m at ~157k miles currently. I have not reset my “A-mpg tracker” which is just shy of 27mpg; this of course includes winter driving where I will use 4WD from time to time, and will let the truck run and idle much more. This also includes towing a small trailer and/or our 28’ camper from time to time. When I commute to my current office (~90 mi round trip) it’s mostly highway, and I’m usually just putting along in the slow lane. So it could very well just be that I drive slow. I do like to keep my tire pressures relatively high, usually around 38-40 psi. One other note... I did take my front air dam off….i swear it dropped efficiency slightly, but I have no controlled data to actually prove that.
Can you tell me how tall it is the overhead shot arm or overhead size? Is it similar to the one which is 79 inch Neewer?
around 20" or so
@@natetran You mean 20 inch or 20 cm?
@@MyLanguageNotebook inches
@@natetran Thank you so much
I like the top version. Any chance you sell one? Needs to fit any enclosure.
Thanks for the comment. Unfortunately it just isn’t cost effective for me to produce them.
he dead. RIP
He not looking too alive 😬
Squirrel looking at him like my backs broken kill meee.
Atleast nothing was broken and it was just a silly squirrel
I guess the working theory is that “hey buddy, the squirrel“ got up in the belt and made it pop off?
Well, the belt was a bit “squirrelly”…..but yeah that’s the theory anyway.
Just ordered one a couple weeks ago.. 🤞🏼
Hi can you help me , is that sensor the one that read the DEF level as well? I have a Colorado 2016 and I need replace the DEF LEVEL SENSOR
great question....i'm not sure....i'll ask my mechanic brother.
Can Sony camera 📸 use usb external ssd video recording?
This is awesome!!
Can't you plug it straight into the mic input on the side?
I have a Sony FX3 and i really want to use an SSD card to record all my videos and im looking for something like this. Will this work with my FX3?? I love the idea of using it as a handle and being functional for an SSD at the same time. Awesome idea. Please let me know if this can be used with FX3 and if there is a link to buy it. I honestly was looking for an CF Express typa A memory card alternative.
Thanks for the comment. I made this as a one-off for my own usage with the LUMIX S5iiX and the Kondor Blue cage…I don’t know the FX3 at all….does it have the option to record directly to an ssd over usb-c?
@@natetran I just got the camera and i am very new to this. I will have to do a bit of research to find out. If its possible to do so what SSD you recommand and id love to order your handle to be able to insert the ssd
Sadly most camera's don't record to SSD drives (including the FX3) but there has been "workarounds" using adapters, such as this one from Tilta. It wasn't cheap though, but the concept was certainly a good idea. czcams.com/video/IZ3-hZ332BA/video.html
They made a sig 1911 Multi Cam holster for me, probably the nicest kydex holster i have. Really good customer service too.
Did the countdown to limp mode automatically clear after you replaced the line or did you have to clear it?
So, the limp mode warning on my dash was going in and out, depending on what the weather was doing....it was getting below freezing and the code and limp mode warning would activate, then it would warm up and the code and limp mode warning would go away. At the time of the line swap, it was warm, so I had no code/limp mode warning. After the line swap, I haven't had another code/limp mode warning since.
Thank you for the videos, @natetran! Stoked the holsters are working out!
Thanks for the video, I have the code, gonna crawl under the truck tomorrow to investigate before ordering the part! Thanks again.
best of luck!!
Cable Guy
Why 1.57 and not 1.93?
For an lpvo that I’m not going to be passively aiming thru with nods, I prefer the cheek weld with 1.57…
Had the sae issue thank you for making the vid
hopefully it helped in some way!
👍👍👍👍Can comfirm that using the DJI Mic with the Osmo Pocket 2 via the 3.5mm from the receiver to the Do-It-All Handle works perfectly. It will run both mics from the receiver, It will disable the interal mic's and the standard mic that comes with the pocket 2. You can still hear your feed via the headphone output on the RX. I bought the Mics because I wanted the backup recording that they offer because I wont get a second chance for a do-over. Using Adobe Premier Pro I can easily sync the tracks in seconds. 👍👍👍👍👍👍
Going through this now. Great video. Would be great if you could add the GM part number. Thank you!
go to this timestamp: czcams.com/video/eiwns_ffINk/video.htmlsi=1GgbxkeZy4ql1CNA&t=152
8490-4153
This guy is a bit of a nut
Nate the Oracle
Grandpa Minh FTW
So, can u tell more how it works with nvme? All is good? No any issues? Did u try to record long files? In 6k 1.9gbs
I have not had any issues, however, I have not attempted to record very long videos to the SSD; I usually use my Atomos NinjaV. What's really nice about the M.2 NVMe drives is that they are so fast, you can edit straight from the M.2 NVMe drive, which is very nice when recording in low compression codecs, such as ProRes. I have verified that the 6k open gate functionality works over USB-C/SSD, but have not done much with it. My preferred work flow is to always record to the Atomos Ninja V, but I am going on a cruise in a few months and will most likely revert to the smaller profile setup, and use the SSD and not bring the large cage handle and Ninja V.
@@natetran thanks. It’s a great idea use nvme. Looks fantastically. Thanks for help 🙏
Very nice combo. I have the same setup
super helpful thanks.
Dude ... Thanx...
I have a DJİ Mic but Lightning adopter is broken and I cannot found new one. Does DJI Pocket 2/Osmo iOS Pocket work with my DJİ Wireless Mic?
Great tutorial. I wish my S1H could record to USB - this is the only thing I am really missing with this camera.
Little update: I took advantage of the 2 little screws to fix the tension, and so far it seems to work fine - let's see how many tilt movements it lasts. Apart from this little 'inconvenience', I love my Kondor Blue rig so much. Just yesterday, I adjusted it to work on both my shoulder and on my tripod: therfore, I slid the camera more to the front (of the rods) and mounted a tripod plate under the camera base plate. The shoulder pad goes to the rear part. Yes, this adds some weight on my arms - but now I can watch the picture from the camera viewfinder and the top monitor mounted to the rear of the handgrip on the cage.
That is awesome. I subscribed to your channel.
@@natetran Thanks so much! Highly appreciate your comment and subscribing. It's just a 'for fun' channel only - but I like sharing some of my experience and knowledge with the community because the community gave me so much.
Awesome hack! I also ordered the big shoulder rig for my S1H because of the great design and the versatility - but I feel pretty disappointed with the monitor mount with its tension screws losing grip after 2-3 monitor tilting movements. also, the small fixations screws seem to be with limited effect. Your hack will be my solution, too!
I’m glad this helped someone!
Thanks for the video man, that helped a lot, i have a pocket 2 the creator combo, but I've been doing a lot of interviews lately wanted two mics
I did not buy the Creator Combo of the DJI Pocket 2. I didn't get any mic included. Can I simply buy this Mic? Or is there something extra I need for the Mic to work on my camera? What I mean more specifically, Do you need some kind of Wireless Reciever that you attach underneath the DJI Camera, the same place where you for instance attach the tripod mount. Or is this wireless receiver already embedded into the DJI camera?
you can. it depends if you have the "Do it all Handle" or not. if not, you will need to get a USB-C to 3.5mm jack adaptor. if you have the handle, you can just connect the DJI mic transceiver to the Pocket 2 via 3.5mm cable.
is there any way to use external ssd and usb charging simultaneously? is there any adapter or dongle to do so?
great question. I don't know if such an adaptor exists....maybe?
@@natetran probably panasonic can make one for this purpose
No! You did not!
Great vid bro. Is there a update on the pocket 3
From the rumors I’ve seen, looks like DJI will release a new action cam before a Pocket update…
@@natetran thank you very much can't decide between a go pro or a DJI for out door recording any advice or suggestions
@@Yaseen_KhaliqI’m biased towards the DJI ecosystem, but I have used the DJI Action 3 at my work and it’s quite good. Rumors right now are that DJI will unveil the Action 4 by the end of July….if it were me, I would either wait for the DJI Action 4, or buy the Action 3 when they reduce the price.
Great work and well designed! Are you thinking of sharing the design on Printables or Thingiverse by chance?
hi mark. if you'd like a .stl of the file, send me an email and i can send it to you. thanks. -nate
@@natetran thanks Nate, I don't have the camera yet but if I do I'll reach out, thanks so much for the offer
@@natetranhello. Also will be glad to get .stl model. Thanks
@@kaktamdela I just uploaded a .zip file containing the (2) .stl files in my google drive...see link in the description. Anyone can download this, feel free to share....I will remove it from my google drive in a few weeks.
That is very nice. I really love the idea. Great job man!
Nice! Congrats on the new camera!
The cage you guys make is awesome!
Hi Nate, this video shows how to properly lock in your tension with our monitor mounts: czcams.com/video/kyZc3HI0T08/video.html You have to make sure you are using the additional set screws after you set your tension (4 screws total). Once you set it right it will blow your mind! Never needing to tighten ever again! By the way stoked you love the S5ii cage!