Video

This video is about a bypass, not a repair. You have to diagnose your problem. Does the engine spin by hand yes/no? If no then you know where to investigate further. Does the engine spin if you manually power the starter yes/no? If yes then your problem is upstream and likely electrical in nature.

@@Finite-Tuning yes it spins by hand.

@@Asanch79 : And the starter? Did you energize it, does it spin the engine?

@Finite-Tuning it'll spin but will not start. Unfortunately, i have spent money on repairs. New battery. New starter. New solenoid. New switches. New ignition switch. New fuel pump.

@@Asanch79 : This is why we test first, prove second, replace third, specifically in that order! Will the engine start on starting fluid?

Thank you!

I've been nothing but thrilled with this kit, I'll buy them again in a heart beat no hesitation, they've seriously been great! I've had to replace yet another caliper since I made this video, but not the brakes. I'll try for tomorrow to make a short update video on these, I'm not pulling wheels, but I should be able to get in pretty close to see. I have no problem with brake dust, or squealing, or anything else. I think these are incredible bang for the buck.

@@Finite-Tuning thank you

@@1Deejay7: I got to it pretty early this morning, the video is still processing but done enough to watch. Here is the update: czcams.com/video/oJNTXhbgYIU/video.html

No it doesn't! It makes it a BILLION times better.

No truer words ever put into text! Cheers 🍻

I showed exactly what I was doing in the video! But to upscale a typical 1.5 hour movie to 4K will take about 5 hrs with my hardware. Of coarse that number will change depending on your settings. If you do a double enhancement like I showed, that movie took almost 20 hrs if memory serves.

10 minutes? That's just a commercial then not a video. The day I even think of writing a script will be the day I close this account. But I am slowly getting better about cutting out non essential bits along with adding chapters. I might get good at it sometime before I die. 🤷‍♂

Without a serious GPU to go along with this program, you can expect .01 to .08 FPS to run the same task. The program gives you the option to choose which GPU that you want to use, if I only use the built in GPU on my i9, It would take 1 year and 3 months to render this movie (basically, sarcastically)! This program requires serious GPU power for this kind of work load, and a 4090 is the best of the best on the market, and you've seen all that it can do. Doing a double enhancement like I did on 4K video is pretty much a worst case scenario though. Other settings and features of the program would be less intensive. Most 4K videos I work on render at 8 FPS. It's a great program, but requires a liquid nitrogen cooled super computer to run a task like this any faster.

I've been thrilled with their brakes and rotors, but I have no experience with any of their other products. But I would definitely give them a try for control arms.

I always show and tell the best I can, but I'm happiest when others see what I have seen. Cheers man 🍻

Anytime, no problem!

Still there as far as I know. My cable management was nice and tidy, so that tape only needs to hold the feather weight driver itself. If it ever lets go though, I probably won't know until a wire breaks and I have reason to pull the lights again.

@@Finite-Tuning Thanks for the quick response. I installed them this evening.

@@TexasRaiser : Cheers 🍻

They're cheap regarding price, but their quality has proven itself to me! I'll put these on any and everything in the future. I'll make a quick update video soon to show how well these have held up so far. I've had yet another caliper fail, these brakes and rotors so far are outlasting brake calipers!

Good question, I've wondered the same about many systems. But without the actual hardware to test, a guess is all I can offer. In my honest opinion, I don't think an actual liquid nitrogen cooled super computer could do the same thing showed in this video, at anything better than 20 some frames per second! This type of video work is just the hardest thing to do here in the real world. I don't think there is anything on the market or elsewhere that can do the this job in real time. This job is the hardest thing I ask of a PC, and they all cry under this real world work load!

All of at least 100 different things! Start by making sure you can spin the engine crank shaft by hand. If yes, then manually power the starter motor, if that work then your problem is up stream in a wire or a switch most likely.

Yes, it's the best version of just this scene. It is also the absolute highest quality version anywhere on youtube 🥇.

Cheers 🍻

Cheers! 👍

Edit exactly how to "improve" the quality? This is already the absolute highest quality version of this clip you'll find anywhere on youtube, I made sure of it before I uploaded this video! Nobody else has this exact clip or quality level unless they got it from me.

@@Finite-Tuning I didn't mean quality as in the sound quality. Rather, I'd cut out the first few frames and the last few, leaving only the song. I'd also even out the volume, so it is everywhere the same. At some points it is a little quieter than others

@@Fh8919: I see. You can download it and add compression if you like, but it's multi channel Dolby Atmos, not 2 channel CD stereo. You'll loose all dynamic range by doing that, but you do you. Also, make sure you're listening to the correct version. The one here on YT has been re-compressed and modified by YT. The original version that I uploaded, the one I'm talking about can only be found here: drive.google.com/file/d/1uETumy_wIYet_TpRVS_9ju2kL4czCevr/view

All you fuckin fucks should read "about" a channel before watching and commenting on what has long since already been CLEARLY FUCKING STATED!

Sure, just use the contact info on my channel and let me know what you need. Cheers 🍻

@@Finite-Tuning awesome ty

@@Finite-Tuning realizing the new filmora 13 that just came out that I use has its own version. probably not as good but I’m just trying to make sure my 4k 25 fps looks more like 60 haha . A buddy mentioned ai frame rates to me went down a rabbit hole didnt even realize I’ve had it for a couple weeks

@@chawsae: How are you recording or capturing that you're limited to only 25 fps?

@@Finite-Tuning I have a used G7, I was running it with the SIM card that came with it because I dont know much about cameras but just got a new SIM card (had no idea how cheap they were) so now I can max it to 4k 30 fps. the export setting for the 4k 3D animated stuff i keep at 25 cause it’s a lot of files and time as it is haha.