Video

This is the biggest hurdle I have with GDT. Lots of examples how it works out. I have to see it to understand it

Masterclass

thanks but something is wrong. You make the part pass the inspection.. Not give the correct form or necesseraties.. such as you sad "carefully use LMC" that couse of lack of yellow ring. This is not a solution or unique cause of using LMC or MMC

Thanks for explaining shift concept & concept of Virtual condition help us to have Inspection pin of virtual size.. thanks cleared doubts 🎉

I learned a lot from this especially up to the 30 minute mark when it changes to the brake disk example on MMB. For the first part my Position calculations don’t match and range from 0.89 to 1.366, however using the same maths for the second part with MMB applied they do match the 1.000/1.001 figures from the software. I don’t understand this part, any help would be greatly appreciated?

Thanks!

thanks

Excellant

Brilliant stuff

Wow I think it’s very interesting it looks like a person could learn a lot especially with the mechanical background and I truly hope I didn’t offend you with a little difficult with your accent and you’re talking real fast but apparently you’re very intelligent so I hope I did not send you God bless

The interruption make this webinar so bad, this is the example 16:50

The CAD/CAM/CMM Professionals all will benefit from the 6 steps with "Dimensional Management" as an overview with quality-GD&T functional design. You gentleman are very good with history to current digital CAD to CMM management with "Geometric Tolerancing Technology"...Thanks! T J (Tom) Vanderloop, Author, Technologist, & Design Consultant: AWS, & SME-Leadership

Best explanation. Thank you for this wonderful video!

Good job

perfectly explained!!

Thanks a ton! These are just gold..

You guys are the best.........this is what I was looking for years to think gd&t this way.🙏

Hi, Thanks for sharing this vedio. It will help us alot. After 37 mins, When we use MMC in datum B also. I didn't understand the method and result of using it. It would be so much helpful if you help me out to understand it.

Love this. I'm a Mechanical Design Engineer in the Aerospace industry. This Webinar gives a good understanding of things to consider when designing parts.

Excellent Webinar... You cleared all my doubts regarding LMC, MMC and RFS... Thanks a lot...

Wonderful Lectures ! Thanks.

Unable to get the MMB concept properly, can anyone give link to video which explains is with practical example?

Your video are very interesting. Greeting from Mexico

IS this ISO or ASME?

Excellent explanation. Thanks bro👍

Hello creaform, myself Karthik from India. I'm Willing to do intern in industrial metrology with you. I'm a quality control inspector with 3.5 years of experience.

I need to learn gd and t deeply

Nice job putting this together! I worked as a senior level design engineer at a rather large multinational company, overseeing a number of professionals and a rotation of young engineers every year. One thing I would recommend, especially to younger designers, is to spend some time and effort trying to gain a grasp of process capabilities. You can find general process capability indexes and such online, but the best source will always be your quality control department. If they employ a CMM then you have a good source of data to develop your own internal capability analysis. Knowing what your capabilities are, you can design around some of the problems you're going to face and for those you can't, you know exactly which components you may have to source from those who can produce them to more exacting standards.

Thanks a million for this 🙏🙏. It's such a powerful insight.

34:20 I can see at lot of cases that the B datum is marked with position tolerance relatively to A surface. In our case could we use perpendicularity either? I mean in that case they are the same, right? Do we have any advantage, disadvantage how it is marked? Thank you

Much appreciate for your effort!!

Thanks for understanding these concept very clearly...!!!1

My hope is that your organization keeps doing the GD&T Dimensioning and Tolerancing webinars. The graphics and the focus on actual parts & products (including functional tooling) is great. Keep up the efforts and the Chippewa Valley Technical College (CVTC) has all CAD/CNC/CMM technologies and it can be an asset to the curriculum for the Mechanical Design Technology, Machine Technics & Automation Engineering Technology to see your "webinars". T J (Tom) Vanderloop, Author Technology-Instructor & Consultant; ATEA, AWS, and SME Leader/Member Thanks!

Thank You for a Great "Graphic-CAD/CMM Validation" for the Modifiers MMC-LMC & Datum MMB. Please leave the webinar Video on line as the Students at Chippewa Valley Technical College, would benefit from your work! T J (Tom) Vanderloop, Author, Mechanical Designer, & Consultant; ATEA, AWS, & SME-Life Leader & Member

Thank you very much for the excelent explanation. I have only a question, hope it is no stupid. Could we apply a MMB without a material modifier? For instance, could we have something like ¦ DIA .01 ¦ A ¦ B (M) ¦ OR do we NEED to go to ¦ DIA .01 (M) ¦ A ¦ B (M) ¦? I hope I made my question understandable enough. It is quite difficult to replicate the symbols. Thanks!!!

Thank you both for the excellent explanation of MMC, LMC, MMB and LMB concepts

Hello Creaform team. I found this webinar very useful and I aspire to apply for a job in your company in the Europe based office/ design center. Please suggest where to apply and are the vacancies available.

très intéressant! seulement pour ajouter une information supplémentaire, il aurait été bien de voir le visuel avec l'ajout d'un N95, d'un masque de procédure chirurgicale et d'un simple foulard de la maison. Je ne sais pas si votre logiciel permet ceci.