Video

I have a question. Instead of tapping into a fuse block to kick on the relay. Can that trigger wire just come back to the positive side of the battery on a switch instead of using the key? Thanks hope it made sense lol

Thanks for the video, brother! Super helpful!

Thanks bro! I just installed one on my Yj and it was easy because of your video!! Tennessee Jeeps!!!!

Did your test, my gauge doesn’t move, and my sensor is new. You didn’t cover everything it seems.

Sing us a song your the mechanic man!

Hi, ty for the great videos, just one suggestion, it's way easier to get the pins out and reassemble the connector at the bottom that trying to pass it all together thru the steering column. Cheers !

Where are you at, I need to change my pinion bearings. And I am not confident enough, I’m near Crossville. I have a 2001 Jeep WJ 4.7 Quadra drive. Front differential is not good. I have taken the drive shaft out to hopefully not cause more damage. Do you know what it would cost for me to have it done, and who…. Thanks your video was very informative, but a little more than I can do, but would love to learn with someone who knows what they are doing.

GOOD VIDEO.

Hawk Tuah 16:46

Thanks for making this video, can’t find many other examples of people doing this and quite frankly I’m shocked. I worked in a metal fab shop for awhile last year and got a ton of this steel grate for free, I had the exact thought “ hook anywhere trailer deck “ , only problem I am having is I have a 2-1/2 inch axel so I’m guessing 3500 gAWR? So if I add the 5x10 length of my trailer deck in this stuff I think I’d be able to haul WAYYY less then just using a few sheets of plywood? My 2016 eco diesel grand Cherokee also can only tow 7000 lbs so what would your advice be??

Damn, brother, get a slingshot for that bird! lol. Seriously, thanks for this. Very well done.

You saved me. I was bout to give up with the project. Spent hours on internet breaking my head trying figure out, how to power up the fuse blocks without draw power from the actual wiring or without add a toggle switch. Thanks a lot

The windshield washer sprayer leaking? No way. Never in a million years would I have suspected them. I've been outside for an hour with a hose, spraying down everything from the bottom up, sometimes Id have the leak inside, but I couldn't seem to pinpoint it. I got my YJ from my late aunt, and years ago she had the entire thing rhino lined. I guess the rhino liner was, or is, the only thing holding the sprayer to the Jeep 😂😂😂 That stuff is so thick, I couldn't even tell all four of the screws are missing hahaha

This video is huge for what im trying to do!! I was using a push button to turn on all my accessories vs when i turn on my key on my 54 New Yorker. Ty

Where can I buy a brand new Heater box? are there any manufacturers that still make them? thanks

Thanks, super clean way to go!

Awesome video. I appreciate the step by step details and not just a fast forward version. Thank you. Very helpful.

Vids have been helping me for years drive to work. Did your alum output tail come with a copper peice that goes inside?

I can’t find the screws that are back on each side of the glove box. Where are they

Holy crap, i needed this so bad man. You did an awesome job on this video. Im wiring in an Aux fuse block into my truck, and this is gunna help a lot

If my input is low. Do you recommend putting the wiring harness apart to find a bad wire. Or is there anything i should do before I take on that job

Chuck use a very small window unit

The cowl vent drain tube on the 93 I just bought still had the crimp on the end. Cut that off and about to do a bottom up water test.

I'm curious to know if the 5 gallon difference means that the gauge will sit on EMPTY when you still have 5 gallons in the tank?.

Hey chuck great videos keep em coming anyway to get a power addicts sticker

May jeep jk 2018 is making a squeezy sounds when I am driving I thinking is the suspension

I wish you were my neighbor. I have a 87 YJ , I have replaced thermostat and water pump and I am still running hot. Flushed radiator and burped it. Is it more than likely a bad head gasket? Thank you

Great videos! I'm trying to troubleshoot my non working tachometer. Per my wiring diagrams, one of the roles of the green signal wire coming from the coil is to send signal to the tach. So something I should check is continuity from the coil plug (green wire) to the tach. If that's good, it may indicate a bad tach. Am I'm I thinking about this right? Trying to learn. Your videos are the best!

Super clean. Thanks for all you share.

Ok. That harness part you had a hard time putting back in. I need that female end that’s somewhat melted. What’s it called and where do I get it! The last plug in! THANK YOU!!

Do 99 jeep have door hing liners

Looking for the solution on the signal light indicator staying on the dash when the headlights are on. Did you ever post a video for the fix?

Your doing a amazing job man but wen u change the tcm do u have to have a dealer reprogram it or can u just put a nee one in and be good to go i only ask cuz my tcm is bad in my 2006

I would have used Rivnuts/nutserts instead of metal screws... Do you have a good way to put some posts somewhere on the jeep for jump starting other vehicles?

Now doesn't a 12,000lb. winch pull 300 amps? when pulling so wouldn't that blow that fuse every time?

The crankshaft position sensor in the glovebox was peak comedy

Smartly done 👍👍👍

I make my own electrical lugs from appropriately sized soft copper tubing. Flatten in vice and drill appropriate sized hole for the stud. I think they are superior.

If Power Addicts has ever helped you and you wanna contribute in some way, here are some links that can help make that happen. This here is an Amazon link that gives Power Addicts a small commission. Using this link costs you NOTHING more. amzn.to/39XSTTO The Paypal link is a simple way to make a simple donation if you want. Thank you for hanging out!! www.paypal.com/paypalme/PowerAddicts Thank you very much!! Have a great day!!

Hello, my 2004 Jeep Rubicon is taking longer to start. When I turn the key for 7 seconds, I have to do two to three on off cycles. Do you think this is the problem. I don't think you mentioned why you changed your filter?

You’re the man I’m doing mine in September

Thanks!

Great idea!

Good info

I can't wait to see the bumper build. I'm considering doing that myself. Thanks for sharing all you do!

Great video. Thanks for sharing.

Great video--thank you!! I am in the process of making this setup and using it on my custom van. SOO many accessories on it these two aux boxes will help. Can you tell me the gauge of the yellow wire that goes to the ignition on fuse? Thank you!

Great info!

by color rocker arms different materials ? why and what.

I got headlight issues!!! I have replaced the dash switch like in one of your videos, I have replaced both headlights, I have cleaned all connections with CRC electrical cleaner, I have removed and cleaned the grounds on engine and for the headlight housings, I think I’m not getting power to the bulbs…ps thanks for the steering column video I replaced mine and turn signals harness brake lights reverse lights and high beam switch all work