Video

Thinking My vent door actuator is not opening, I hear the motor but feel hardly any air.

Yay, finally found another Nissan 350Z with an automatic driver!

What year is that

Disconnect battery first and do a relearn after

I don’t understand.tou still didn’t gain an extra key so what was the point?

Thanks Jack!!! I bought 2 new fobs and haven’t program them just thinking about the money I’ll have to spend to program them… Thanks again!!! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

Can't hear anything you're saying through most of this.

Peugeot 107,(citroen c1 and toyota aygo) recepie is: 4.7uf capasitor and 50kohm resistor. Works like a charm💪

Thank you for this!

how were you able to put the new one back in? i’ve tried but there’s simply no clearance.

Thank you!

Geile Titten❤👍🤠🤠

Thanks for the simple, straight forward process. I was having trouble figuring out what to do reading the instructions (cause how it was being explained didn’t make sense). I’m a better visual learner than an auditory learner.

Is there any part at fault here? To me happens regularly.

You can talk powerplant operators through a nuclear meltdown.

Wow I thought the first was bad until I saw the second

Hey, I got an idea… let’s take a muscle car and turn it into a ghetto pos smh

Intake manifold runners are getting stuck or change sparkplugs That's it

Thanks man. Saved me alot of headaches.

I thought, 'I don't need a video; how hard can this be?' Then I looked at the manufacturer provided instructions and they are insanely incomprehensible. Worse than China bad translation; like they found a sheepherder from Afghanistan (no insult intended to sheepherders nor Afghans) who had never seen a foreigner and never zerked anything in their lives to write the instructions. I mean what does 'engage Staking on Rod' even mean?! So, thank you for making this video and taking something that should be easy and keeping it so.

06 toyota tundra doesn’t work tryed with 1 ohm or versus 1 mega ohm with 4,7 mf 50 v capacitors it gives po606 ecu code Any idea why

Thank you! The manual was useless.

I had a Saturn ion they didn’t have a key fob. All that comes with is a regular key and it makes no sense for it to be chipped. I took the chip out the old key and glued to the inside of the plastic next to the ignition, and it worked fine for years and years.

That cam chain tensioner is a tight sob.ok you got this bud.Brother it looks hot there.like Florida 😂.

Thank you for your video I am getting ready tighten the chain up on my son’s 4wheeler.

Thanks man, I appreciate you and the fact that you showed how to do it without taking me through all the bull to help.

Thank you so much! You just saved me from suffering through another hot Arizona summer!!! This worked and my AC is blowing COLD!

why drill holes... just use some crazy glue

worked great on 2 dead 18v black & decker. wondering how long they will continue to take a charge.

The loud TV in the back ground was very distracting.

Mine won't go into green zone. I've tried several cans, the needle initially oscillates in the greenzone then it goes downto white zone. Not sure if this is normal. I am using small 12oz cans. Maybe I should try the 15oz can you're using. Also, it helps to have one that has a longer hose to charge the Sprinter.

When I see an engine with orange glue everywhere ......

Thank you very much, just replaced mine, control and blower. Your video was quite helpful.

A lot of people cut the chip out of the key and glue the chip to the ring behind the ignition

How do you open thee box? My latch broke off when the box was closed.

😂

Thanks man!

Great video. Very detailed!

Great easy to follow video.Thank you.

Im about to do the same thing to my girls 05 Pathfinder. Thanks for this video;this short video showed me a lot.🎉

Hi, well done. Did You ever manage to repair old AC control unit?

Thanks for the video bro, life saver

owww thannkyou so much uncle❤❤ im beginner for an iphone so this vid does work, god bless you uncle

How many link is the chain long

Wow! It worked for Me, I have a 2003 Ford F150 Super Crew Cab Truck and I put the "Chipped-Key" right on the Ignition and the Ace-Harderware non-chip key in the ignition and it fired right up the first time. I think I will just attah my chipped-key to thr ignition and use the other non-chip keys since I only have the one chipped-key. Thanks for this information 😉👍

I have straight pipes and I need to delete the sensor so how will I do it ?dodge ram 1500

Well done. Good video and a good result. Thank You

For those who can't tell where the hose is. It is in between the engine and the fire wall. Where the air intake goes into the rear of the engine.

I watched another video which was a much quicker replacement of the starter. He didn't take any of the covers off at all. Just disconnected the starter from the battery, removed the starter attachment bolts, and dropped the starter down from underneath the cover. Inserted the new starter under the cover, reattached the bolts and the battery connections. Very quick and effective swap out.

Bro, I have E350 2010 I didn’t know what to do. I couldn’t find the right video but now you’re telling every step and how you cut it the perfect job I’m gonna go ahead and do mine. Thanks a lot God bless.