![alaskanlimoguy](/img/default-banner.jpg)
- 76
- 997 995
alaskanlimoguy
Registrace 16. 02. 2008
Owner Desmon Butts and Texas Autogyro
www.usautogyro.com
www.usautogyro.com
Video
Perfect Gyroplane Takeoffs!!
zhlédnutí 11KPřed 4 lety
This video discusses good takeoff habits. It shows why and how to do a standard gyroplane take off in modern 2 seat gyroplanes using the POH as a guide. It also show errors and why you should fly a clean profile.
Creality Ender3 extruder Nozzles and Bed level Springs
zhlédnutí 156Před 5 lety
Discussion on Extruder Nozzle Basics and bed level springs upgrade.
3D printed Watch Escapement working project!! Creality Ender 3
zhlédnutí 2,2KPřed 5 lety
This Is a fun project on Thingiverse! "Watch Escapement" I printed it over several days on an Ender 3 pro with a Duet Maestro upgrade!
Creality Ender3 Pro/Duet 2 Maestro build plate orientation for better prints!
zhlédnutí 285Před 5 lety
This video shows how changing the orientation in the slicer can be the difference between a good or bad print. Getting a good print is not just about slicer settings. Please like and share!!
Creality Ender3 Pro / Duet 2 maestro -Cura slicer settings! Benchy test
zhlédnutí 2,2KPřed 5 lety
Creality Ender 3 Pro Cura slicer settings! This video show some more upgrades and Cura slicer settings! The printer is using the Duet 2 Maestro main board. I had several issues that many people have new to 3D printing. One included rubbing from a extruder mod that I had to file down to give better clearance. Please like and share!
Duet 2 Maestro - Creality Ender3 Pro Ugrade
zhlédnutí 8KPřed 5 lety
Creality Ender 3 Pro Duet 2 Maestro Upgrade! This was done on a bare bone Stock Ender 3 Pro that had the board fail in less then 2 weeks. Special thanks to youtube: Design Prototype Test & Chris Riley They have great videos on REPRAP systems and how to do it. The only mod I have are TL Smoothers see "CHEP" and his video all other information can be found by google Duet Maestro , Yat and reprap ...
eBay Solar power backup working! Power out for over 5 1/2 hours.
zhlédnutí 107Před 5 lety
Solar backup system working while power is out over 5 hours. This system design can be seen in the link at the end. It powers the fridge and uses a computer UPS with large battery’s.
Sawblade jig indexing tool for mini lathe? Take a look!
zhlédnutí 10KPřed 5 lety
I used a Saw blade as my jig to design and build a indexing wheel for a Microlux mini lathe. Full description and steps.
Tool Post Drill made With stuff you already have!
zhlédnutí 2,3KPřed 6 lety
This Easy to make tool post drill was made with things I already had. I only bought the chuck from E-bay. I used the quick change boring tool holder as the guide for the drill tool shaft. Its the 250 series quick change model. Includes how to square your lathe.
Mini Lathe Machined Rope Makers Marlin Spike! Very unique design!!
zhlédnutí 1,3KPřed 6 lety
This is a very special tutorial on how to make a Rope Makers Marlin Spike. It gives the owner extra uses and can aid in rope making! Some people also use it in self defense!! complete plans provided!
Making a Machinist Hammer full build with directions on Mini Lathe
zhlédnutí 1,7KPřed 6 lety
I Designed and built a nice machinist hammer using a Microlux mini lathe. I had a fail partially in the handle but managed to salvage it! The video is long but well worth it and includes parts list and dimensions.
Very Best, Tailstock Spring Loaded Die Holder design! Worth Seeing!!
zhlédnutí 882Před 6 lety
Custom spring loaded tailstock die holder for lathe threading. Holds constant pressure and alignment!! Little long but worth viewing it! Includes all dimensions!
Grinding a knife on the mini lathe
zhlédnutí 881Před 6 lety
Mini Lathe Knife grinding. I found a simple way to get the start of a consistent grind on a knife made from round drill rod on my mini lathe!! Includes Thunder and lightning!
Mini Lathe Pen Project MicroLux 7 x 16
zhlédnutí 1,7KPřed 6 lety
This is a Pen I machined out on the MicroLux 7 x 16 mini lathe.
Mini Lathe Milling Attachment to cut 45 degree grove in vice block!
zhlédnutí 1,1KPřed 6 lety
Mini Lathe Milling Attachment to cut 45 degree grove in vice block!
Ebay solar battery backup system with 1000 Watt UPS under 1000.00
zhlédnutí 2,5KPřed 6 lety
Ebay solar battery backup system with 1000 Watt UPS under 1000.00
Ebay grid-tie Solar system setup step by step
zhlédnutí 9KPřed 6 lety
Ebay grid-tie Solar system setup step by step
Mountain Flying training for Fixed Wing and Gyroplane
zhlédnutí 3,6KPřed 6 lety
Mountain Flying training for Fixed Wing and Gyroplane
BlueDriver Auto scanner Review In English and Spanish by PowerDriven
zhlédnutí 3,9KPřed 7 lety
BlueDriver Auto scanner Review In English and Spanish by PowerDriven
Titanium Autogyro Filmed with SOLOSHOT 2 Brigham City Utah
zhlédnutí 4,3KPřed 9 lety
Titanium Autogyro Filmed with SOLOSHOT 2 Brigham City Utah
Titanium Autogyro Testing. First flight in the USA
zhlédnutí 10KPřed 9 lety
Titanium Autogyro Testing. First flight in the USA
perfect and simple explanation! thanks
President Kimball gave this outstanding talk. I love it
Straight up hate speech. Hatred towards women and the general membership of the church. Confesses a deep anger towards the abolition of polygamy.
No guys you have deal with the balance and or out of pattern. It's not hard to do learn to do it or other parts of your gyro will crack. If your blades have started to shake more then it is likely an out of pattern issue. This is an attempt to cover up what is falsely called 2 per rev.
Great idea buddy 😁👍 can i ask why you did not fit one on the other side as well ? Would it be to much damping ? Or does it just not need it ? Cheers in advance 😁😁👍👍
Got my training and rating in the MTO sport from Steve Rastanis (may he rest in peace). Great flying aircraft.
Very nice
Regretfully some use flap and teetering interchangeably. Teetering in the semi- ridged rotor to equalize lift in the rotor system but so many use the term flapping for this and it causes great confusion.
Looks a lot like a motorcycle steering damper.
Sorry Hoss, couldn't hear what you said due to the obnoxious music.
Darn good way to invite metal fatigue.
Airworthiness Certificate must have the Limitations attached
Самый красивый автожиры !( ЕЛА 10, АС20)
Great video really just explained life to me thank you sir
What happened to the Arrowcopter brand?
Lust is an unnaturally intense desire in work or sex.
So being physically and sexually attracted to your spouse is a sin? Okay 👍. I pity your partner
Passion is a beautiful thing. Spencer Kimball had a unique hatred towards love.
Well thought out. I might have used a length of threaded rod between the sawblade and piece to be drilled instead of the taper and slits. It would turn as one unit, both sides; providing that threaded rod was tightened with a nut on the outside of each circular piece.
Nice work dude! I also am printing this project and it's taking a couple of days on my old Anet A8, but I'm getting there. This thing is bloody awesome!
He shouldnt have scared he so early. Let her try to reach something first then scare her.
good video w/o the fucking Music !
This was extremely helpful thank you so much
hey your welcome!!!
you are very welcome
What is the life expectancy of a gyro pilot now ? It used to be 750 hrs !
Have you priced a new one? My lord!
This shows a standard modern gyroplane POH style takeoff. This is not saying other procedures are not good. For example soft field is used for special reasons. I also teach rotor handling to line up and take off. This is basically a short field style take off that explains what can happen if you get below the powercurve. It also explains correct speeds and how things effect them.
"Masturbation leads to homosexuality, which leads to beastality"- President Kimball, " The Miracle of Forgiveness"
:)
The helicopter folks submit that the action of the blade raising with function of the teeter brings the CG of the blade closer to the mast. Is this also a source of stick shake?
I would say you need to give a try on Cura 4.2. There you can set your custom profiles for different filaments, custom profiles for each item you print, custom quality profiles.
If I could I would the new versions of Cura will not run on my computer unfortunately
I changed out the nozzle and had to increase the temp to over 210 with the new one.
Great video. I didn't realize it was so easy!!! I seriously thought I had to hook it up to the fuse box, and everything.
He never said how much to torque down the head
its not actually a torque. I do not remember the amount. Its something like 3/4 turn past a number.
Very Nice And Fascinating Des.
So is there a way to use the the grid tie inverter and backup battery in one system?
In my home they are actually separate systems. one I use to backup the fridge and the bigger one supliments the grid see the link: czcams.com/video/o79dCUkfh1g/video.html
I made a comment that runway 17L meant left traffic and 35R meant right traffic and that is not actually always the case usually the L or R is used when the airport has several parallel runways to depict the left or right runway in the set. In these cases they might even have a C for a center runway like Dallas Fortworth does.
Do you make these for people to purchase?
This One I gave to my grandson. I would not even know where to start to charge for it. It was quite the little project.
But how long will the grid tie inverter last, 3 months, 6, a year before you will have to replace it or buy another one.
its been working great for over 1 year now
Everything works...i did this to my Ender 3. Very happy with it. Thank you.
glad you had success!!!
This is still basically a stock Ender 3 pro unit. I did add some basic fixes, These setting seem to work as a great starting point. Each item i have printed required minor changes. I also made some changes to the printing profile for example rotating the object on the build plate can make a big difference.
After doing more small tweaking I tried some ABS this was very different from the PLA I was using. The temp I used was 230 and 100 for the bed. This was a good start but still needs more tweaking I also did layer at 1.5 this helped fix several issues in the ABS. I am still working on more issues. I also moved the heat sink fan to full on at 45C and the filament cooling fan to about 1/2 speed. I cannot seem to figure out how to turn it on and off with any setting its on fan 1 position but every code i try seems to not work.
I don't own an Autogyro, hopefully someday I will. I noticed in many videos the stick shake. I was wondering why this occurs, even though the rotors are balanced. Furthermore, the stick shake would be very tiresome for long trips, and would cause metal fatigue as well. Has anybody else found a solution to this issue without adding more weight to the craft? I understand that every pound of added weight reduces overall lift capacity.
The shake is not as bothersome as you might think! I have flow for over 9 hours in one day. Usually shake comes from several issues. Out of balance rotors being the first
I also can walk with stones inside my shoe, they are not too bothersome, but why have them there? Just because they are only bothersome, I am not going to put up with them.
@@ew4096 Its the nature of how the Gyro flies that you cant get rid of all the stick shake. If you cant tolerate it then you will need an airplane
The screen just works if you wire it up the way you did? Or did you have to do some other hack?
yes it finally just worked after i tried the single cable version
Too funny! My sides literally splut 🤣 The music was the icing on the cake.
I changed one of the setting and seemed to get better results on the "set steps per mm" E was changed from 95 to 100 and this seems to have helped with under extrusion. I found that this build is only the beginning. There are two basic ways to start a good print. One is how well do you understand your firmware settings. Next is how the g code is setup with the slicer. If you have great gcode it can overcome a limited firmware setup and vice versa. I did not get into how to setup the small video display menu. I just happened to find code online and used it but its not perfect and i really need to revise mine to get what i really want. I am using a stock machine with a few printed mods. Many other tutorials show builds using other things like a BL touch. This is great however the codes and settings that they use do not directly transfer over to what I did. Also I connected both my coooling fans to my extruded together and full hi on heatup of the extruder. This is probably not the best idea and I will probably correct this so that I can control the lower filament fan for first layed adhesion to the build surface. This might help prevent warp prints that i have been having.
Do you have a parts list that you changed?
Its been so long now that I do not remember everything. I did have several valves replaced and all the injectors redone. the exhaust and seals.
Nice Gyro, but I don't trust anyone sitting behind me. it is a matter of trust.
I wish I could understand the audio.
👍👍👍👍👍👍
👍👍👍👍👍👍👍
Just the info I've been looking for, Thanks ! I want to do this.
Where to get the tuner
mine is actually for sale its a mega squirt plug and play for the MR2 you can send me an e-mail if your interested. usautogyro@yahoo.com