Video

Yeah have fun with them and wear padded gloves since it's a rifle round

What's the weight on that bottom metal?

There is either a Tikka or a Sako in my not too distant future.Budget,however, would be the TC Compass with a 3-9 scope of some sort for $319 that I just ordered!

Tikka is the most impressive production rifle I've encountered for the money. I got a new T3x Compact 708 on gun broker, NIB, for $450. It is blued. Wish they made a left hand stainless in 708. For the past few years I've ordered AG Composite, McMillan, Stocky's stocks with vertical grips. The jury is still out but I think I prefer the traditional style. The 2 primary upgrades I've done with every Tikka is a lighter trigger spring and a Limbsaver recoil pad. Change the spring for sure. This is my first 708 ever and used it for the first time this past deer season. I used that exact Norma ammo to tag 3 deer at 300 yards. Only downside to Tikka that I kinda wish I had known about was their barrels are slower than most. I now own 24 Tikka rifles, two of which I rebarreled and a 3rd is in process. What I found was the Tikka barrels are, on average, 100-150 fps slower than an aftermarket barrel like a Brux, Benchmark, Krieger, or Bartlein. In my short barreled (compact) 708 that Norma 150 grain bullet is only going in the high 2400s to low 2500fps. At 300 yards it was dropping 20" from a 100 yard zero. The second factory ammo that shot extremely well is Hornady American Whitetail, I think it is a 139 grain bullet? I bough 2 cases of it and 2 cases of Federal Power Shok to try. Last modification I've done with a few of the factory black polymer stocks is paint them camo. Turned out excellent. I actually like the polymer magazines due to their weight and price at $20 each (auction).

And still under warranty!!! And still can't get one

I don't like that black button to release the bolt..Mines got a piece missing out it..Back ordered for over a year now 😒

So..if you buy a Savage!!! Don't rely on service to fast..

I recently picked up a Solus in 6 creed… I’ve been debating on trigger tech vs Timney… I like the stock trigger fine, but I’m a 2 stage guy. I also am fond of my area 419 arcalock rails. Shoot straight brother!

top action screw lol ok

You NEVER even posted an update after ya mounted the UltraDot...SMH

Great video Hunting!! Thank you!!

I just picked up a similar gun. It is just the basic mini action 1500 in 6mm ARC. I shot some HSM 95 GR Berger VLDS and HSM 75 GR Hornady Vmaxs and both were well under 1/2 MOA for a 3 and 4 shot group. Now if I could find a DECENT shooting 6mm ARC Barrel in AR 15. I have tried Ballistic Advantage which was ok and then upgraded to a Ranier Ultramatch and I was severely disappointed with accuracy and function. Anyone know of an AR 15 6MM ARC that is not so finicky like the Rainier.

Great video Sir! 🫡

Does the Shadow Systems slide function on the Zev frame?

DD is known for their customer service and great rifles. Love that color!

Excellent video … And kudos for sharing your phenomenal experience with the Dan Wesson Pointman Nine (PM-9) - I’m now ready to buy one! God Bless ☦️🙏🏻

Appreciate your honest review. Im curious to see if those defects affect the shootability. Id like to see a follow up video on your thoughts. Im still excited to get mine in 7mm prc. Ive always thought of savage as kind of the underdog that shoots great

Ag composites makes the carbon stock.

Les Baer manual also says 500rds break in period and they cost over $3000😮

Appreciated the review, thank you. More often than not, user error accounts for "issues." Hard to pass this up, but the consensus seems to be the APX A1 is good, but not exceptional. Did you find it immediately accurate at the range, or did it take you some time to figure it out? Aside from what I own, I've tried many guns and find them of varying accuracy. Most Sigs seems to work best for me without much adjustment, though of course there are others. Relative to an entirely different gun with an off-center and stuck, probably loctited front sight (no screw) which has thus far resisted movement when hit with a brass punch, any thoughts on how to move the bugger? Would heat possibly break the seal ? I hate to send it out to move the sight a fraction of a millimeter.

How did your Dan Wesson bruin work out has it become more dependable

Where did you get the grip tape for the front strap?

Is the barrel forged? Springfiled Armory gives you a forged frame, slide, and barrel at about half the price.

Thanks for reviewing. I see a light off to the side. Do you use it on the pro carry or another gun? If for pro carry, what brand/model?

Good stuff. Thx

My kids run this firearm in SASP. It’s going on its 5th season with a 11k plus round count. I can only remember a handful of malfunctions. Per the instructions I use Militec 1 and TW25B lubricants. It’s easily smoother running over my Brown 45 and half the price. I highly, highly recommended this Dan Wesson firearm.

Thank you sir for your video. I am interested in this rifle in a 308. What tool did you use to remove the factory muzzle brake? Did the manufacturer cerakote the barrel with muzzle brake installed? If so did you see any cetakote on the muzzle brake threads?

I'll be picking mine up soon!

The poor man’s Sako TRG, the chassis is actually TRG compatible, I just ordered this in .308 m24 contour can’t wait, unfortunately in Washington State, I won’t see it for 3 weeks.

If you haven't already done so, you should contact Savage customer service. They've been very good to deal with, in my experience. Sorry you've had some issues. I just bought the same gun in .308 and it's flawless, just as I'd expect of Savage's quality. (I own a BUNCH of Savage rifles and never had any problems like that.) Plus, I didn't care about the muzzlebrake because it's getting replaced with a suppressor anyhow.

I bought similar parts for a LEO Glock 21 SF that has a 12 lb trigger. Hope I have the same luck you had. Think I spent about 75 on the parts.

There you go bro. Now that's a rifle

If you want to use the decocker you need to pull the slide back some, and then press it.

Nice video! Just subscribe! Thinking about getting the azimuth.

What does it weigh?

Just got mine in competition chassis, it also loves the cheapest Winchester USA ready select ammo. It shot a 8 shot group a quarter inch hole at 100 yards. So glad I don't have to buy match grade ammo to get match grade results with this gun!

I am putting my trigger tech primary out of my bergara premier into my .308 solus barreled action

It’s a way you add a safety on both sides

What did you zero that rile at 100 yards, 200yards?

Great solid review man! Quick question, are you able to have full 3 fingers grip? I have big hands and I am debating getting the C or the FS.

Just got turned on to this...

Great information I was actually considering purchasing this particular model still may but I will want to see it in person excellent video keep up the good work thank you

Nice to see a review from someone who know guns inside out. Thanks!

cant wait to get mine in a week , kimber truely makes the best looking 1911's on the market imo with outstanding performance aswell

Added a DDM4 V7 coupe years ago. Added a Geissele two stage trigger and a Trijicon LPVO. Great rifle.

Experience taught me any 1911 that's got tight tolerances needs a break in period no matter what people claim. Especially if you're running one that was hand fit.

Gonna try this with another shoe for my Dagger. Hate that hinged curve trigger. Thanks for this

Thanks for sharing your experience with these triggers. I've tried Ghost lady connector and might try Avenger . Awesome content.

STC Frame seems like a good bargain and. with Polymer 80 in litigation I think I might build a STC build.

Super nice toy! Ive had the pleasure of shooting a few of them. I just haven't purchased one (yet). I like building vs buying but I can make an exception for DD. Thanks for sharing. Just sub'd. Keep going.