Video

Love Unicorn heads!

Details of that Milwaukee tool please!

Hello, I have a question, do you know if it is possible to simply change the glass? without disassembling the interior, because I have the same problem but my curtain mechanism works perfectly, only the glass is broken.

Thank you from Australia. This will save a bomb.

Thanks for showing the process!

This is such a bodge job, do it properly or not at all! Window out and refit professionally.

Thanks for the great video. What size trim-lock did you use to cover both inner and outer metal please?

I just finished this project on my 2008 s80! Question for you: I did this on the passenger side of the windscreen because that's where the leak was... I went pretty far past where the separation seemed to be, but should I do the entire upper edge of the windscreen? I'm curious if doing this would prevent future separation on the driver's side or if that wouldn't really stop the issue from occurring later on. Thanks!

Proper job mate

I’ve been trying to take mine off for weeks now! This video definitely helped! Highly recommend doing it this way! 💯

I need to do that 😊 do you have any contact please 😅

What the tool?

White spirits.....is that part of bomding system.. ie ...sika ..dow...!

Hahaha sound like a guy a Ken hahaha danny

8.6.24 Zajimavé téma, ale kameru si postavte na stativ, aby vás natáčela jak pracujete. Když si jí dáte jako čelovku, tak z toho divák moc nemá.

Good Job, got some great tips, I guess it would take me at least a day as a 1st timer, unless you want to do it ? ( I’ll drive to you)

Gives me hope this . I am not sure the angle knife will reach the urethane on my window . I am Cautious about using a thin braided wire . Ta for putting this up very helpful.

Tip for u. When u clean soak up the scuttle panel get it really wet then when u chuck the screen in when ur flicking the scuttle over the screen it comes over more easily

Same thing happened to my car, luckily had the windscreen resealed thankfully didn’t crack. Had a spare screen just in case Great video 🤙

Did the camera need to be recalibrated after the new windshield install?

Do you not seal the scuttle down with sealant? Doesnt it leak on to the engine?

Craft remains craftsmanship. Very fine work, congratulations

Nice work is that retroworks your at ?

Can you make a video how you attach those fein blades to that Milwaukee tool? I'm entertaining buying one for this specific purpose but don't see how those blades are compatible with that tool considering the Milwaukee tools bits look a bit different. Thanks

METH is not good for you

He has METH and glass confused

This is why you should NOT work why high on METH

Where do yo buy window

Good video 👍🏼 I take it the bond just squeezes around the drainage channels? Also I’m reading some of the trim only goes over the inner skin. What’s the thoughts on that?

How do you normally remove the glass on an ordinary car where the paintwork needs preserving?

What a lovely professional job, wish you where nearer to North Yorkshire.

I am pretty sure my rear window is leaking. The bottom right hand side of the tailgate cover gets saturated in the rain. I have checked all around the rear light, and it seems to be coming from the bottom of the rear window and running down over the fabric cover. Can you remove the window and just replace the seal?

How much do you charge to do this

Hi. Thanks for detailed proces video. I got jaguar F pace fixed pan roof how much would you charge to replace it . I ve bought complete roof cut woth pan roof from breaker . So in actual removing the good one from doner vehicle snd installing on my vehicle . Where sbout in country are you

I wouldnae describe this as ASMR pal. I learned an awful lot from this video. Thanks so much. Your speed, accuracy and skill are all high.

if anyone here owns a range rover, it’s just a car, one missing clip or small knick on these plastic covers or pillars won’t kill you. as you can see if you do some research, all these cars are made with the same flimsy pieces even if they are more expensive

just had mine done geezer left muddy footprints all over my carpets 😂 shoulda gone to this guy

Where did you get the U trim from please?

Moving to fast lol its not that quick

Hey man! How similar is this rear window to a 2003 Passat wagon?

Can you price up mine?

Hi could you please send me a price for mine?

where in Scotland are you from? I need a windscreen fitted to a mokka 2021 ultimate. I can get a uses one , what would you take for fitting it ? and what would a new one e cost

Awesome! Having the same issue with a C30. Thank you for the great video and explanation.

Sadly, I have to do these a lot as we work on Defenders etc etc. It's a 15/20 minute job at this stage, one I still don't enjoy. Nobody much will care/read, but I'll share my "Tips". 1. Use a Britpart seal. Reasons. They're 5mm too long out of the box - but that's close compared to most of the rubbish out there. Shorten yer seals, Britpart... 2. Use loads of glass cleaner to lube everything. Then spray on some more. Nope - even more. 3. Before you start & your head melts, orient the seal. The skinny slot that looks like nothing would fit in there is where the glass goes. Orient that so you're fitting the seal to the screen with you on the "Inside". The roundy edged "ope" is the one that goes over the screen surround. It's easy to look at the seal & go "WTF way does this go??" Despair might set in. That's normal. Ignore that & re-read what I said. It makes no sense until it starts making sense. Even then, it might not make sense. 4. Use a plastic trim tool to fit the seal to the screen - have the screen sitting up on wooden blocks at a comfortable height. This job will require exertion, arm fatigue, cursing & patience. Plus cursing. Go slow fitting the seal - slow is fast. 5. Getting the 4 corners on stops everything popping back off. Do those first. Otherwise you will curse more as the bits you did pop off. Use more glass cleaner. Spray some on your forehead at this stage too. . 6. Spray the vehicle with loads of glass cleaner. Try get some onto the windscreen flange. At this stage, you may not care where it goes - but try. Your arms will be aching from fitting the seal to the windscreen - if they are entirely wrecked, get a Pal to spray the flange. Go for a coffee now/cigarette/examine how you came to be here in Life. 7. Use a silicon nozzle to fit the cord into the seal - regarding "cord" - forget using 1 piece to go all around. Use 2 pieces & overlap them on the sides. Thank me later. It's about 700% easier & better. You now have 1 cord that does the top & the 2 top sides, another that does the bottom & the 2 bottom sides. If that doesn't make sense, ask. I'll explain better. 8. Don't press, pull, shove, bang or kick the screen when fitting - it'll break. Be gentle. You will want to press, pull, shove bang & kick - resist the urge. Trust the cord. The cord is your friend. Do both sides first - ickle by ickle or the screen will snap. Treat it like it was made out of glass... no, wait.. You don't need any suckers, pullers, fancy-dancy yokes or anything. Just cord. 9. Once it "pops" in - it won't pop in on your first few goes... go around the outside with the trim tool & sort the bits that are not popped in properly. 10 If none of that helps, we fit them for €120 including screen & fitting. A bit more if we have to supply the new seal as well. By step 4, you may just regard that as being a bargain.. I do too tbh. I hate doing these & we do clutches - I'd rather do the clutch.

And Price for job like this??

Which blades are you using on the Milwaukee? Fein?

Did you use a nibbler

Nice tools; was looking for backyard mechanic way, but was still good. Need to do a 2014 Focus soon; want to use a used windscreen from the wrecking yard that they are letting me take for free; only it's been 25 years since I worked at a small auto-glass shop doin that.

You don’t mess about, how much do you charge to fit a window in Ford Transit Custom?