Video

Thanks for the info.

Have you ever worked on iPhone SE 3 ? I have one at home that has the following faults : -Bootloops when plugged in, doesn't charge but gets the initial input to boot the phone -No speaker -No microphone It does charge wirelessly These are all connected near the bottom of the motherboard I reckon, perhaps it's a common fault but I couldn't find any info on it also, iPhone SE 2 is no similar it could probably have the same faults and fixes Oh, and amazing video. I did like and subscribe

About the only thing I understood was, I wonder how these tweezers got dropped, but you're still fascinating to watch.

What killed this IPhone? Chick sitting on IPhone in back pocket (that's all of them).

Any idea why the flor does not load? It keeps trying dor minutes and the phone gets very hot. Thanks

would the ultrasonicator take the glue off the board?

man i hope the shop i brought my phone too doesnt do this.... theey tested my s22 ultra and said the board boots up so all it needs are the fpc connectors repalced but it needs both of them reeplaced and the small one fot the antenna... i hope they dont screw this up because he sounded scared about the sandwhiched board

hello sir ,please help me, where can I buy the small thing that you replaced, I want to buy more, especially for samsung, huawei, etc., where can I find something like this? i want especially for a huawei p30 motherboard to replace one thing like this i found almost burnt., thank u!

Just one question. Why have you got a pair of sunglasses sitting on the top of your head indoors? The clue is in the word "sun"

Hi Jason. What temperature do you solder at? Also, can you recommend where to get a good battery? You fixed my phone years ago, but unfortunately, it burned up in house fire. It did work great.

I love to learn…. Am from nigeria …

I love to learn…. Am from nigeria ….

Is there anyway i could send my s22 ultra to you to see if you can get it to turn on ? i threw the phone many time when i snapped, and it turned off.. i bought a new display and frame from samsung... and replaced it all myself which is easy to do.. but it still wont turn on... there are 2 fpc connectors and one for the antenna on the board and sub board that broke when the phone snapped in half on the frame "it snapped between the board and battery which ripped the cables off the FPC connectors", for the black ribbon cables, and the antenna cable.. and i have a local shop who will replace those fpc connectors on the board for $150 and hes confident itll get the phone to turn on But im not that dumb as ive built and worked on computers and dabled a little on circuit boards for 20 years.. just not phones.. and i still dont think an fpc connector is going to get it to boot, and i am not confident in this shop to diagnose the issue further than this... Sure with no FPC connection the screen wont come on.. the USB connection wont work.. but shouldnt the board itself still power on ? I dont think the FPC connectors have any affect on wether the main board turns on or not. the phone shut off the first time i tossed it... before i snapped it in half ... The first toss just shattered the back and front but it wasnt snapped.. and those connectors werent broken... Which leads me to think its another issue.. something from the impact of the phone being tossed shut it off. This is why im thinking im going to waste my money replacing the FPC connectors that WERENT broken when the phone shut off on the first toss. i asked if he could do something similar to what you did in this video.. and he said no which is weird considering he has the tools and stuff you do, He put my phone under the microscope and i saw the damaged FPC connections... if he can repair this kind of stuff like resoldering an FPC connector and stuff, shouldnt he be able to diagnose a no power issue by tracing the power issues like you did.. That seems simple to me, I would do it myself but i dont have the tools you do I mean the FPC connectors still have to be replaced, so i guess it isnt a "Waste" of money, but what i mean by waste is this is probably not going to get it to turn on as there is probably something else causing that issue If i didnt want my data so badly i would just get another phone, which im going to have to get here soon.. been 2 weeks without a phone and i NEED one bad... if i do the FPC connector replacement, between that and the new frame and screen i got i would have already put $300 into this phone, and what if the FPC connections still dont get it to boot then im out $300 ? Then i gatta pay another $150-300 to get that to work ? I dunno this sucks.. All because i refuse to use cloud storage... maybe i should use that on the next phont.. i shoulda had my pics backed up on my pc as well... sigh

I have heard before that this one doesn't shows true details, or valid verification, is that true?

thank you for your honest review.

Fascinating watching the thoroughness and sincere customer service value you show. If ever my iPhone needs repair, it's coming your way.

Always good to see a real technician an not a parts swapper !!! 😊 Thank you for sharing !

Where do you find the board views at? Is there a software you download that gives you a list of boards you can view? I’ve tried Google searching this stuff and it doesn’t give you a nice board view like you have where you can click on what you wanna see

Creativity 😊😊😊

Very strange I don't remember watching this, what's even more puzzling its in the top most three viewed videos on his channel. Because it's got the viewed red status bar. So I'm watching it to see if I can remember anything from it.

What cable is used to link two or more power stations together?

Impressive

Hi there a phone came to me which is vdd boost short to ground i removed the power ic shield and a capacitor was shorted to ground and i removed, after that phone came back to life But the problem is after i reballed the layer and switch on the nand line short to ground I removed the layer and the problem exist pleae help After injecting voltage cpu getting heat up

Jason , this isn’t a failure , it’s a learning experience !!!! And you’re really awesome dude , you really encourage me to do things and not give up , just learn and proceed !!!! Thanks for the great video!!!

huh huh ha ha he said ballls.

Why not place new solder mask over the 4 exposed debug pads? It's simple UV cured brush on stuff.

I like your work so much

Hi

thanks for the objective review , i currrently have a 4g lg g6 and have been happy with it but its getting old, android 7 outdated for many new thinga, best use it is linked to my lg tvs and steros i can pull up most you tube videos or music and with a click or two transfer to my remote lg entertainment to star or change channel

Hi, with a good job. You are real professional. How was sweating here myself for those tiny little parts? But you did it, you did a good job. How do you cost them up? Happy customer, you are very honest. It's nice to watch a video. Thanks again

🥰

How many frames per second does the thermal camera record? Thanks

Great work 👌👏

My samsung phone is died after playing game to long and get warning overheating after like 5 minutes it’s freezing and died.. it wont turn on can you fixed? Can i mail it to you

You do a really good job. So don't be nervous.

I do admire your way of technique as you are very talented. I’m 40 years electronic technician, but I loved your job…❤

Hi

Супер

Great video as always Jason, I've been a fan since your Missouri days. I have a few questions, I have the same mechanic board heater and my first iphone 12 separation didn't go well, the top board didn't work after separation. This heater has two temperatures, which temperature do you use, how long does it take to come up to temperature, what is the max time you would leave the board on the preheater for? Sorry if this is too much and thanks again for all of your videos.

Is there serial number somewhere inside the case?

Heya, I have bean thinking about baying a blackview it's like 50/50 for me now after watching your review. that the flir is that lagging is a no for me.

Wh maste

phone board the free version dont even have anything to bring up in all the iphone models, but wish i could find Samsung ones.

I definitely need to invest in solder tips that's made for small work.

What solution do you use to clean the motherboards in your ultra sonic cleaner?

No wonder Apple didn't repair it ..... that was good work..

Brilliant work 😊

just stumbled across this video, I don't even remember what I was looking for after watching the whole thing. very entertaining guy to watch work.

Good Info.

160x120 thermal resolution is trash.