Video

What a trash video. You are not able to install the brake pedal that way. There are brake lines on the master cylinder. Not only that Harley riders do not want aluminum.

Is that a gasket or a metal shim?

😂😂😂🎉❤❤❤❤❤❤❤

Very happy with my purchase! The mini faring looks great and is very functional on my 701 Enduro. My main objective was increased wind protection, and the little screen does a remarkable job at highway/freeway speeds. I also picked up a pair of the lowered footpegs for the 701, which have really helped make riding while standing up much more comfortable. Nice wide platform and I'm not nearly as hunched over. Very pleased. Thank you.

no music pls

Sick bike❤

Hello. What is the thickness of material?

Every product I've bought from you came with no instructions and this video was not that informative. I also found the same thing that Benjahnz noticed. I waited too long to install it so I can't return it, but I think I learned my lesson. You get what you pay for folks.

We're do I get one

Is the red bezel removable?

I think this one looks better than the one from AS and have one on order for my 701.

Just ordered these and a bunch of other nicecnc parts. Only thing I was sad I ordered nicecnc skid plate and it does not fit. Every other part I bought fits nice. (Extended clutch arm, brace, front clutch and brake lever, crash bars, skid plate, dash brace, engine cover

Hi, Great video! I have a question: Is the handlebar lever shown in the video approved for use in Germany? Also, I need a new star-shaped screw since I lost mine. Do you sell them individually? Thanks in advance!

Pretty bike

Which bike is that?

Why are there so few likes? It’s great

Looks the goods NIceCNC.

Under rated product it works really really good

Repent and follow Jesus

Real definition of sexy

rear hand break kit . yes please

I need parts specific to the xpro templar ❤

I know those part . 😅

Hey, will u do do aftermarket parts for yamaha superjet or kawasaki sx?( stan ud jetskis and etc) ?

I have a video of it on my channel showing all angles (on a dr650)

Looks like the hoses on the waterpump are mounted incorrectly and switched. The right hand side hose needs to connect to the cylinder, otherwise you will have an overheating problem.

What sensor are you using for the oil temperature in the dip stick hole

Hi, can you please make an installation video of your speed sensor elimination cap for Yamaha Raptor 700. Thanks

I purchased these and followed the instructions perfectly . All 4 rubber mounts on the bottom and 2 on top . Bolts tightened to the max . The rear fell off during riding and the front is wobbly so I removed it with my hands . Not a good product very disappointing

Got this and was pretty uninpressed with the design. For a start there is no depression for the spring to hook onto. It just digs into the log on the top of of the lever arm. Secondly the plastic insert that replaces the clevis has too musch stiction on the aluminium and causes the clutch cable to rub on the side of the cable housing. This rubbing which will lead to premature wearing. I removed mine aftrer installing it and threw it in the trash. Lesson learnt, get the real thing from Camel Adv.

🔥🔥🔥

ordering the transparent clutch cover for my xr650 next week, can’t wait, wish i could order everything lmao!

Does this fit the 660 raptor?

I installed them exactly like shown and with orings yall supplied and blowed oil everywhere what a waste of money... put my stock tubes back on and no leaks....

Will it work on a raptor 700r?

Very cool! 💪🏼

Eu quero

Hi, a question: why does a part of the frame remain uncovered in your kit, between the small upper piece and the large one below?

But how to remove the OEM part?

I gotta get one for my trx450 🔥

Perfect length!

can yall do an install video of the universal atv light bar and bracket mount for the handlebars

What was the torque too?

I just ordered a bunch of nicecnc parts a skid plate, water pump cover, rear rack and a few other bits. I wish I could buy even more goodies. It no room in the budget at the moment

Just bought one and installed on a gen 3, this thing makes a HUGE difference in clutch pull. Literally can use one finger to pull clutch in, also makes it easier for the wife to use. However, I'd recommend to do a few things before installing, it makes it a lot easier. Before install, the video doesn't show you to remove the heat shield and oil cap, plug that oil cap opening with a clean cloth, paper towel, or cover with painters tape so you don't get anything inside, you'll have more room to work with. Then, when you do disconnect your clutch from the bracket, be mindful of your coolant hose that your clutch cable is pulling against. It sits right in between your 2 coolant hoses and you may need to re-route your clutch cable if you have a taller set up or off set handle bars. I could get away without moving my clutch cable around but I did it anyway as it was a little tight against my coolant hose after install and for piece of mind. I added a dab of tread lock to the little screws just in case with all the vibration and only tighten down a tad or you'll strip the screws. After install, tightening down your screws and nuts, re-adjusting your clutch cable slack, your good to go! If unsure of your clutch plate friction you can always take your oil cap off and look at it while pulling and releasing the clutch to see if you have enough bite or need to adjust. Safe ride out there all! 🤘

This will work with a 11/8 pro taper fatbar?

That is a lot of awesome parts. The video would be way better with some narration describing the part being installed, instead of the terrible music.

What’s the torque on those two screws ?

Are they much heavier then the original sub frame?