Video

I've had these for 20 years + and they still work for my needs

Hope y'all have a great time

You are technically correct, but when I say multi frequency I mean it is operational with multiple frequencies not operating at a single frequency. ORX is a great machine.

@@ProspectorsCache Yes. Also technically, most Simulataneius Multi-Frequency detectors end up blending frequencies which that blending signal is less accurate than s ingle freqeuncy result. Like many others have already proven in years past, I have also taken my oscilloscope to measure simultaneous multi-frequency detetors and found that they mostly average down to two frequencies (refereed to as blending). This is why I like to identify a target area first in line with the soil conditions & the type of target and then choose my frequency. I find running the single frequency then performs better than blend of multiple frequencies being averaged out. The simulaneous is, of course, better if you're just looking for a wider range of targets to hit a just dig which of course is a great way to learn tones and associate them to items. Then a good simulataneous machine can be switched down to a single frequency for more accurate ID tones. But for most who just want to run a detector with decent amount of target hits with capabilitie to adjust Iron tones and such,, there is little need to spend more than among the new offerings like the Nokta Triple Score and Minelab Xterra Elite as they are fabuous detectors to run and a great value:performance ratio offering.

The main point of simultaneous multi frequency is to reduce target masking due to other metals being close by. I have tested single frequency detectors and they can't unmask targets as well as a multi frequency detectors. That is a fact that is shown by many CZcams videos. Iffy signals has great research on the unmasking of targets

@@ProspectorsCache Yes, I did not argue that point, actually I sort of supported it. I was just speaking to the known fact that Simulatanous Multiple frequences blend and when you are able to idenfiy conditions, and ajust to the proper frequency for the sought after ttarget desired, accuracy increases. My conludeing point was also that for Most desctorists out there, Simulataneous Multi detectors are the sure way to go, Especially now with all the great values to be had in the newest of offerings…. When I built Ham Radios in the 1970’s and 80’s from companies like Heathkit, they later added a lne of metal detector kits. I built about a dozen of them for friends back then, and for that time they were decent machines, but not alot of dicrimiation and depth. What we have today coud only be imagined back then and for how relatively inexpense this better technolgy has evolved is really mnd blowing.

You can email me at tom@tomashworth.com

The slab in Kingsland

Come to metal directing club meeting. highlandlakesmetaldetecting.com

I find it is stronger that way.

@@ProspectorsCache it can't be you're just changing the layer height to get to the same size, you're just making the bottom layer look worse while having thicker layers than the rest of the model when the bottom layer usually looks the best, well it's supposed to, the only way it would be stronger is if you're getting layer adhesion problems at lower layer heights........

I have found all my printers are different. This is for the Elegoo Max with . 6 nozzle. My Creality v4 is set the way you suggest.

I will try that.

You are correct, I misspoke.

Round Rock GPAA and @highlandlakesmetaldetecting.com

I live in Burnet...

Thanks Bill.

Bill it turned into a huge problem. The electronics work great. The mounting box looks great. They leak and we are still working on that part. Bone Conductor Headphones for a Nokta Legend is a great idea, but it turned into a big project.

I am coming out with gold refining video soon!

Drawing has been completed.

I've been very busy and hope to get back soon. Lots of traveling.

I was using as strainer. No need for vaccum

All you need is a pan and go to the slab in kingsland.

Thanks Bill

Congrats Bill... I am sure you will raise a fine young man.

@@ProspectorsCache My daughter passed away 6 years ago and left us with a little man to raise and that is what we are going to do 🙂

Thanks Bill.

Thank you! Cheers!

That's Bill!

More coming soon!

Bill life has been hectic last two months. I have a lot of footage to release soon. Thanks for your support.

Robbie, we didn't weigh it, buti would estimate it was a half a gram.

The slab in Kingsland.

Glad you enjoyed it

Thanks!

Matt, I bought a kit off Amazon and it was less than $100. Other items at garage sales. Overall it cost me less than $20 to make a liter of Nitric. Way cheaper than the $100 they ask online for it plus $50 hazmat shipping. Also nitric you buy is 68%, the one I make is red fuming nitric over 90%. So I have to use less. Believe me it is way cheaper.

Thanks for the input.

No shipping would kill me. And probably some regulations , since it can be used to make bad things.

Thank you for watching 👀

Thank you si much 😘

Haha you know how to use it...

Welcome

Me to

Ha ha

Ha ha

Thanks for watching

Stump remover is sodium metabisulphide which is used for dropping gold from aqua regia

@@ProspectorsCache My bad, I just started learning this kind of stuff so I got things mixed up. lol. Thank you! ☺️

@@ProspectorsCache Now that I’ve figured that part out, have you any opinions on using vitamin C to drop the gold? (Just curious) Im also aware of aluminum, zinc, as options, as well…any favorites in your opinion? I really appreciate your time. Thanks again.

I use stunp remover

Couldn't agree more!

Thank you 😊

Thanks

This drawing is past, new one in the future.

You are welcome! Stay tuned

My opinion is that depth is no longer an issue. Target separation in trash is what makes the legend so good.

Thank you