Video

What happend to you bro

I like that video nice bike is it hard to ride that bike with all that stuff on it i have a women's huffy Cranbrook cruiser 26 it's a good bike 👍👍

Bro. Its motor. ,esc ,. Total weight

My chime function degraded from a clear chime sound to a weak "thud" over the course of a few years. I fixed mine by: 1.) unplug power supply 2.) remove the four small black screws from the black plastic base under the silver chime bar. Small phillips screws driver as found in eye glasses repair kit will work. 3.) gently pull up on the lid (has digital display) until lid and chime/base/electronics assembly pulls out of bamboo clock casing. It is all one unit. MPORTANT: The chime striker mechanism is a silver cylinder with a small black rubber nipple that freely sits on top of a round, thin black foam pad and sits inside of a vertical sleeve in the base/electronics assembly. The rubber nipple faces up. The striker cylinder will naturally fall out of the base assembly sleeve when it is removed. (When the chime striker is engaged, an electrical current in the base assembly causes the chime striker cylinder to "shoot" up through the sleeve thus striking the chime bar. Over time the foam pad compresses which affects the chime cylinder's ability to strongly strike the chime) 4.) Remove the foam pad with a razor blade or knife. Scrape off any glue residue from the surface under the foam pad. 5.) Purchase a pack of those felt cabinet door bumpers that are green or brown in color. They are 1/16" thick and 3/8" diameter. They have self adhesive backing. I stacked 2 of them in place of the factory foam pad. This left the striker cylinder sitting slightly above the wood surface and my clock works perfectly again!! 6.) To reassemble, place striker cylinder on new felt pad then line up the display/lid hinges and push assembly/base/electrical unit down until flush with the wood surface. As long as you don't knock over the striker cylinder, it will slide back into the sleeve when you push the assembly/base/electrical unit down. 7.)4 small screws back in. Plug clock back in and set the timer function to 10seconds with the repeat mode on. This way the chime will strike ever 10 seconds and will allow you check the chime function. GOOD LUCK! I HOPE THIS HELPS.

Thanks for the video. A couple of observations. I would start out by finding a piece of tempered glass and build the box to fit the glass. I might use rear view mirror glue to make a double pane glass cover. Glue in a 1/4" spacer of plexiglass strips around the edges. Build the box so the glass fits down inside the box a little to protect the glass. I like the cast iron pot. I would leave it in the oven all the time so it would be pre-heated before I put the food in the pot. I see that the four sides fit the box and the triangles fill the spaces. I might tape the four sides at the botton to the box, then drill holes in the top corners of the four sides and tie string though the holes and lower the four sides to the angle I liked. Probably my latitude angle. Then measure the distance across the open space at the top to get my triangles width at the top end. Instead of a swinging pot I think I would use a piece of wire shelving with an angle on it to set the pot on if I needed to angle the box a little. I am working on a design and I have to say that I like yours for the durability of it. Thanks again for the video.

I just got a new bike at a garage sale and was looking for some ways to use my bike rack. This honestly is a pretty cool idea! Might do it for my own bike lol I just need to find some crates

Good job. There seems to be a design flaw with the wires that thread through the hinges.... I fixed that by replacing the wires with new silicone 24AWG wire. Also there seem to be a lot which cannot chime anymore or chime pathetically... I replaced the miniature 1000uF 25V electrolytic on the boost board and it got it's oompf back. These clocks are pretty cheesy but I love mine!

Not informative enough. Was the symptom that the display was not working? Show us how you took the part off!

I have one where the strike never worked; the adapter that came with it is 120V 60Hz 6W, so I don't understand how 12V would clear the motor.

What would’ve been helpful is to actually SHOW us *how* you fixed it! Kinda pointless to just talk about it.

You seriously need a good mic

Did you make that or is it something you bought? If bought? where from? If made, lets see how.

I found this video by following a link from a yoga channel. I can send you the link if you are interested. I checked out some of your other videos and its very much what I'm into. Anyway you gained a new subscriber.

Did anyone ever contact you to discuss if the idea was worth prototyping? Or does the physics not stack up?

So your instructions for fixing this broken chime is "take it apart". Extend "the" wires. There is a small motor inside (Somewhere?) that drives a striker. Never mentions what to remove, which screws need to come out. What parts look like. And of course, there is NEVER a view of the clock interior. So why are you babbeling on trying out different voltages of power supplies? If you want to use the word REPAIR in your title. Show repair then babble less.

Do you still use these lures?

Would it be easier to fix the wire that feeds juice to the plug? Yours probably got melted

is any one still watching this in 2020

nice DIY boat Sir.....I love it

I made a helpful video for how to carefully remove the brass clock face: czcams.com/video/SAHETPjrU9o/video.html

I may have a couple of these that I inherited from my grandmother I would never have thought to check these. What a perfect sound for meditating thank you 🙏🌿

Why do You diy'rs pick the very day it's too clowdy to cook ? I guess You are so proud of Your self. , You just can't wait for a sunny day !?

I bought the now and zen Shinto bowl version years ago and the striker never really struck hard enough to make a noise unfortunately

Very impressive! You've truly got the talent I'm lacking. I'd be very interested in purchasing one of your ovens. If you're interested in building and selling one to me, reply to my comment. Even if you're not interested I'm still very impressed and I'll be searching for a builder. Keep up the great work brother.

OK that is great but how about showing us HOW you carry bike up and down stairs. Thanks though.

Are the servos still holding up to the extra voltage.?

Sounds like a lot of cavitation. I didnt see if you did, but adding some blades to your out riggers might help get on plane

Modify and extend the wheel archers would look good.

No, don't paint the inside black. You need the reflector to concentrate the light. If you paint it, the sides will absorb all the light and the cookpot will get LESS!!

I just bought one of these to sell on eBay and then I see your description and it's almost identical to mine thank you continue to make videos but please get a better potato

Get the mylar camping emergency. Mirror reflection to keep body heat in glue the just as you did with foil

excellent effort , can this work as parabolic cooker as well.

you sir are a genius! Didn't occur to me - works great. thanks

wow, you might want to re-do this. The large gear is the spur, the smaller one is the clutchbell.

Hi sir can you provide the plans thanks aws7667@gmail.com

Discover how to do it with Avasva.

I was using my furnace blower as a fan it was working fantastic Incorporated with the Shop-Vac I turned into a swamp cooler. My dog and I were jumping for joy and doing backflips it was so great..... for about 10 f****** minutes. Starting to smell like something was getting hot then all the sudden it just turned itself off haven't wanted to plug it back in cuz I can't figure out what's wrong with it I don't want to burn it up... do you think it's because there's new relay in there I just wired the black and white cord to a plug-in plugged in

I did it with Avasva plans.

Try high temp stove paint. Do you still have if so how has it help up. This is the best looking DYI solar stove I have seen. If so do you have the measurements to give me an idea. Thank you.

Great video information to solve my problem with the pool pump

I don’t hear the meowing 😕

You didn't mention whether you had the transmitter turned on or off during the demo but I'm assuming off. The faint red blinking light on my esc comes on only when I turn on my controller otherwise it is green. Anyone else have this? Solution?

nice job ,how you get the angles ?

Great work on video mate

Good idea to put in that case

Good job. Thanks for posting the video. I will be building one myself soon. Been watching lots of videos.

Just google inplix ;) I made my own thanks to inplix instructions :)

Go to inplix if you'd like to build it yourself.

OMG!!!!just get a glow driver!!!!!

Wow. You are so clever and generous. I have lots of 16" flashing. I think it's quite reflective. So I'm going to make one of these. Thanks.