Video

I have the exact same problem with mine it's identical to yours, I was ready to buy a new one, it's a pretty good saw and works well, I've had this saw for more than 20 years, except one day I went to use it and I got nothing, my new Kitchen project starts in 2 days so your video was a great help and saved me $300.00 - $400.00 Thanks you are the best!

I will try once with the drilling into it and pulling it out. If it doesn't come out, forget it. This is the second time I had an issue with it but I didn't know it was the aluminum reacting to the battery. It was a great light

Okay, your video saved me killing myself over $27 flashlight

I took mine apart a little more. I unscrewed the long shaft. It holds two batteries

Okay, it sounds like the aluminum doesn't work with the battery and that's what causes it to leak and stick and corrode

30 minutes to change a battery

This is the exact flashlight that I've got a battery stuck into and it's a great light but it burns too hot and leaks and sticks

way better built than the Chinese junk nowadays.and it has a nice sounding ballast! i have seen this issue plenty of times.

I'm looking for that black cove,r do you know the part number of rhe cover thanks

Mmmm same issue here, I'm gonna try one of these days

Where is the cabin filter ?

Thank you for the video. I'm guaranteed to not make the several mistakes you made. Was I the only one screaming "BRIAN, stop taking the blower shroud off!!!" The pipes are underneath it not in it!!! " Somewhat painful to watch. Extensions with 7/32nd and 10mm is needed. And a little common sense. Don't take doghouse off. Don't dismantle blower assembly. Dont remove battery. Made this so much more complex than it ever needed to be.

I was looking for video and I found your, I follow your instructions, I take 5 hours to replace.the mecanic ones charge me 650 laibor and materials thanks for the great video, may 2005 Chevrolet express is back to life. … don’t ever use water on radiator is going rusty

So I have one of these same saws, switch is fine, but the bolt holding the blade guard on was frozen and some idiot I leant it to broke it. Any idea how to fix that? Maybe I need a screw extractor on both sides, but what is the part to replace it with?

Hi, I have a wet saw. do you happen to know what can be done if it's difficult to push the table to cut the tile? There is a cylindrical rod and a track on it. I am guessing that the cylindrical rod is not allowing the table/tray to slide freely. Should I add some lubricant to allow it to slide easier, or is there anything else that can be done.

Sounds like crap!!!

I love the way the camera guy says “we” fixed it. 😂

I picked up one of these a couple of weeks ago with 2 sp120 folding panels for $524.50 on an Amazon flash sale new from Bluetti. So after deducting the sale price of the panels the eb240 was $244. I put 600w of $55 100w JJN 9bb panels in a 3s2p array and I’m getting 525w into the eb240. This runs my fridge off grid 24/7. Very happy with this setup.

I JUST REMOVED THE RIGHT FRONT TIRE AND A RUBBER FLAP THEN REMOVED THE 2 HOSES FROM UNDERNEATH. DIDNT DO ALL THAT U DID

With these constant power autotransformer ballasts, that capacitor is the main ballasting impedance for the lamp (the choke part of the ballast acts as a saturable reactor which forms a tank circuit with the cap that drives the lamp with a square wave drive current waveform). The reason that the lamp isn't striking with a failed capacitor is due to the capacitor capacitance being way too low, and thus there is insufficient drive current to establish a steady arc in the lamp. What can also happen is that the cap fails short, in which case the lamp will be grossly overdriven and thus probably grenade; the ballast is usually also fried when this happens as it can't limit current on its own.

It convinced me just to pay somebody to do it

4yr old video and got me out of this exact jamb. Thanks!

😃😃😃

Just did this with a flashlight that I’ve had for over a decade. It lit on fire and made my garage smell terrible. 10 out of 10 would not recommend lol.

it's not a clock spring it's a recoil starter rewind spring

You guys miss the point, The EB240 is purely about Off Grid Power and Emergancy Backup, the AC200 is Taylor Made to suit every Day Life, The EB240 has Industrial Build Quality with it's forged/Extruded Alloy Case and the AC200 Is all plastic, In an off Grid situation a person would be running Low Watt Appliances, Oh and the EB240 will run any house hold fridge freezer, You don't need a Touch Screen to get you through a PowerOut, That is just another thing to go wrong, The EB240 is all about power In and Power Out and if you need more sockets then just use and extension power board, The EB240 is a Work Horse, the AC200 is about style and craming as much as possible in to one box, Oh And The EB240 has Automotive Pouch Cells in It, Given the Choice I would Buy 2 of the EB240's Over the AC200, In fact my Brother bought 2 of the EB180's and 2 of the EB240's for a total of 8400wh, And yes they did make an EB120 and EB150 and the EB180 and the EB240. Hooking a Tesla up to a SoGen would last me about 6 months Now that is something I'd really like to do, Well done Guys great Video.

Tradução em português

My unit shows JJ where yours says EH. Any thoughts?

Hell yeah! Thanks for this! Just what I needed

Great Video I have a 33 bottle wine cooler with a L 1 error code any suggestions. Newair is useless. Sold me a new Temperature control board, no change

We can't stop here - this is bat country! Helpful video, thx

You need to hook up the car with a step up buck and boost D.C. 12v to 24V then it will draw double the Watts into the Bluetti. 200W instead of 100W. Just like I do with the EB70 on the YT channel @ebikecnx7239

I got this exact saw a few months ago and the switch messed up on it. Luckily it’s stuck on currently. I like to view videos of people pulling the machine apart before I do. That way I got an idea of what to expect.

Always remove the head ..just to be SAFE😂😂

Them wasps been busy at it 🙉

You probably need a new belt

Thank You

How hot does this get? How does it compare to incandescent?

Bluetti User Manual: Do not use this unit on the go Also Bluetti: provides a car charging cable I mean yeah, you can launch your engine while not going anywere, but it's a waste of fuel in my opinion

Had to do this same thing with a different flash light(still AA battery tho). I used a drill bit first then a skinny lag bolt. I thought the drill bit/lag bolt might cause the battery to expand creating more problems, but it worked like a charm.

Had the same thing happen to the exact same flashlight. The problem is... they used some kind of epoxy in the construction process and it's all over the inside of the battery housing gluing the batteries in place.

I feel so bad watching you guys struggle with this. I just did this job today and It took about 2 hours. All i did was cut the pipe on the inside. I pulled through the the firewall and removed those clamps. Installing I used a worm drive clamp and a long extension with a swivel to tighten them. Theres no need to fight this job or remove the evaporator.

This man reminds me of my beloved grandpa, God rest his soul.

Great tutorial! Do you know what a "L 1" error code on a Newair wine cooler 🙃model NWC033SS01 indicates?

Do you have a link to part 1? I tried looking at your video list and could not locate it. Thanks!

What about servicing the transmission with the 00 grease? Thanks!

The EB240 last longer with a bigger battery capacity and a smaller inverter. I have the EB240 with the smaller inverter and the Bluetti AC200 max which has a larger inverter. I get more run time with my EB240.

Hey Vern ? How about a manual ?

But for how many hours? On one bluetti

Hey Vern.