Video

Anderson connector

Would this help in a no start no crank situation?

Hello do you have WhatsApp i have questions thank u

What part numbers for the one you used 🤔

Anyone here tried with the 900 cc shiver?

You had an Aprilia shiver 750 I just got one 2009 Aprilia shiver 750 don't know how or if you can lower take off speed I put 1st gear let off clutch slowly and bike just takes off to fast without giving any throttle at all is yours like this How could I fix this?

I recently needed to run guzzidiag on my 2014 dorso 750ABS. I ordered the Goliton cable, which did NOT work. I ordered this instead which IS the correct plug and pin setup: [url]www.amazon.com/gp/product/B07QBXZHLD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1[/url] Happy diagnostics!

Is this port also used for tuning the bike and uploading tunes to the ecu?

Mine don't flicker. They've just gone out completely

Thank you for comparing the two and showing the pins. I just bought the one with thicker pins from a shop which claimed that the cable was compatible with Fiat car, but the pins were way thicker for Fiat Brava 2000.

Hi there, please tell me, I was in a conversation with a friend, we both have Aprilias. And from time to time as we are in a country without Aprilia's representative, we find out things for our bike via Internet mostly. On last conversation he mentioned something like, it re-sets something on the bike, if we disconnect the battery and bond the two connectors together. It was more people around and conversation desviates. But the questions remains in my head. If in fact does anything, what is it? Joao Paulo Luanda, Angola

*** UPDATE *** Thanks to MateFishing Team below I have been made aware that the link for the adapter I purchased from Amazon is no longer working. It looks like that part is no longer being sold. I apologize for any inconvenience. If any of you have success with another adapter, please leave a link in the comments so others can use it.

Hi can you send correct name of this cable? Link not working...

For other Aprilia Shiver 750 owners - the first link above takes you to a cable on Amazon. Don't know if that fits or not. Copy and paste the description "Goliton OBD OBD2 16 Pin Connector Diagnostic Adapter for FIAT 3 Pin" into Ebay and you will get the correct plug -www.ebay.com/itm/New-16Pin-OBD2-to-3Pin-OBD1-Diagnostic-Adaptor-Connector-Cable-For-Fiat-Alpha/401231360695?epid=510671180&hash=item5d6b40b2b7 The second link allegedly taking you to the correct plug, takes you to an extension lead only - which is not what you need..

2015 BMW I3 BEV .. I noticed flicker for the passenger side seat heater as well and no light when selecting 'M' (Manual) but not when selecting 'A' (auto) for fresh air or air recirculation. I just took it in today before reading seeing this post. Got a call from the dealer they are replacing the whole head unit under warranty.

Hi, can you download and upload engine map? I'd like upload 48 hp version. Thank you

Have this issue too on my 2014 i3 BEV. Will take to the dealer. Seems to happen in comfort mode as well for me.

Same for me too! In my case also the 3 LED's for the seat heater flickers. Anyone else got it fixed? Or maybe know what the problem is? It worries me if this is a precursor of a bigger problem.

Well, after a trip to the dealer and showing them this video they ended up replacing the entire center HVAC control module. They called me prior to seeing the video to say they couldn't replicate the problem, but after seeing it they swapped the whole thing out. I wonder if the diagnosis would have been different if I was out of warranty. The issue has not come back, but my infotainment system just completely reset and I lost realtime traffic information. Off to the dealer again on Monday...

same here, fixed it yet?

This happen to my i3 as well...but it stops flicker after a few minutes... I wonder if that have to do with the 12v battery or the AC fluid

Do you know what the wiring order for the motor to the ESC is? I am unsure which one is ground vs signal vs power

flip the carriage

I am about to upgrade my PB LC+ (classic from the original Kickstarter) to a ubis 1.75 hot end (which i have purchased) and was research how to do it. Do you have the plans/etc for the plate you made and is is shared any where?

Thanks for this.. almost 1 year ago to the day. I was one of the original kickstarter PB+ LC's and am now looking to be able to switch between 3 and 1.75; thanks for the heads-up. I'll check out your other video for the resolution.

Simon, what settings do you have in the KK2? thanks

how did you sort this problem out?

Hi, struggling to finish off my quad, are you able to show photos of where the battery and receiver plugs go to? First time building a quad, and is quite hard with no instructions. Cheers

Unfortantly it is the carrier for the hot end that is hitting the bed so making it higher will not help

Have you tried making your bed higher? Try adding a borosilicate glass, for example.