Video

Nice review!

I just bought the Hazet 600spc set. The finish isn’t great and there are chips on many spanners. I also have the Stahlwille open box 13 set of spanners and they finish is great, every detail is manufactured accurately. It’s a pleasure to use them. I’m thinking of if I have done the right choice with the Hazet, let’s see in practice, or I could have gone with an alternative which would have costed half the cost, like Tekton

Great video. I have zero negative comments. Keep on putting videos like this out there. I am having a similar issue with mine and would rather rebuild like u did instead of replacing it and putting another unnecessary item in a landfill for future generations to deal with. Thank you for all the details.

Awesome job! Thanks for sharing!! Gave me the confidence to open mine up and fix it up like you!!

I can't get the port plate off of the vacuum. I have a new Valve carriage.

Who gives a fk about the case

Gonna try to fix the one I have. Hope I can do it. I found a list somewhere that this part is the same as some other Dysons. Couldn’t find it under DC 14 but found it for a 7. They are a little hard to find.

Hello there! What's the difference between resistor and motor? Thnx..

if u buy stuff from those type of sites you kinda get what u pay for lol.

Thanks for this video. You saved me lots of time and $$$. In 2024, your video is the most detailed in comparing bit holders offered by Wiha, Kobalt, Wera, etc.

Thank you for this video. Here in 2024 using this to figure out what’s wrong with mine and how to fix it.

cheap PCB barely populated and no calibration pots etc. I have an excellent condition Genuine Hakko 191B if inerested?

The wera example is a 4mm nut driver

That was a great help! I have the exact same problem. You wouldn’t by any chance have any extra metal film capacitor 225k 250vac?

This years advent calendar has the wera 4mm micro handle. Same still available on amazon

Good video. Did you figure out what the problem was?

IDK I think I like the old quick release ratchet better

What are them l shape metal rack things called

I was able to purchase the bearings recommended by you and get the thing apart and put back together and working! Thanks so much.

What’s the name of that cover can’t find anywhere and my filter leaks in that área

Top thank...

Do not confuse Triwing Y bits with Microstix "trilobe" found in Apple devices you WILL strip out a Microstix with a Triwing Y bit

can also readjust with pliers but it is risky

I have the same broken part on the same vacuum cleaner. Dyson is overpriced AND overrated.

You didn’t show the disassembly which is what I rell y needed. Ours is several years pld so not sure if some parts are sticking together or if I'm missing a tab and will break it. I guess it wont matter if I "break" it further. Ours won't even turn on. Good info though.

Can you do a video on how you crimped the ground and set that up?

These are lithium ion batteries I use them too I disassembled one they have 2 pouch style lithium ion battery cells rated about 600 mAh I used my rc battery charger to do a capacity test I found them to have a real capacity of 560 and th3y can handle a 2 to 3 Amp discharge rate without issues the bms inside is what will terminate charging not the charger if you exceed 3 Amp on discharge the bms will be damaged it is something I learned while testing to determine what they could do if you treat them well the will last a very long time

Found this pump online for a winter deal at $99 about 8 years ago! Just recently the bearings started to scream! Thanks for the vid! Been searching for info on tearing it apart and bearing sizes before I get into it. Curious how it’s holding up. Most of the cheap 6082rs bearings I’m finding are oiled low rpm for skateboards. Should I look into greased NSK or something? Just don’t want them to go out in a year.

Exactly the same problem in exactly the same spot with exactly the same Cap …😂. And all through the tear down I was scratching my head saying “Somebody did in t want me to get in here. Amazing… Thank you for posting! I live in Japan, so now I’m off to Aliexpress I guess (thought for sure Digikey would have them too 😢). Thank you again!

i like your research work;) what do you think is the best flat head?

At 7:07, you segue from an apparent un-necessary removal of the wheel to having the valve seat (??) completely removed - one of the most critical parts of this process that isn't shown!

I have a set of Hazet wrenches I love them but was irratated with one wrench. I got a 13mm wrench with a noticable warp , I got over it but sttill.

How much did you pay for ir

Thank you for this video! I replaced 3 parts to my DC 14 Dyson cause I couldn’t find a better vacuum cleaner. This part was the hardest but with the help of your video I did it!!! Thanks again, Cindy

Dude same progression of tools here as you lol. From the Walmart to the kobalt to wiha even the Nintendo screwdriver just to get into a GameCube controller haha. I had to go to pawnshops and electronics stores finally a guy had one at a repair shop I talked into selling to me. And now I'm getting into wera

Mine is completely bent will it still work

Are they hollow shaft??

For me the ground part is chipped from my brother accidentally stepping onto the headphone jack while it was in the controller and it bent it and I don’t know how to rid it

Slip test?

Several of mine are curved as well. Not an illusion.

Did you by any chance make a vid on how to repair the faulty transistor meaning the one you already have? Instead of buying a new one ☝️👍😎

Can i use a 225j 400v capacitor? Will the extra voltage rating cause higher ESR and ripple current?

If you can afford a domino ma$$$hine, why not just buy a real 4-post server rack?

Thank you so much for this video, very helpful!

Hey, super video! I really appreciate you going through it with the pages from the manual and going into that extra detail. To me, this is the best of CZcams!

12705, Pump Motor & Control for 12in Sand Filter Pump 26645 (ORG SP 12491EG) I need a cord

Nice buddy

600 to 1000 Nm is a 66.67% increase. (If it was 500 to 1000 it would be a 100% increase.) Of course 1000 to 600 is a 40% decrease. I'm sure that's what you meant by "it's 40%". I just mention this because some tool folks are not really math folks and may not understand, plus a comment adds to your youtube juice.

Same headset to

The headset is a £25 headset