Video

Nice - so you just eyeballed that the ramps were parallel?

gahh I love it.... and the ring as well

Hola amigo, y se mojo la prenda mientras la planchabas horizontal?

I'did use the product and I say do well non a great but for a waterless cleaner with a car with ceramic protection do right what explain the spray so if you non does a regular clean don be a great job.

Je l'ai acheté en pensant que c'était bien . franchement je regrette Après comme la vidéo l'eau ne fait que couler . Merci pour la vidéo

I got a 1000 grit sandpaper can it work?

maui charges $75 + shipping fees (was $90 + tax for me) which comes with 2 lens replacements, cleaning, adjustment. Think it would be worth paying the $60 more for authentic Maui Jim service compared to these?

Many like to criticize but this is a GREAT video for anyone who wants to do automotive painting for the first time without spending a bundle. I came across a ton of webpages saying, no, you need to remove the entire bumper, sand everything, paint everything, etc. I followed what this guy did and for $25 in primer, paint, and sandpaper have a job that looks really nice (instead of $1000 at a body shop). I just used newspaper around the next panel and taped up the lights. Just be really conservative with the spray and use multiple light coats to help avoid runs. I also used 400 grit sandpaper instead. Great video.

lol

What kind of pad did you use? I know foam but polishing, buffing, light sanding?

Good Job

No other ramp works for a mustang except this one😭

Just bought a silver surfer statue for pretty cheap just has a big crack this video is going to help a lot

I’m having a problem with my mercury

No good

Should remove that dent out first still good job n video tho 💪🏽💪🏽💪🏽💪🏽

Maybe on shirts on a hanger but those cargos were just too chewed up 🫤

this is hard to watch. they tell you how to use it and then you go and spray on twice as much as they say and then say oh it's streaking

Aje designed it so that it wouldnt have to be adjusted. There was a lot of thought behind this design from the install, to the modular setup whete you can just change the motor mounts for your setup. It really is a Lifetime K Member.

perfect ramps for those mustangs, challengers, chargers and camaro's. I need to get me a pair of these for the Camaro

*It's called indexing. I would imagine an assembly line wouldn't index all the springs perfectly to OEM spec.*

Hang up cloths then stream up. Steam will settle the creases but use gravity.

This was incredibly helpful fixing a favorite pumpkin that I thought was unfixable. With your video, I fixed it so beautifully, you can't even see where it was broken. Thank you!

Always check the fluid first. If it's low, or dark it needs changed. If it has 150000 or more it could be more serious and the Lucas won't help at all

I just watched this, video. Yea there is a spacer that comes with those A arms that you are supposed to use if you use the SN95 spindles. This isnt an AJE issue, this was a user install issue.

I just bought the same set like yours! Question do they get easily tarnish ? Do you ever shower with them? should i be worry if i wear them 24/7 ? Should i avoid wear em’ on the beach or pool ? How do you maintain them? Thanks

If you had taped off the lights and used some putty on the rough spots, you would have got as close to perfect a repair as possible with a spray can. You'd have got double points for removing those couple light fixtures instead of taping.

I have the Beat Flex and its just a bit different than these. Instead of this slip-in type of connection, they had a snap-on connector. However, it was still the exact same issue as this guy. When I pulled the wires away from the board, the connector became completely detached. So, I carefully reattached it by lining it up and pressing it onto the board. I could feel it snap into place. After that, I tried the headset again, and lo and behold, it worked!!

Anyone know the part number of the gt350 solenoids?

Love the peace and I am going to order it today ♥️

Where can I buy one of these?

Have you come across any multiple setting switches? Ie: have the actuator open halfway, then full? The factory roush f150 has a knob that allows this same actuator to be opened 25/50/full. Thanks

TITLE NEEDS TO BE CHANGED TO "HOW TO FAIL AT FIXING BUMPER".. OR "HOW NOT TO PAINT YOUR BUMPER" DEFINITELY A "DO NOT RECOMMEND CHANNEL" BUTTON PRESS FOR ME

Quick struts are very good struts to use and a next thing the new spring will ride a bit different for awhile cause it's new ,it has to get time to work in,can't compare the new with the original that come with the vehicle with the new that just replaced

1. Always tape off areas you don't want paint on. Don't care what the situation is. There is zero reason to be sloppy. 2. Sand the surface down. Depending in how deep the scratches are you may need Bondo. 3. Use alcohol to wipe down the surface and clean it. Then use a microfiber towel and get any remaining dust off. 4. TAPE OFF THE AREA YOU ARE WORKING IN TO AVOID OVERSPRAY. 5. Spray a decent amount of primer down. Let dry. 5. Wet sand with high grit sandpaper. 6. Dry off and clean surface again. 7. Spray base color and get a decent layer on one at a time. For the love of God don't do what this guy did. Everytime I see runs from a can on a car I cry. You should not be spraying that close with that can. 8. Once your entire base coat step is complete, Spray over with 2K gloss clear and hardener. It's in one can. Failure to do this will result in your paint peeling off and away and not being protected. Now you know.

For a work beater if it looks good from across the street it’s good enough.

What wattage is it 1/4 or 1/2

Why didn’t you just take the piece to Home Depot to get it color matched??

There 100% reps there goods ones and there's no shame in wearing reps but just not ever sells them as legit here's how I know Reps have a Chinese stamp on the label and yours has that(before you say that it could be any pair no there will never be a Chinese stamp on any authentic Jordan) the insole sticking seems a little off I recommend you use a black light or even sneaker authentication services I recommend legit check.

inside take isnt supposed to say MIAMI, its supposed to have a number. also the lace colour is wrong, box label is wrong, dior logo print colour needs to have a purple tint colour not a light blue colour. the toe box is too thic, dior chinese tag things doesnt exist. its a bad fake and you will get called out if you wear them outside. you know very well yourself they are fake but if u wanna believe they are real, you do you. you can buy same quaility reps on wedian for $80 so you basically got scammed but if you like them then yeah

there are literally china signs bro and you think it is legit

man these are reps 100%

you bought reps

Wait a minute ... What ? You didn't bother to take the ( 5 ) extra seconds to put ( 5 cents ) worth of masking tape over that light ? What an Idiot !

This helped a lot. Thanks Bro

Cheers dude…appreciate the knowledge💯

Does the Corbeau brackets and seat lower the sitting position compared to stock bucket seats? I have a "tall driver with a helmet" problem with the bucket seats.

Zero expectations, zero disappointments

I lost tht brush attachment. Do i get it anywhere? I wanna buy tht part?

Very informative video… love that you go into detail to explain everything