Video

Thanks appreciate it. I would say it’s a great mower for commercial applications, embankments and rough mowing. It will give a good finish on a domestic lawn if your blades stay sharp. I find it’s too slow for covering regular short lawns etc to make it a viable daily driver. I covered 23500 steps mowing on Thursday with the HondaHRX, speed is paramount for good turnover. The Grin is slow and awkward for standard lawns. It’s great for rough stuff and challenging terrain. Needs a clutch and a stronger height adjuster bar. Stays remarkably clean underneath. Wet grass will stick however very easy to clean. Wheels are decent for grip and very good down steps as the rears are pretty big. Overall a good offering if you use it for its strengths, I wouldn’t want to use it long term on regular lawns. Hope this helps, thanks for the support 👍

@@bluesix2843 thanks for the details 👍 something about it doesn't grab me, handles and speed I think. I wouldn't cope with it going slow on a load of cuts through the day. Cheers 👍 hope it does well for you...I may demo one if I can

@@LewisgardenservicesLtd Everyday lawns- Honda HRX 537. Best mower by far. Swear by them. Fast, efficient and last for years. Superb mower. Worth every penny 👍

Ha, those two implements are very heavy for sure 😉

They’re remarkably strong without any reinforcement. As soon as the main barrow dies I keep the frame. I leave the buckets on the frames to move all my buckets about while in storage. They handle it no trouble and those two attachments are bloody heavy 👍

Indeed they are👍 best file for a saw I’ve used. Clearly just a demo of the vice set up (over best file usage) which is a huge time saver. Drives me insane swapping saws around to access both sides.

If you’re anything like me I have loads of old frames on the scrap pile, I find it a really useful recycle as barrows generally maintain a sturdy frame once dead 👍. I also leave the buckets on the frames while stored for easy movements 😉

Ha you know it! I have 7 saws too…that’s a lot of teeth! Thanks for the comment 👌

It might look like it however I assure you it’s the right way around 😉👍. Thanks for watching 🤓

Those Sthil sharpeners are very good….just needs a good operator stood behind it 😉

Yes it’s a good machine on sensible length grass. The extreme experiment at the end was just for “science” 😉you’d normally use a strimmer for that length grass 👍 thanks for watching 👌

The mulching on sensible length grass was genuinely excellent. It was very good as shown in part 1. There’s one shot in part 2 that I accidentally forgot to raise the height on some very long grass. I was asked to mow it off unexpectedly whereas it’s normally left long around a long row of vehicles just in case of damage. If I had raised it up and slowed it down it would have likely done very well. This was user error. The machine by design stays very clean as you might imagine in the dry. A wet mucky day may bring different results. Time will tell! I’m very happy with the performance so far. 👍

Part 3 has just dropped, I filmed it today off the back of your comment. You get a mentioned 👍 thanks for supporting the channel.

…..its like ….well it could have been worse then finding out she can cook and looks hot in a bin bag 😉. Hidden talents.. you never really know what you’ve got until you take it for a test drive 😉 She’s growing on me for sure 👍

Appreciated👍. If it helps anyone make an informed decision then my work is done 🙏

I'm a smoker for example, and when I'm not working, I like to sit outside playing music and smoking my pipe. That ain't useful I reckon. Am I to blame.

Do what makes you happy 👍 Mind you the old pipe smoking won’t do you much good 😉

Tip of the wood-berg so to speak 😉

Indeed, thanks for watching and the comment. You can see the whole evolution in parts 1-4. The Trolls kept it alive and drove me forward with it as you may have seen 😉

Magic 😉👍

The assembly instructions were terrible 😉

😉👍. It had crossed my mind as it happens. It was a lot of work to shift it all !

👍

😏 😉🤣

😉👍

It really is a great piece of kit. Money well spent if you have the need for one. When I consider the wasted time, work and effort using a regular bucket 😩🤦‍♂️

Indeed! You definitely won’t regret it 👍.

🤣 Funny 👍

Red telephone Kiosks are British not just English.

@@bluesix2843 never seen them north of the border

@@john.powell645 Google it 👍. Definitely British.If you think about it, it wasn’t called English Telecom…British Telecom. 😉

Guess so!, never played it. That’s actually a 30 year old length of picket fence!

I found Jimmy Hoffa and Lord Lucan in there 🤫

You’re welcome, credit where credit is due. It’s a great product and I’m sure It’ll give me many years of service. Thanks for getting them out to me so quickly 👌

@@bluesix2843 We appreciate the feedback! Not a problem, thanks again for the order!👍

Indeed, a nice little surprise although I’m all sugared out now after all those Haribo! 😉. The Rake Riddle really is a nice bit of kit. It’s perfect for so many landscaping needs 👌

I ordered a Rhinox rake yesterday for my JCB mini and just had it delivered (blimin’ fast delivery) and I didn’t get a lovely care package or discount. Favouritsim. (Also known as jealousy). :)

@@deetee6621 I’m really pleased with mine I’m sure you will be too. They’re really good at getting the kit out to you quickly if it’s in stock and doesn’t have to be made especially. Sorry you missed out on the Haribo 😉

@@bluesix2843 I have Haribo. 👍 I’ve just been unpacking it and it’s not too heavy at all, which surprised me. Sunday, I’ll take it into my woods and start on the job in hand. I have a 30m x 3m x 10m pile of slate and soil to separate, but I think I’ll start on some easier stuff first to see how it performs. Let’s just hope the weather stops being a …….

@@deetee6621 Good luck with the weather! The bucket is great for finer finishes and yes not too heavy at all. 56.73kg I think it was. If you’ve got more heavy rough stuff run a land rake through it first 👍. (🥚 🥚 sucking eggs with that suggestion I’m sure 😉) happy sifting!

Yes it’s the perfect tool for lawn prep 👍

@@bluesix2843 we lifted a brick pave drive this morning. Brick are to be reused. Used the riddle bucket A few shakes and they were clean ready to go

@@user-jt5vz3ct6c Sweet! Sounds ideal for that. I get the feeling I’ll be finding lots of new uses for mine too!

Welcome back! 👍

Thanks for positive comment. It’s been working really well especially now with a little experience using it 👍

Ha only a few hundred! I’ll put a stamp on it although it might not fit in the postbox 😉. I’ve processed my heaps nicely based on little and often. As Chief Brodey famously said…..you’re gonna need a bigger boat. My little machine is definitely better than a sledgehammer for sure. 👍

Yes I’ve rapidly become quite proficient at it all 😉. Check out parts 2,3&4 👍

GPM-Grinds per minute? approximately 16/17 full motions backwards and forwards per minute on this set up and size machine. If the product that is being crushed is particularly hard the pressure will automatically shorten the stroke for a repeat crush until it has cleared the bucket. I find keeping your stone clean a real benefit as soil and muck can clog up the exit points and embed your grinding teeth with a cushioning layer of mucky paste.

Works for me. Once you’re going it does the job well enough.

My Bio mass log gasification boiler takes 50cm logs which is the size I built the saw horse for. These were dinky little logs for my friends toy wood stove. Still kicks out the heat and packs a punch though! Yes a big bit on the top is very handy to stop the spinners etc 👍. I’ll take a look. You can see the full video on the channel.

It actually works great!. Cuts so many logs super quickly. It’s designed and spaced for 50cm logs not the tiny stuff I was cutting in this video. Check out the main channel version 👍.

It actually works great!. Cuts so many logs super quickly. It’s designed and spaced for 50cm logs not the tiny stuff I was cutting in this video. Check out the main channel version 👍.

Thanks appreciate it. You can catch the full build on the channel. The link is in the description👌

👌Dzieki, I think it’s pretty decent 👍 check out the follow up videos!

Boom boom 🤣

Talent ran out on one run in the wet on oil heading into the first bend at over 100 mph. Made a 180 video on my way around 😉🤣. It’s featured on the original uncut video on the channel 👍a real sphincter twitching moment 🤣

Tak 👍

Should work on anything like that. It’s munches through all sorts of concrete, aggregates and stone. 👍

The machine is set at full rate, once you get it filled and shuffled down it munches along quite nicely. Lots of chat in the comments over the 4 videos about the speed vs power 👍

Good to have you along for the ride 👌 your support is appreciated 😉