You can gravity bleed to the bleeder ports. Then crack the fitting at the nearest injector and run it on 3 cylinders for a bit. Use bit of ether to get it going if need be, it will push the air out quick, tighten the injector fitting and enjoy
I'm dealing with bad misfiring in my 850.. and after inspecting the inside of the cap I could see the rotor was actually scraping around the cap. Think my bushings are toast too
Yo tengo un john deere mod. AR de 1933 y necesito conseguir algunos repuestos si alguien me puede ayudar le envío mi correo electrónico:. emett8@ gmail.com. gracias.
That one looks rare! It has both brake pedals & drums for assisted turning. My '37 (and any other I have seen in Canada) just has the brake on the LH side. The RH brake was an option back in the day. Sweet ride!
Hate to be the bearer of bad news, but that is normal for bias ply tractor tires. How much pressure are you running in these? Should be 18PSI maximum. The flex in the tire should compensate for the out of round, and it should get better as the tire warms up from driving it.
Nice tractor.
Thats COOL!!
It is good for the mosquitos
nice project
nice project
Very interesting and clever. Keeps the mosquitoes away too.
😂
okay bud we get it ur balls are the biggest because no way in hell am i doing that
Is that a IH T6?
I'm curious, how you bled the injector pump? Without lift pump
You can gravity bleed to the bleeder ports. Then crack the fitting at the nearest injector and run it on 3 cylinders for a bit. Use bit of ether to get it going if need be, it will push the air out quick, tighten the injector fitting and enjoy
So no lift pump required
Some motors does not have any lift pump. It works if the tank is higher than the pump.
Hello , can you tell us the direction of rotation - I mean clockwise or anti clockwise
Each pump has its rotation direction on its model plate.
Teşekkürler
Cool,
My gosh that's a nice one.
Perkins
Befok
Very good pozz from Serbia
Are you running actual diesel in there spraying it all over the place?
Thats loud and clear!
Nice!
ahahah nice
That's Amazing
niiice
Are these injectors atomising properly?
Please, what is the cause of this problem, please help
344U موجود عندك و اشلون التوصيل
GD18
Do that outside!
Nice job bro
Good job friend 👍
Nice
Nice
reparetonmoteur.com/collections/frontpage/products/kit-reparation-joints-pompe-injection-rotodiesel-cav-lucas-type-dpa-delphi
Sounds great.
I'm dealing with bad misfiring in my 850.. and after inspecting the inside of the cap I could see the rotor was actually scraping around the cap. Think my bushings are toast too
Good work bro
Yo tengo un john deere mod. AR de 1933 y necesito conseguir algunos repuestos si alguien me puede ayudar le envío mi correo electrónico:. emett8@ gmail.com. gracias.
Nice paint on that A
Looks like you guys were having fun!
That one looks rare! It has both brake pedals & drums for assisted turning. My '37 (and any other I have seen in Canada) just has the brake on the LH side. The RH brake was an option back in the day. Sweet ride!
What's the story behind this?
Hate to be the bearer of bad news, but that is normal for bias ply tractor tires. How much pressure are you running in these? Should be 18PSI maximum. The flex in the tire should compensate for the out of round, and it should get better as the tire warms up from driving it.
why that background music?
AWESOME IT'S COME A LONG WAY