Video

The old coolant was a dexcool clone. Gunked up easy

Glad to see GSF content in 2024 please keep them coming!!!

The only thing i will say is the valley pan leak is probably coming. I have an 16 gsf and mine hit around 72k miles. Change the coolant frequently maybe.

So the prop just slides off the driveshaft and is not held on with a c clip or anything else?

Zoom out that camera a bit, Dude. Not so much in your face.

Have you considered adding a APEXi Throttle Controller? I’ve heard that it helps with the lag that’s suffered in these cars.

Nice car & I have a '23 IS500 that has the same V8. I have always wanted a GSF. My car is stock other than Borla Axleback, Michelin Pilot Sport 4s (Summer-Tires) & aFe dry flow air filter. I clocked 0-60 last night 4.5 seconds with Traction Control off.

How much should a job like this cost ?

What should be the coolant level in the overflow bottle when engine is cold?

This does sound good. But… I wish they’d come out with something more exciting for the Lexus brand. 3.5L V6 in the IS just feels so underwhelming for a premium car. It’s basically had the same engine and power output for 20 years. They need something other than the 3.5L N/A V6 or the 3.4TT V6. An all new inline-6 for their trucks and RWD-based luxury cars would be ideal. Think of a modern day 2JZ, or Japanese version of BMW’s excellent B58.

Thank you! This gives me confidence to help a guy from Church do his 2016 CRV. Money is tight for them and it is something I can help with as I did my own until 20 years ago when I became disabled! Between you and me I can help teach him and save him $500!!!

Love your videos learn so much can you please do a video on the fuel pump how to check it and replace it

Did you have to get it tuned and did it change the mileage....or did check engine light come on?

no anti seize on the hub part which touches the new rotor?

I got a 08 STX15F that's hydro locking. Just replaced all the valves in it. The cam chain tensioner broke. So took it out to test drive and UT hydrolocked on me. Now turns out I had the wrong jetpump housing on it. I had a 2012 on it. Could that cause anythinh?

Great info! Thank you!

Ok, so what's the trick in UNPLUGGING that dang connector? thx

Great video! I know you've moved past the TRD Camry, but curious if you recall there being a "Power Window Up With Transmitter" option?

Can anyone please tell me which of the 4 sensors are heated? 07 JKUR. Please. 🙏

I don’t believe you ever lose money on flat rate. You lose on Flat rate until you learn and gain experience. It’s called the “School of hard knocks!” You should build a case with the manufacturers and tell them you won’t fix their garbage, and then have them explain to the customers why it won’t get fixed.

I have 405,580 miles currently on mine. I guess it is a bad engine lol

Thanks

I wouldn’t worry about “upgrading” the pulley’s to these lightweight versions. Most aren’t balanced and you really don’t gain that much.

Jus take the starter out and the bottom bracket from the bottom u can see the sensor from there easy peezy 🧰🛠️💪🏿

This is the exact same set up that im going for on my 2020 Prius! Glad I came across this video! Thanks 🤩

what if I need to keep the car running, because of my dogs, what do I do then? car can't be locked, manually or by remote, 2008 Highlander Limited, no worries about the SUV, but my dog Snoopy

Got to get them started young !!!😂😂😂

I have the hybrid would one out of a regular Camry work The part number is the same

Freeze the wear ring and bearings and get the whole housing up to about 200f. You'll gain a couple thou to help prevent damage. Especially to the bearings

I once crossed my battery cables and burned out 100 amp fuse, something like that anyway, it was a big one. So I could not charge the battery with boat motor alternator. The mercury dealer charge me $70 for that cable with the fuse in it. I want to auto parts store for something later and ran across the exact same thing at an auto parts got $10

instruction says "​make sure that the brake pedal is not depressed when performing this procedure" but you pressed and successed!

I installed these same coils on my is350 …the advice on unloading the suspension is greatly taken …that’s the part I’m at in my build process rite now is just dialing them in exactly how I want them to sit …great set of coilovers though 10/10 …you made a great vid btw …only I found that actually had these coils and set them correctly

Cant see your work. Its above your video point

Are you saying for the second treatment, turn on the fan full blown without the AC on ?

Its the torque that really gets our 2GR's moving!! I have embarrassed so many tuner Civics and Integra's its not funny. Mainly merging onto the freeway and taking off on them and listen to them trying to catch up 😆

I don't Trust you your master cylinder cap shows signs of brake fluid contamination!

USE ONLY THE BRAKE FLUID MARKED ON THE MASTER CYLINDER CAP!!! WHICH SHOULD BE DOT 3 NOT DOT 4. DOT 4 WILL FUCK UP MOST JEEP BRAKE SYSTEMS!!!!!

Bleed through the bleeder screws only!!!

God that is not smart. NEVER RUN A MASTER CYLINDER DRY!!!If your going to flush the system don't do it if your only replacing a caliper.

Hi captain, Do you have a video of cleaning your VST? Or have instructions how to clean it? Thanks

Awesome job. Thank you. A note to others that may experience the same thing I did: the piston did retract as far I needed for the new brakes. GENTLY with a pry bar push the piston back in.

Is that special oil filter tool necessary to remove the cap? I guess I'll find out on my own shortly anyways Lol

I did it on a 2010 4cyclinder Hyundai Santa Fe. Same stuff EXCEPT the bottom bolt of the altunator comes out ok but the top bolt is blocked by the frame. You need to take the plastic undertray off. Then take a jack and place it under the AC mounting(NOT the oil pan). Slowly raise the engine and it will clear the frame. Then the alt slides off. Slide it off top first.

Do you know if these will fit the 2024???

Tried other videos and they didn't mention the release foot from brake pedal. Tried that most of the day until I found your video. Thanks

I find if you take thermostat off and then remove from hose, it’s much easier.

Probably not the greatest idea at 1:05 to leave a ten pound starter motor hanging by the wires, especially if they are corroded.

Really similar results. Cool results. The gsf is an ulev, so those cats are robbing it on the top end

Hi, this way you only replace 50% of the oil. the other 50% remains in the torque converter so this oil change is useless, it remains polluted.

Thank you so much to share your knowledge wih us & your valuble time . I was wonder if you can help me on 2006 scion Xa , the electeric diagram from AC compressor wire to outside fuse box & to inside fuse box toward off & on switch in the middle of the dash under the redio . There is no juice to the key . I do thank you for your response . Thank you .🌿🍀 🇺🇸 USA 🗽 🗽 🗽 My LORD be with ❤ you sir .