Video

Surely pulling it out 1 ring will make it work as it’s still analogue based

im having my own fun time, except my blown in insulation thats probably 30 years old also has a billion roofing nails and tons of wood slivers in it from a roofing job.

This is V6 not like v4

Walmart Automotive counter is one of the cheapest places to get that battery

I guess these Iron Mans are all different. I saw one of these videos yesterday and I thought I can do that and went out and got a battery this morning. Getting the 4 screws from the back off. Piece of cake. Getting the back off without taking off at least one side of the strap. NO WAY!!! Then after I got the back off replacing the battery was easy. But trying to put the back back on? The rubber gasket had stretched or something so trying to get it back in place to screw the back on was just not possible. I tried putting the back on loosly and tried to coax the gasket into position but it always popped out somewhere. Then I said I will just cut off any excess gasket that wouldn't jam under the cover realizing the watch will no longer be waterproof. Then trying to get the band back on I finally gave up. I didn't want to jam a screwdriver into my hand trying that challenge. I had bought a new watch yesterday but still wanted to try and keep the old one. It now has a home in the trash can. I admire guys that can do some of these repairs. Fortunately I am in a financial position to be able to afford a new watch. 😀

0:59

The shifter with a factory floor console had a metal tab welded to it so you can attach a white plastic rod to it and the shifter position indicator so when you put in park , reverse or drive , it lights up what position your in . I welded on a tab for mine to work . Trying to find a factory shifter with that tab is hard nowadays.

Do they have cabin air filter? 2007

Why do they sell this crap if its dangerous?

Hey! I was wondering if you would allow me to feature this video for a youtube edit that I'm workling on? I'll credit you with watermark on scree. Thanks in advance.

Looks like a case of Fuck Around and Find Out. Open and shut.

hi there, may I feature it too?

Hello! Can I feature this video for a youtube edit that I'm working on? I'll credit you with watermark on screen. Thank you in advance.

that is OLLLLLD school! I love it!

Ive tried the potato chive bake.Its good but I like the bacon cheese bites better!

super useful

I’m getting ready to install the Monroe

You missed the light housing housing. I'm stuck and afriad to pry any harder

Great video!

thanks man i hear ya

THAT BUBBLE LIGHT IS FOR THE BARN DOOR STORAGE AREA LIGHT

Thanks!

Would y ou happen to know if a 677 mustang am radio 8 track player will fit the hole in the lower console that had originally come with just a am radio?

Great tutorial. Easy and to the point.❤ What more could you ask.Thank you sir .I just subscribed.

I have a set of air shocks on my 1964.5 mustang. I deleted the air shocks because they were very old & leaking (previous owner installed in the late 1980’s. Everything was good w/ regular gas shocks until I upgraded the wheel size to 16 inch. Then when carrying back seat passengers, I began to get tire rubbing… Found a new set on Rock Auto for just $150 & have never looked back. Tried replacing the old leaf springs first to a 5 leaf HD set, but had an occasional rub on big bumps. In my opinion, yes it’s very old technology, but I don’t feel a huge ride difference & I know that anytime I have backseat passengers I know I can save my tires!

Thankyou for the video

Looks like you did a great job.

Thank you

It’s also cool because now the middle school has had a huge addition to it, and the cafeteria is right where that baseball field it right now

I run on the track team for the middle school here. I think this is really cool seeing how the ball fields and the track looked like before I came here and seeing what they are now.

Thank you for documenting your DIY!!! You’re a #adulting freaking rockstar!!!

Thanks. Btw, your car looks so clean and nice. Greatest

I just loosen the spring clip screws with a small screwdriver enough to get bulb out.

Will you come put my lightbulb in 😂

Which model timed was this?

Thanks. Good video. In the end, the inside of my Timex Atlantis 100 looked quite a bit different, with a different type of interior cover holding the battery in place, but it didn't matter. Your video gave me the courage to open up the watch in the first place, and once I did that, it wasn't that hard to figure out.

Dads need to be dad's &Moms need to be mom's Attention: The following is for well you know..if you don't keep reading... Stop. 🛑 Were made in HIS image. HE made us with the power of free choice A good prayer: I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS. Romans 10:5/10 ct...❤️k JESUSisLord!Amen... Amen.. If you'd like to call someone who cares 83 For Truth. bc you don't know when you'll die? .y r u hesitant. .... ... .

Should you have a filter on the heat pump and on the returns in the ceiling?

Make the video when you have time, duh

Thank you so much!! About to change my lights and this helped so much 👏🏻✨

Thanks! The Walker rebuild kit has a link to a good install/adjustment instruction sheet. Very good illustration to adjust after building. There is also a cute little cardboard ruler that is very handy.

I always take a Q-Tip with rubbing alcohol to clean the grit and schmutz around the back case cover edge so it doesn’t foul up the neoprene waterproofing gasket that seals the watch.

No disrespect, but that's one of the most open, easy to move-around-in attics I've ever seen, and for the time you took putting together that vacuum system, you could've spent that time simply shoveling that cellulose into very large contractor-size plastic garbage bags, using a narrow snow shovel. Finish up with a broom/long-handled dustpan. Also, if you're not going to air seal below where the cellulose is/was, there is no point in removing it. Just put insulation on top of it. That's my two cents. But the finished product looks great, and you did it your way, so well done. Suggestion to anyone watching - wear a p100 mask (or better) while working in an attic. I would wear full PPE, personally.

Anymore they don't come with instructions just a qr code for info online. also if you can't do it off of what is on the paper then you probably shouldn't be opening a carb in the first place. I run a business rebuilding carburetors and too many times have I gotten them with the customer saying "I got a kit and rebuilt it and it didn't run right afterwards"

i'll be rebuilding a 8007/4160 390CFM do you know if its kit 37-119 or 37-720? i can't figure out the difference

My attic has a lot of debris like cut electrical wire, nails, dead rodents, etc. I'm concerned a dust collector will be destroyed before I finish the project. Did you have any of these issues?

If you want a surface flat use a piece of glass.

Puedes traducir el comentario en Español seria excelente.

Why make a video if you don't know what you're doing?

I do inso aswell love the vibes man anxiety messes me up when I’m roofs ur chill calm voice be doing more then you know man